Flashforge Adventurer 5M Pro 3D printer - uputstvo za upotrebu

1. Uvod

The Flashforge Adventurer 5M Pro is an advanced 3D printer designed for efficiency and high-quality output. Featuring a Core XY structure, automatic leveling, and a dual air filtration system, it offers a streamlined printing experience for various applications. This manual provides essential information to help you get started and maximize the potential of your printer.

Figure 1: The Flashforge Adventurer 5M Pro 3D Printer.

2. Sigurnosne informacije

Please read and understand all safety instructions before operating the printer to prevent injury or damage to the device.

• Vruće površine: The print nozzle and build plate reach high temperatures during operation. Avoid touching these components directly to prevent burns. Allow the printer to cool down before performing maintenance.
• Pokretni dijelovi: Keep hands, hair, and loose clothing clear of moving parts during operation to prevent entanglement or injury.
• ventilacija: Operate the printer in a well-ventilated area. While the Adventurer 5M Pro features a dual filtration system, some materials may still produce fumes.
• Napajanje: Use only the provided power cable and ensure the printer is connected to a grounded outlet. Disconnect power before performing any maintenance or when the printer is not in use.
• Djeca i kućni ljubimci: Keep children and pets away from the printer during operation.

3. Šta se nalazi u kutiji

Upon unboxing your Flashforge Adventurer 5M Pro, verify that all components are present:

• Adventurer 5M Pro 3D Printer (installed with 0.4mm nozzle)
• 0.6mm High-Strength Nozzle (1 pc)
• 250g Burnt Titanium PLA Filament
• Držač kalema (sa 2 vijka)
• Setovi alata
• Power Cable
• USB disk
• Vodič za brzi početak
• Ljepilo
• Mast
• Alat za otključavanje
• Odvijač
• Allen Wrench
• Dijagonalna kliješta

Figure 2: Included accessories and tools.

4. Podešavanje

4.1 Početno postavljanje i priključak za napajanje

Place the printer on a stable, level surface in a well-ventilated area. Connect the power cable to the printer and a grounded electrical outlet.

4.2 Automatsko nivelisanje

The Adventurer 5M Pro features one-click automatic leveling for precise first layers. Follow the on-screen prompts on the printer's touchscreen to initiate the leveling process. This eliminates manual adjustments, ensuring optimal bed adhesion.

Figure 3: Automatic leveling and various build plate options.

4.3 Nozzle Installation and Removal

The printer comes with a 0.4mm nozzle installed and a 0.6mm high-strength nozzle included. Optional 0.25mm and 0.8mm nozzles are available. Nozzles can be quickly detached and replaced in approximately 3 seconds by pressing a release button.

Figure 4: Quick detach nozzle system.

4.4 Punjenje filamenta

Load the filament onto the spool holder at the rear of the printer. Guide the filament into the extruder according to the instructions on the touchscreen. The direct drive extruder supports various materials.

4.5 Instalacija softvera

Install the FlashPrint slicing software on your computer. The printer is also compatible with Prusa Slicer, Cura, and Orca Slicer. Refer to the Quick Start Guide for detailed software setup instructions.

5. Uputstvo za upotrebu

5.1 Početak štampanja

Prepare your 3D model using your preferred slicing software. Transfer the G-code file to the printer via USB drive, Wi-Fi, Ethernet, or cloud connection. Select the file on the printer's 4.3-inch touchscreen and initiate the print.

Figure 5: Ready to print in minutes.

5.2 Print Monitoring and Control

The Adventurer 5M Pro supports remote monitoring via its built-in camera and the 'FLASH MAKER' mobile app. You can monitor prints in real-time, adjust parameters, and receive alerts.

Figure 6: Mobile app for remote control and monitoring.

5.3 Filament Detection and Resume Printing

The printer is equipped with a filament detection sensor that pauses printing if the filament runs out or breaks. The resume printing function allows you to continue a print after a power outage or filament change, minimizing material waste.

Figure 7: Resume printing and filament detection features.

5.4 Automatsko isključivanje

The printer can be configured for automatic shutdown upon completion of a print, enhancing safety and energy efficiency.

5.5 Kompatibilnost materijala

The Adventurer 5M Pro supports a wide range of filaments, including PLA/PLA Pro, HS PLA, ABS/ABS Pro, PETG/PETG Pro, HS PETG, ASA/ASA-CF, TPU, PC, PLA-CF, and PETG-CF.

Figure 8: Supported filament types and example prints.

6. Održavanje

6.1 Nozzle Replacement

Regularly inspect the nozzle for wear or damage. Replace the nozzle as needed using the quick detach mechanism. Refer to Section 4.3 for details.

6.2 Build Plate Care

Clean the build plate after each print to ensure optimal adhesion for subsequent prints. Use isopropyl alcohol (IPA) to remove any residue. For stubborn adhesion issues, apply a thin layer of the provided glue stick.

6.3 Sistem filtracije zraka

The printer features a dual air filtration system with HEPA and activated carbon filters for both internal and external circulation. Regularly check and replace the filters to maintain effective particle and VOC removal.

Figure 9: Dual air filtration system.

6.4 Generalno čišćenje

Keep the printer clean and free of dust and debris. Use a soft, dry cloth to wipe down exterior surfaces. Avoid using abrasive cleaners or solvents.

7. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima na koje možete naići tokom rada.

• Loše prianjanje prvog sloja: Ensure the build plate is clean and free of grease. Re-run the automatic leveling process. Consider using the provided glue stick for enhanced adhesion.
• Nozzle Clogging: If the nozzle is clogged, try using the unclogging pin tool. If the clog persists, replace the nozzle. Ensure proper filament loading and storage to prevent moisture absorption.
• Print Quality Issues (e.g., ghosting, warping): Verify that the printer is on a stable surface. Ensure the chamber temperature is appropriate for the filament being used. The printer features vibration compensation to minimize ghosting.
• Filament se ne ekstrudira: Check if the filament is properly loaded and not tangled. Ensure the nozzle is not clogged and has reached the correct temperature.
• Štampač se ne povezuje: Verify Wi-Fi or Ethernet connections. Restart the printer and your network router if necessary.

8. Specifikacije

Figure 10: Flashforge Adventurer 5M Pro Technical Specifications.

9. Garancija i podrška

For warranty information, technical support, or service inquiries, please refer to the official Flashforge webweb-mjesto ili direktno kontaktirajte njihovu korisničku podršku. Sačuvajte račun kao dokaz o kupovini za reklamacije u slučaju garancije.