1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of the LevelOne FCS-5202 Gemini 4 MP Fixed IP Camera. The FCS-5202 is an outdoor fixed camera designed for reliable and cost-effective IP surveillance networks. It is built to withstand various environmental conditions, including rain, extreme heat, snow, dust, and humidity. This camera delivers clear 4-megapixel resolution images and supports 802.3af Power over Ethernet (PoE) for combined power and data transmission over a single Cat.5 cable.
2. Proizvod je gotovview
2.1 Ključne karakteristike
- 4 Megapixel High-Definition Resolution for clear and sharp images.
- Supports H.264, H.265, and MJPEG video compression for efficient storage and streaming.
- Integrated 802.3af Power over Ethernet (PoE) for simplified installation with a single cable.
- IP67 Weather-Resistant Casing ensures durability in outdoor environments.
- Advanced Motion Detection capabilities, including intrusion, camera tampering, and line crossing detection.
- Event notification support for immediate alerts.
2.2 Sadržaj paketa
- LevelOne FCS-5202 IP Camera
- Installation Guide (refer to this manual)
- Pribor za montažu
2.3 Dijagram kamere
Slika 1: Prednja i bočna strana view of the LevelOne FCS-5202 Gemini 4 MP Fixed IP Camera, showing the lens, IR LEDs, and mounting bracket.
3. Postavljanje i instalacija
3.1 Sigurnosne mjere
- Uvjerite se da je napajanje isključeno prije instalacije ili održavanja.
- Install the camera in a location that provides optimal viewing and is protected from direct impact.
- Koristite odgovarajući alat i pridržavajte se lokalnih električnih propisa.
3.2 Fizička instalacija
- Odaberite lokaciju za montažu: Select a suitable outdoor location, preferably under an overhang, that offers a clear field of view and is within reach of a network cable with PoE.
- Montirajte nosač: Use the provided mounting accessories to securely attach the wall mount bracket to the chosen surface. Mark and drill pilot holes as necessary.
- Pričvrstite kameru: Secure the camera to the mounting bracket. Adjust the camera's angle and orientation for the desired coverage.
3.3 Priključak na mrežu i napajanje
- Spojite Ethernet kabel: Connect a Cat.5 or higher Ethernet cable from your PoE-enabled switch or PoE injector to the camera's Ethernet port. This single cable will provide both power and data.
- Uključeno: Once the Ethernet cable is connected to a PoE source, the camera will power on automatically. Allow a few minutes for the camera to boot up.
3.4 Početna konfiguracija
- Otkrijte kameru: Use the LevelOne IP Camera Finder tool (available on the LevelOne website) or a network scanner to locate the camera's IP address on your network.
- Pristup Web Interfejs: Otvori a web browser and enter the camera's IP address. You will be prompted to enter a username and password. Refer to the default credentials provided in the camera's packaging or on the manufacturer's website.
- Promjena zadanih vjerodajnica: For security purposes, immediately change the default username and password to strong, unique credentials.
- Mrežne postavke: Configure network settings such as static IP address (recommended for surveillance devices), subnet mask, gateway, and DNS servers as per your network requirements.
- Datum i vrijeme: Podesite tačan datum i vrijeme, po mogućnosti sinhronizacijom sa NTP serverom.
4. Uputstvo za upotrebu
4.1 Uživo View
After logging into the camera's web interfejs, idite na "Live View" section to see the real-time video feed from the camera. You can typically adjust stream quality and view options here.
4.2 Video snimanje
- Kontinuirano snimanje: Configure the camera to record video continuously to a Network Video Recorder (NVR) or network-attached storage (NAS).
- Snimanje aktivirano događajem: Set up recording to activate only when specific events occur, such as motion detection.
- Planirano snimanje: Define specific time periods for recording.
4.3 Motion Detection and Event Management
- Konfigurišite zone detekcije: In the camera's settings, define specific areas within the camera's view gdje bi detekcija pokreta trebala biti aktivna.
- Postavke osjetljivosti: Adjust the sensitivity of motion detection to minimize false alarms.
- Akcije događaja: Specify actions to be taken when an event is detected, such as:
- Sending email notifications.
- Uploading recorded video clips to an FTP server.
- Triggering an alarm output (if available).
4.4 Daljinski pristup
To access your camera remotely, you may need to configure port forwarding on your router or use a cloud-based service provided by LevelOne or a third-party NVR. Consult your router's manual or network administrator for port forwarding instructions.
5. Održavanje
5.1 Čišćenje kamere
- Redovno čistite objektiv i kućište kamere mekom,amp cloth to remove dust, dirt, and water spots.
- Do not use harsh chemicals or abrasive cleaners, as these can damage the lens or casing.
- Prije čišćenja provjerite je li kamera isključena.
5.2 Ažuriranja firmvera
Periodically check the LevelOne official website for firmware updates. Firmware updates can provide new features, improve performance, and enhance security. Follow the instructions provided with the firmware update package carefully.
6. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Kamera se ne uključuje. | No power from PoE switch/injector; faulty Ethernet cable. | Verify PoE source is active. Check Ethernet cable connection and integrity. Try a different PoE port or cable. |
| Nije moguće pristupiti kameri putem web pretraživač. | Netačna IP adresa; problem sa mrežnom vezom; zaštitni zid blokira pristup. | Confirm camera's IP address using discovery tool. Check network cable. Disable local firewall temporarily or add exception. Ensure camera and computer are on the same network segment. |
| Loš kvalitet slike. | Dirty lens; improper focus (if adjustable); low light conditions; network bandwidth issues. | Clean the lens. Check camera settings for resolution and quality. Ensure adequate lighting. Verify network bandwidth is sufficient for video streaming. |
| Motion detection not working or too many false alarms. | Incorrect sensitivity settings; detection zones not configured properly; environmental factors (e.g., moving branches). | Adjust motion detection sensitivity. Refine detection zones to exclude irrelevant areas. Consider environmental factors. |
7. Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | FCS-5202 |
| Rezolucija | 4 megapiksela |
| Video Compression | H.264, H.265, MJPEG |
| Povezivanje | Wired (802.3af Power over Ethernet - PoE) |
| Izvor napajanja | 802.3af PoE or 12V DC (Power adapter not included) |
| Potrošnja energije | 5.76 Watts |
| Materijal | Metal |
| Usage Environment | Na otvorenom |
| Weather Resistance | IP67 ocijenjeno |
| Dimenzije (D x Š x V) | 6.05 x 15.4 x 7 cm (2.38 x 6.06 x 2.76 inča) |
| Težina | 640 grama (1.41 lbs) |
| Vrsta montaže | Nosač za montažu na zid |
| Preporučena upotreba | Motion detection, Outdoor surveillance |
8. Garancija i podrška
For warranty information, please refer to the documentation provided with your purchase or contact your reseller. LevelOne provides technical support for its products. For assistance, please visit the official LevelOne webstranice ili kontaktirajte njihov odjel za korisničku podršku.
Online resursi:
- LevelOne Official Webstranica: www.level1.com
- Stranica za podršku proizvoda: Traži FCS-5202 on the LevelOne website for drivers, firmware, and FAQs.
