Minelab Xterra Pro

Uputstvo za upotrebu detektora metala Minelab X-TERRA Pro

Sveobuhvatan vodič za rukovanje i održavanje.

1. Introduction to the Minelab X-TERRA Pro

The Minelab X-TERRA Pro is an advanced treasure detector designed for both novice and experienced users. It features PRO-SWITCH (Switchable Frequency Technology), allowing operation at 5, 8, 10, or 15 kHz to adapt to various detecting environments. This detector is fully IP68 waterproof up to 5 meters (16 feet), making it suitable for land and shallow water use. Key features include multiple audio modes, a control pod flashlight, and handgrip vibration for enhanced user experience.

This manual provides detailed instructions for setting up, operating, and maintaining your X-TERRA Pro detector to ensure optimal performance and longevity.

Minelab X-TERRA Pro Instruction Manual Cover

Figure 1.1: Cover of the Minelab X-TERRA Pro Instruction Manual. This image displays the product's branding and title.

2. Sigurnosne informacije

Always observe the following safety precautions when using your Minelab X-TERRA Pro metal detector:

  • Ocjena vodootpornosti: The detector is waterproof to 5 meters (16 feet). Ensure all seals and caps are securely fastened before submerging the device. Do not exceed the specified depth.
  • Sigurnost baterije: Use only recommended batteries. Do not mix old and new batteries, or different types of batteries. Dispose of batteries according to local regulations.
  • ekološka svijest: Be aware of your surroundings. Avoid detecting in hazardous areas such as active construction sites, military zones, or areas with unexploded ordnance.
  • Digging Safety: Always use appropriate digging tools and exercise caution when excavating targets. Be mindful of underground utilities and property boundaries.
  • djeca: Držite uređaj van domašaja male djece.

3. Sadržaj paketa

Verify that all items are present in your Minelab X-TERRA Pro package:

  • X-TERRA Pro Control Unit
  • V12X™ 12" Double-D Elliptical Coil with Skidplate
  • 3-Piece Shaft System
  • USB kabl za punjenje
  • Vodič za brzi početak
  • Garantni list

Note: Specific contents may vary by region or package.

4. Postavljanje i montaža

4.1. Assembling the Detector

  1. Pričvrstite zavojnicu: Secure the search coil to the lower shaft using the provided bolt and washers. Ensure it is snug but not overtightened.
  2. Spojite dijelove osovine: Assemble the middle and upper shaft sections. The control unit attaches to the upper shaft.
  3. Montirajte kontrolnu jedinicu: Slide the control unit onto the upper shaft and secure it with the locking mechanism.
  4. Omotani kabel zavojnice: Carefully wrap the coil cable around the shaft, ensuring it is not too tight or loose, and plug it into the control unit's coil connector. Secure the connector cap.

Product image of assembled detector would be embedded here if available.

4.2. Punjenje baterije

The X-TERRA Pro features an internal rechargeable Lithium-Ion battery. Before first use, fully charge the detector.

  • Connect the supplied USB charging cable to the charging port on the control unit.
  • Plug the other end into a USB power adapter (not supplied) or a computer USB port.
  • The battery indicator on the display will show charging status. A full charge typically takes approximately 4-6 hours.

4.3. Početno uključivanje

Pritisnite i držite dugme za napajanje () for approximately 2 seconds to turn on the detector. The display will illuminate, and the detector will perform a brief self-test.

5. Operating the Minelab X-TERRA Pro

5.1. Search Modes

The X-TERRA Pro offers three primary search modes optimized for different environments:

  • Park: Ideal for high-trash areas like parks and urban environments.
  • Polje: Suitable for open fields, agricultural land, and general relic hunting.
  • Plaža: Optimized for wet sand and saltwater conditions, minimizing false signals from mineralization.

To select a search mode, press the Mode button and navigate using the arrow keys. Confirm your selection by pressing the Enter dugme.

5.2. PRO-SWITCH (Switchable Frequency Technology)

PRO-SWITCH allows you to change the operating frequency of your detector to suit different targets and ground conditions. Available frequencies are 5 kHz, 8 kHz, 10 kHz, and 15 kHz.

  • Lower Frequencies (5 kHz, 8 kHz): Generally better for deeper, larger targets and highly mineralized ground.
  • Higher Frequencies (10 kHz, 15 kHz): More sensitive to smaller, shallower targets like small coins and jewelry.

To change the frequency, press the Frekvencija button and use the arrow keys to select your desired frequency. Press Enter za potvrdu.

5.3. Podešavanje postavki

The X-TERRA Pro offers various adjustable settings to fine-tune your detecting experience:

  • Osjetljivost: Controls the detector's responsiveness to targets. Increase for deeper detection, decrease to reduce ground noise.
  • Volumen: Podešava nivo audio izlaza.
  • diskriminacija: Allows you to reject unwanted trash targets (e.g., iron).
  • Balans tla: Calibrates the detector to the ground mineralization, reducing false signals. Automatic and manual options are available.
  • Audio modovi: Select from 5 different audio modes to customize target tones.

