Barska Pursuit-200 (BE12748)

Barska Winbest Pursuit-200 Komplet za terenski detektor metala - uputstvo za upotrebu

Model: Pursuit-200 (BE12748)

Marka: Barska

1. Uvod

This manual provides detailed instructions for the assembly, operation, and maintenance of your Barska Winbest Pursuit-200 Metal Detector Field Kit. Please read this manual thoroughly before using the product to ensure proper function and longevity.

The Pursuit-200 Metal Detector Field Kit is designed for detecting various metals and includes a main metal detector with an LCD display, a handheld wand detector, headphones, a folding shovel, and a soft carrying case.

2. Sadržaj paketa

Provjerite da li se u vašem paketu nalaze sve dolje navedene stavke:

Barska Winbest Pursuit-200 Metal Detector Field Kit components

Slika 2.1: All components of the Barska Winbest Pursuit-200 Metal Detector Field Kit, including the main detector, wand detector, headphones, shovel, and carrying case.

3. Podešavanje

3.1. Assembling the Main Metal Detector

  1. Pričvrstite zavojnicu za pretraživanje: Secure the search coil to the lower stem using the provided bolt and nut. Ensure it is firmly attached but allows for slight angle adjustment.
  2. Connect the Lower and Middle Stems: Insert the lower stem into the middle stem and secure it with the spring clip or locking mechanism.
  3. Attach the Control Housing: Slide the control housing onto the upper stem. Adjust the armrest for comfort and secure the control housing in place.
  4. Wrap the Cable: Carefully wrap the search coil cable around the stem, ensuring it is not too tight or loose, and plug the connector into the control housing.
  5. Instalirajte baterije: Open the battery compartment on the control housing and insert the required batteries (refer to specifications for battery type).
Assembled Barska Winbest Pursuit-200 Metal Detector

Slika 3.1: The main metal detector fully assembled, showing the search coil, stem, armrest, and control housing.

3.2. Preparing the Wand Detector

The Surveyor-100 Wand Metal Detector typically requires battery installation. Open the battery compartment, insert the correct batteries, and close the compartment securely.

Barska Surveyor-100 Handheld Wand Metal Detector

Slika 3.2: The handheld wand metal detector, showing its compact design and control buttons.

3.3. Preparing the Folding Shovel

Unfold the shovel and secure its locking mechanisms to ensure it is rigid for use. The shovel can be configured as a shovel or a pick. The compass is integrated into the handle.

Barska Folding Shovel in various configurations

Slika 3.3: The multi-use folding shovel, shown in both shovel and pick configurations.

4. Uputstvo za upotrebu

4.1. Main Metal Detector Operation

Barska Pursuit-200 Metal Detector LCD control panel

Slika 4.1: Close-up of the Pursuit-200 metal detector's LCD display and control panel, showing buttons for DISC, NOTCH, SENS, and volume knob.

  1. Uključeno: Turn the VOLUME knob clockwise to power on the detector.
  2. Adjust Sensitivity (SENS): Press the SENS button and use the '+' and '-' buttons to adjust the sensitivity level. Higher sensitivity increases detection depth but may also increase false signals.
  3. Discrimination (DISC): Press the DISC button and use '+' and '-' to set the discrimination level. This feature allows the detector to ignore certain types of metal (e.g., iron). The LCD will show the target ID.
  4. Notch: Use the NOTCH function to selectively eliminate specific metal categories from detection.
  5. slušalice: Plug the included headphones into the 'PHONE' jack for private listening and clearer audio signals.
  6. pometanje: Hold the detector with the search coil parallel to the ground, about 1-2 inches above the surface. Sweep the coil slowly from side to side in overlapping arcs.
  7. Indikacija cilja: When a metal object is detected, the detector will emit an audible tone, and the LCD display will show a target ID and signal strength.
  8. Vodootporna zavojnica za pretragu: The 10-inch search coil is weather-sealed and can be submerged in shallow water for detection. Ensure the control housing is not submerged.

