Uputstvo za upotrebu za Sensio fleksibilnu LED traku u roli

1. Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Sensio Flexible LED Strip Roll, Model Radiant SE10555. This high-performance LED strip is designed to provide a uniform light line without visible individual LED dots, making it ideal for various indoor lighting applications, including kitchens and bathrooms. It is bendable, dimmable, and features high color rendering index (CRI >90) for accurate color representation.

Image: Sensio Flexible LED Strip Roll (5m) on its spool, ready for installation.

2. Sigurnosne informacije

Please read all safety warnings and instructions carefully before installing or operating the LED strip. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Uvijek isključite napajanje na glavnom prekidaču prije instalacije ili održavanja.
• This product is designed for 24V DC operation. Ensure you use a compatible 24V LED driver (NOT INCLUDED). Connecting to an incorrect voltage will damage the strip.
• Do not bend the LED strip sharply or twist it excessively, as this may damage the internal circuitry.
• Osigurajte da su svi priključci sigurni i pravilno izolirani kako biste spriječili kratki spoj.
• Do not submerge the LED strip in water unless explicitly rated for such use. This product has an IP65 rating, meaning it is protected against dust ingress and low-pressure water jets, but not full submersion.
• Čuvati van domašaja djece.
• Do not cover the LED strip with materials that may impede heat dissipation, as this can lead to overheating and reduced lifespan.

3. Postavljanje i instalacija

The Sensio Radiant LED strip is designed for easy surface or recessed mounting. Follow these steps for proper installation.

3.1. Uključene komponente

• 1 x Sensio Flexible LED Strip Roll (5m)
• Mounting brackets (quantity varies based on length, typically 6 or 10)
• Screws (quantity varies, typically 6 or 10)
• Završne kapice (2)
• 2.5m driver connection cable at each end with JB4 connector

Image: Visual guide to included components and initial installation steps.

3.2. Installation Steps (Surface Mounted)

1. Priprema: Ensure the mounting surface is clean, dry, and smooth. Measure the desired length for your LED strip. Remember the strip can be cut at 50mm intervals.
2. Rezanje (ako je potrebno): If shortening the strip, identify the scissor icon marks located every 50mm along the strip. Carefully cut the strip only at these designated marks using sharp scissors. After cutting, apply the provided end caps to the cut end(s) to maintain the IP65 rating.
3. Mounting Bracket Placement: Position the mounting brackets along the measured path. Mark the screw holes with a pencil. Ensure even spacing for secure installation.
4. Sigurne zagrade: Drill pilot holes if necessary and secure the mounting brackets using the provided screws.
5. Insert LED Strip: Carefully press the LED strip into the secured mounting brackets. Ensure it sits snugly and evenly.
6. Connect to Driver: Connect the 2.5m driver connection cable (with JB4 connector) from the LED strip to a compatible 24V DC LED driver (NOT INCLUDED). The JB4 connector ensures correct polarity.
7. Uključeno: Nakon što su svi priključci sigurni i provjereni, vratite napajanje u strujno kolo.

Note: For recessed mounting, appropriate channels or profiles (not included) may be required.

4. Uputstvo za upotrebu

The Sensio Flexible LED Strip Roll is designed for straightforward operation once installed.

• Uključivanje/isključivanje: The LED strip will illuminate when power is supplied to the connected 24V DC driver. Control power via the switch connected to your driver's input.
• Dimming: This LED strip is dimmable. To utilize the dimming feature, you must connect it to a compatible Sensio dimmable receiver and dimmer switch (both sold separately). Follow the instructions provided with your dimmable receiver and switch for proper setup and operation.
• Temperatura boje: This specific model provides a Warm White light at 3000K. Other models are available in Natural White (4000K) and Cool White (5000K).

Slika: prample of the LED strip providing ambient lighting under a kitchen counter.

5. Održavanje

The Sensio Flexible LED Strip Roll requires minimal maintenance to ensure long-lasting performance.

• čišćenje: Ensure the power is off before cleaning. Gently wipe the surface of the LED strip with a soft, dry, or slightly damp krpu. Ne koristite abrazivna sredstva za čišćenje, rastvarače ili prekomjernu vlagu.
• inspekcija: Periodically inspect the strip and its connections for any signs of damage, wear, or loose connections. Address any issues promptly.
• Rasipanje topline: Ensure the LED strip is not covered or obstructed in a way that prevents proper heat dissipation. Good airflow contributes to the longevity of the LEDs.

6. Otkrivanje problema

If you encounter issues with your Sensio Flexible LED Strip, refer to the following common problems and solutions:

7. Specifikacije

Detailed technical specifications for the Sensio Flexible LED Strip Roll, Model Radiant SE10555.

Image: Technical diagram illustrating dimensions and key specifications.

Note: Driver is NOT INCLUDED and must be purchased separately.

8. Garancija i podrška

For warranty information, technical support, or further assistance with your Sensio Flexible LED Strip Roll, please contact Sensio customer service directly. Refer to the product packaging or the official Sensio webstranicu za najnovije kontakt podatke i uslove garancije.

Također možete posjetiti Sensio Store on Amazon za više informacija o proizvodu i resurse podrške.