1. Uvod
This manual provides essential information for the proper installation, operation, and maintenance of your First Alert SMI100-AC Hardwire Interconnect Smoke Alarm with Battery Backup. This device is designed to provide early warning of smoke and fire hazards, utilizing Precision Detection advanced sensing technology to minimize nuisance alarms while ensuring timely alerts. For optimal safety, please read these instructions thoroughly before installation and retain this manual for future reference.
Image: Three First Alert SMI100-AC smoke alarms, illustrating the product in a multi-pack configuration.
2. Važne informacije o sigurnosti
Adherence to these safety guidelines is crucial for effective smoke alarm operation and personal safety.
- Never ignore a smoke alarm. Responding promptly to an alarm can save lives.
- Redovno testirajte alarme. Perform weekly tests to ensure proper function.
- Replace batteries annually. Even with hardwire power, the battery backup is vital.
- Replace the entire alarm unit every 10 years. Smoke alarms have a limited lifespan.
- Ne farbajte alarm. Paint can interfere with the sensor's ability to detect smoke.
- Ensure proper placement. Follow recommended guidelines for installation locations.
3. Postavljanje i instalacija
The First Alert SMI100-AC smoke alarm is designed for hardwire installation with a battery backup. Professional installation is recommended if you are not familiar with electrical wiring.
3.1 Uključene komponente
- SMI100-AC Smoke Alarm Unit
- Montažni nosač
- Quick Connect Power Cable
- 9V alkalna baterija
- Montažni vijci i ankeri
Image: Individual components of the First Alert SMI100-AC smoke alarm, including the alarm unit, mounting bracket, wiring harness, and 9V battery.
3.2 Napajanje uređaja
- Install Battery Backup: Open the battery compartment and connect the included 9V alkaline battery, ensuring correct polarity. Close the compartment securely. The battery provides continuous protection during power outages.
- Hardwire Connection: Connect the Quick Connect Power Cable to your household electrical wiring (120V AC, 60Hz). Ensure power is turned off at the circuit breaker before beginning any wiring. The Quick Connect Plug simplifies installation and allows for easy replacement without rewiring.
Image: Close-up of the Quick Connect Plug, highlighting its design for easy installation and replacement.
3.3 Montiranje alarma
- Secure the mounting bracket to the ceiling or wall using the provided screws and anchors.
- Connect the Quick Connect Power Cable to the smoke alarm unit.
- Align the alarm with the mounting bracket and twist clockwise until it locks into place.
- Restore power at the circuit breaker. The green power indicator light on the alarm should illuminate, confirming AC power.
Image: A person installing a smoke alarm on a ceiling, demonstrating the recommended practice of installing alarms on every level and in every bedroom.
3.4 Interconnection Feature
This smoke alarm features an interconnect capability. When one compatible First Alert interconnect alarm sounds, all other interconnected alarms will also sound, providing an early warning throughout your home.
3.5 Preporučeni položaj
For optimal protection, install smoke alarms on every level of your home, including basements and attics, and inside every bedroom. Additionally, place alarms in hallways and living areas. Avoid placing alarms near windows, doors, or air vents where drafts might interfere with smoke detection.
Image: A diagram illustrating recommended placement of smoke alarms, carbon monoxide alarms, and fire extinguishers throughout a multi-level home, including bedrooms, hallways, living rooms, kitchens, basements, and garages.
4. Operacija
4.1 Testiranje alarma
Test your smoke alarm weekly to ensure it is functioning correctly. Press and hold the Test/Silence button on the alarm cover until the alarm sounds. The alarm will emit a loud, pulsating sound. Release the button. If the alarm does not sound, refer to the Troubleshooting section.
Image: A person testing a smoke alarm by pressing the test button, emphasizing the importance of regular testing.
4.2 Funkcija utišavanja
In case of a nuisance alarm (e.g., from cooking smoke), you can temporarily silence the alarm by pressing the Test/Silence button. The alarm will enter a temporary silence mode for approximately 10 minutes. If the smoke condition persists, the alarm will reactivate.
4.3 Indikatorska svjetla
- Zelena LED: Indicates the alarm is receiving AC power.
- Crveni LED: Flashes during an alarm condition or when the Test/Silence button is pressed.
4.4 Šta učiniti kada se oglasi alarm
If the smoke alarm sounds, immediately implement your family's escape plan. Do not re-enter the building until authorities have declared it safe. If it is a nuisance alarm, use the silence feature and ventilate the area.
5. Održavanje
5.1 Zamjena baterije
The 9V alkaline battery should be replaced at least once a year, or immediately when the alarm chirps approximately once a minute, indicating a low battery. Use only a 9V alkaline battery (e.g., Duracell, Energizer, or Eveready brands).
5.2 Čišćenje alarma
Clean your smoke alarm at least once a month. Use a soft brush or vacuum cleaner attachment to remove dust and debris from the alarm's cover and vents. Do not use water, cleaners, or solvents, as these can damage the unit.
5.3 Alarm Replacement
Smoke alarms have a limited operational life. The First Alert SMI100-AC should be replaced at least every 10 years from the date of manufacture. Refer to the date printed on the back of the alarm.
Image: A person holding a smoke alarm, with text indicating the recommendation to replace alarms at least every 10 years.
6. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Alarm chirps once a minute | Niska baterija | Zamijenite alkalnu bateriju od 9V. |
| Alarm sounds frequently without smoke | Nuisance alarms (cooking smoke, steam), dust buildup, improper placement | Use silence feature, ventilate area, clean alarm, relocate if necessary. |
| Alarm se ne oglašava tokom testa | No power (AC or battery), faulty unit | Check circuit breaker, replace battery, ensure proper connection. If problem persists, replace unit. |
| Green LED is off | Nema AC napajanja | Check circuit breaker, ensure proper hardwire connection. |
7. Specifikacije
- Model: SMI100-AC
- Izvor napajanja: 120V AC, 60Hz hardwire with 9V Alkaline Battery Backup
- Tip senzora: Ionizacija
- Vrsta alarma: Zvučni alarm
- interkonekcija: Yes, with compatible First Alert alarms
- Dimenzije: 5 cm D x 5 cm Š x 5 cm V (približno)
- Težina: Otprilike 9.8 unci
- Radna temperatura: 40°F (4.4°C) do 100°F (37.8°C)
- Radna vlažnost: 10% do 95% relativne vlažnosti, bez kondenzacije
8. Garancija i podrška
For detailed warranty information, technical support, or to register your product, please visit the official First Alert webweb-mjesto ili kontaktirajte njihovu korisničku službu. Sačuvajte račun kao dokaz o kupovini za reklamacije u slučaju garancije.
First Alert Webstranica: www.firstalert.com