4.2. Wand Detector Operation

Hand holding Barska Surveyor-100 Wand Metal Detector

Slika 4.2: A hand holding the Surveyor-100 wand detector, demonstrating its ergonomic design for pinpointing targets.

  1. Uključeno: Press the Power ON/OFF button to activate the wand detector.
  2. Određivanje: After locating a general area with the main detector, use the wand detector to precisely pinpoint the target's location in the soil.
  3. Indikacija: The wand detector will typically use audible alerts and/or vibration, along with LED indicators, to signal the presence of metal.

4.3. Shovel Usage

Use the folding shovel to excavate detected targets. Its compact design and pick function are useful for breaking up tough ground. The integrated compass can assist with navigation.

5. Održavanje

6. Otkrivanje problema

ProblemMogući uzrokRješenje
No power to main detector/wand detectorPrazne ili neispravno postavljene baterijeZamijenite baterije novima, pazeći na ispravan polaritet.
Erratic signals or false positivesHigh sensitivity, electromagnetic interference, mineralized groundReduce sensitivity. Move away from power lines or other electronic devices. Use discrimination settings.
Detektor ne pronalazi metalLow sensitivity, incorrect discrimination settings, search coil not parallel to groundIncrease sensitivity. Adjust discrimination settings. Ensure search coil is swept correctly.
Nema zvuka iz slušalicaHeadphones not plugged in correctly, volume too low, faulty headphonesEnsure headphones are fully plugged in. Increase volume. Test with another pair of headphones if available.

7. Specifikacije

8. Sigurnosne informacije

9. Garancija i podrška

For warranty information and customer support, please refer to the official Barska webweb-mjesto ili kontaktirajte njihovu službu za korisnike. Sačuvajte račun kao dokaz o kupovini.

Barska Official Webstranica: www.barska.com

Povezani dokumenti - Pursuit-200 (BE12748)

Preview BARSKA Ručna ručna svjetiljka s radio porukom - uputstvo za upotrebu i specifikacije
Sveobuhvatni vodič za BARSKA ručnu radio lampu (Model BC369, BK12224), u kojem se detaljno opisuju njene karakteristike, specifikacije, načini punjenja (solarno, ručna, USB), rad radija, korištenje baterijske lampe, održavanje i jednogodišnja ograničena garancija.
Preview Barska osvijetljena lupa 4x, 65mm LED - Korisnički priručnik
Uputstvo za upotrebu za Barska osvijetljeno povećalo 4x, 65 mm LED. Uključuje uputstva o umetanju baterija, radu, upotrebi i održavanju. Sadrži 5 bijelih LED dioda i 1 UV svjetlo.
Preview BARSKA Level ED spektiv - uputstvo za upotrebu i informacije o garanciji
Sveobuhvatni korisnički priručnik i detalji o ograničenoj doživotnoj garanciji za BARSKA Level ED teleskop za gledanje, koji obuhvataju identifikaciju dijelova, podešavanje, rad, održavanje i postupke garantnog servisa.
Preview BARSKA Uputstvo za upotrebu biometrijskog sefa sa tastaturom
Sveobuhvatno korisničko uputstvo za BARSKA biometrijski sef sa tastaturom, koje obuhvata podešavanje, registraciju otiska prsta i PIN-a, rad, sigurnosne funkcije, uputstva za montažu i informacije o garanciji.
Preview BARSKA Point 'n View Uputstvo za upotrebu dvogleda i digitalnog fotoaparata
Sveobuhvatni korisnički vodič za BARSKA Point 'n View Dvogled i digitalni fotoaparat (model AB10184), s detaljnim opisom njegovih karakteristika, rada, instalacije softvera i upravljanja slikama/video zapisima.
Preview BARSKA 10x25 WP BLACKHAWK Monokularni priručnik - Korisnički vodič
Zvanični korisnički priručnik za monokular BARSKA 10x25 WP BLACKHAWK (Model BC280). Naučite kako koristiti, fokusirati i održavati svoj monokular uz detaljna uputstva i sigurnosna upozorenja.