Refer to the on-screen menu for detailed adjustments. Use the arrow keys to navigate and Enter za odabir/potvrdu.

A video demonstrating the control panel and settings adjustment would be embedded here if available.

6. Održavanje i njega

6.1. Čišćenje

  • After each use, wipe down the control unit and shaft with a damp tkanina.
  • Rinse the search coil and lower shaft with fresh water if used in saltwater or muddy conditions. Ensure the coil connector is sealed.
  • Do not use abrasive cleaners or solvents, as these can damage the detector's finish and seals.

6.2. Skladištenje

  • Detektor čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
  • Ako skladištite bateriju duži period, provjerite je li djelomično napunjena (oko 50%) kako biste produžili njen vijek trajanja.
  • Avoid placing heavy objects on the detector.

7. Otkrivanje problema

ProblemMogući uzrokRješenje
Nema strujeBattery discharged; Power button not pressed correctly.Charge the battery; Press and hold the Power button for 2 seconds.
Excessive false signalsHigh sensitivity; Improper ground balance; Electromagnetic interference.Reduce sensitivity; Perform ground balance; Move away from power lines or other electronics.
Nema odgovora ciljaCoil not connected; Discrimination too high; Sensitivity too low.Check coil connection; Lower discrimination; Increase sensitivity.
Ekran ne radiExtreme temperature; Software glitch.Allow unit to return to normal operating temperature; Perform a factory reset (refer to advanced settings).

8. Tehničke specifikacije

  • Radne frekvencije: 5 kHz, 8 kHz, 10 kHz, 15 kHz (PRO-SWITCH)
  • Načini pretraživanja: Park, Polje, Plaža
  • Ocjena vodootpornosti: IP68 (up to 5 meters / 16 feet)
  • Audio izlaz: Built-in speaker, 3.5mm headphone jack, wireless audio compatible
  • Prikaz: LCD sa pozadinskim osvetljenjem
  • baterija: Internal rechargeable Lithium-Ion
  • Težina: Approximately 1.2 kg (2.6 lbs) (depending on coil)
  • Dužina (produžena): Približno 145 cm (57 inča)
  • Length (Collapsed): Približno 63 cm (25 inča)

9. Garancija i podrška

The Minelab X-TERRA Pro comes with a standard manufacturer's warranty. Please refer to the included warranty card for specific terms, conditions, and duration applicable to your region.

For technical support, service, or warranty claims, please contact Minelab customer service or visit the official Minelab webSačuvajte dokaz o kupovini radi provjere garancije.

Minelabov službenik Webstranica: www.minelab.com

Povezani dokumenti - Xterra Pro

Preview Uputstvo za upotrebu za Minelab Sovereign XS-2a Pro: Sveobuhvatni vodič za BBS tehnologiju detekcije metala
Detaljno uputstvo za upotrebu detektora metala Minelab Sovereign XS-2a Pro, koje obuhvata BBS tehnologiju, montažu, rad, rješavanje problema i savjete za potragu za blagom.
Preview Minelab SDC 2300 Quick Start Guide: Metal Detector Operation
Concise guide to setting up and operating the Minelab SDC 2300 metal detector, covering unpacking, assembly, basic settings, and detecting techniques.
Preview Uputstvo za upotrebu detektora metala Minelab Excalibur
Sveobuhvatno uputstvo za upotrebu podvodnog detektora metala Minelab Excalibur, koje obuhvata montažu, kontrole, rad, održavanje, rješavanje problema i specifikacije. Naučite kako da koristite svoj Excalibur za efikasno traženje blaga.
Preview Uputstvo za upotrebu Minelab Goldstrikera: Vodič za traženje zlata
Sveobuhvatno uputstvo za upotrebu detektora metala Minelab Goldstriker, koje obuhvata podešavanje, rad, kontrole, savjete za istraživanje, održavanje, rješavanje problema i specifikacije za efikasno otkrivanje zlata.
Preview Minelab X-TERRA PRO Metal Detector User Manual & Guide
Comprehensive user manual and guide for the Minelab X-TERRA PRO metal detector. Learn about setup, search modes, controls, settings, and troubleshooting for optimal metal detecting performance.
Preview Minelab CTX 3030 Vodič za početak korištenja
Započnite svoju avanturu potrage za blagom s Minelab CTX 3030. Ovaj vodič pokriva sastavljanje, osnovne funkcije i karakteristike ovog naprednog detektora metala, savršenog za otkrivanje novčića, relikvija, zlata i nakita u različitim okruženjima.