CPVAN Remote Control (2nd Generation) Instruction Manual

1. Proizvod je gotovview

The CPVAN Remote Control (2nd Generation), model CP10 Pro, is designed for wireless operation of compatible CPVAN home security systems. This remote provides convenient control over your alarm system's functions from a distance.

Kompatibilnost: This remote control is compatible with CPVAN CP2, CP2 Pro, CP7R, CP8, and CP9 Home Security Systems.

Slika 1: Prednja strana view of the CPVAN remote control.

2. Ključne karakteristike

• Bežični rad: Provides convenient control of your alarm system without physical interaction with the main unit.
• Široka kompatibilnost: Works with CPVAN CP2, CP2 Pro, CP7R, CP8, and CP9 alarm systems.
• Kontrola na daljinu: Enables control of the motion sensor detector alarm from a significant range.
• Spremno za upotrebu: Comes with a pre-installed battery for immediate functionality.
• Ergonomski dizajn: Features a comfortable and user-friendly form factor.

3. Sadržaj paketa

• CPVAN Remote Control (2nd Generation)
• 1 x CR2 baterija (unaprijed instalirana)

4. Podešavanje i uparivanje

Uparivanje s novim daljinskim upravljačem

To integrate your new remote control with a CPVAN PIR motion sensor alarm, follow these steps:

1. Ensure the PIR motion sensor alarm is powered ON.
2. On the PIR motion sensor alarm, long press the Pairing button (often indicated by a signal icon) to enter pairing mode. The detector light will illuminate continuously.
3. Press any button on your remote control. You will hear two beeps from the alarm to confirm successful pairing.
4. Short press the Pairing button on the alarm again to exit pairing mode. Your remote has now been paired.

Image 2: Pairing process of the remote control with a motion sensor alarm.

5. Operacija

Funkcije daljinskog upravljača

The CPVAN remote control features four distinct buttons for managing your alarm system:

Image 3: Labeled buttons on the CPVAN remote control.

• Arm Button (Locked Padlock Icon): Activates the alarm system, placing it in armed mode.
• Disarm Button (Unlocked Padlock Icon): Deactivates the alarm system, turning off armed mode.
• Adjusting Volume Button (House Icon): Typically used to switch between different alarm modes or adjust volume settings on the connected alarm unit. Refer to your main alarm system manual for specific functions.
• SOS dugme (SOS tekst): Triggers an immediate emergency alarm. Use in situations requiring urgent attention.
• LED indikator: A small light that illuminates to indicate button presses and operational status.

6. Održavanje

Zamjena baterije

The remote control is powered by one CR2 battery. When the remote's performance degrades or the LED indicator fails to light up upon button press, it may be time to replace the battery.

1. Pronađite odjeljak za baterije na daljinskom upravljaču. Obično se nalazi na stražnjoj ili bočnoj strani, pričvršćen malim vijkom ili kopčom.
2. Pažljivo otvorite pretinac.
3. Uklonite staru CR2 bateriju.
4. Insert a new CR2 battery, ensuring correct polarity (+ and -).
5. Čvrsto zatvorite odeljak za baterije.

Vrsta baterije: 1 x CR2 (3 Volts, Lithium Manganese Dioxide)

7. Otkrivanje problema

• Daljinski ne reaguje: Check the battery. Replace if necessary. Ensure the remote is within the operating range of the alarm system.
• Neuspjeh uparivanja: Ensure the alarm system is in pairing mode. Repeat the pairing steps carefully. Check if the remote's battery is charged.
• Slučajna aktivacija: The remote keys can be sensitive. Avoid placing the remote in pockets or areas where buttons might be pressed inadvertently.

8. Tehničke specifikacije

Image 4: Dimensions of the CPVAN remote control.

9. Korisnička podrška

For further assistance, technical support, or warranty inquiries, please refer to the main manual of your CPVAN Home Alarm System or visit the official CPVAN website. You can also contact CPVAN customer service through the retailer where the product was purchased.

Proizvođač: CPVAN

Broj dijela: CP2-RC