Uvod
Thank you for choosing the Suptek MT5082 Tilt TV Wall Mount. This manual provides detailed instructions for safe and proper installation, operation, and maintenance of your new TV wall mount. Please read all instructions carefully before beginning installation to ensure a secure and optimal viewing iskustvo.
Važne informacije o sigurnosti
UPOZORENJE: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty. Improper installation can lead to serious injury or damage.
- Osigurajte da površina za montažu može sigurno podnijeti ukupnu težinu nosača i televizora.
- Ne prekoračujte maksimalnu nosivost od 60 kg (132 lbs).
- This mount is designed for wood studs up to 24 inches apart, or solid concrete/brick walls. Do not mount on drywall alone.
- Uvijek koristite detektor za drvene grede kako biste precizno locirali drvene grede.
- Use the provided hardware. If your TV requires different screws, consult your TV's manual or a hardware professional.
- Za montažu se preporučuju dvije osobe.
- Držite djecu i kućne ljubimce podalje tokom instalacije.
Provjere prije instalacije
Before you begin, verify the following to ensure compatibility and a successful installation:
- Veličina TV-a: Compatible with most 37-82 inch TVs.
- Težina TV-a: Your TV must weigh no more than 132 lbs (60 kg).
- VESA uzorak: Check the back of your TV for the four mounting holes. Measure the horizontal and vertical distance between these holes. The VESA pattern must be between Min: 200x100 mm and Max: 600x400 mm.
- Cable Outlets: Ensure the mount will not block any cable outlets or ports on the back of your TV.
- Vrsta zida: This mount is suitable for wood studs (up to 24" apart) or solid concrete/brick walls.
Image: Pre-installation checks including VESA compatibility (Min: 200x100 mm, Max: 600x400 mm), cable outlet considerations, TV weight (Max 132 lbs) and size (37-82"), and compatible wall types (wood studs up to 24" apart, concrete/brick wall).
Sadržaj paketa
Verify that all components are present and undamaged. If any parts are missing or damaged, contact customer support.
Image: A comprehensive layout of all components included in the MT5082 package, featuring the wall plate, TV brackets, various screws, washers, spacers, a magnetic bubble level, and an Allen key.
The package includes the wall plate assembly, TV brackets, a magnetic bubble level, various bolts (M4, M6, M8), washers, spacers, and an Allen key for adjustments.
Postavljanje i instalacija
Pažljivo slijedite ove korake za sigurnu instalaciju.
Korak 1: Sastavite zidnu ploču
Connect the two main sections of the wall plate using the provided screws. Ensure they are securely fastened.
Korak 2: Pričvrstite nosače na TV
Select the appropriate bolts, washers, and spacers for your TV's VESA pattern. Attach the TV brackets to the back of your television. Ensure the side of the bracket with the locking mechanism faces outwards. Tighten securely.
Korak 3: Pričvrstite zidnu ploču na zid
Position the assembled wall plate on your desired wall location. Use the magnetic bubble level to ensure it is perfectly horizontal. Mark the drilling points. For wood studs, drill pilot holes and secure the wall plate using the self-tapping screws. For concrete/brick walls, drill pilot holes, insert anchors, and then secure the wall plate with screws. Do not mount on drywall alone.
Image: A visual guide to the 1-2-3 easy installation process: 1. Attach brackets to TV, 2. Attach wall plate to wall, 3. Hang TV on the wall plate.
Image: Easy installation guidelines, showing successful mounting on wood studs (up to 24" apart with self-tapping screws) and concrete/brick walls (with anchors), and explicitly stating not to mount on drywall alone.
Step 4: Hang and Secure TV to Wall Plate
Carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure both brackets are properly seated. Pull down the locking cords to secure the TV in place. The cords will click when locked.
Video vodič za instalaciju
Video: Official Suptek installation guide for the MT5082 Tilt Slim TV Wall Mount, demonstrating each step of the mounting process.
Video: Odgovor kupcaview demonstrating the ease of setup for the Suptek MT5082 TV wall mount, including attaching brackets and hanging the TV.
Uputstvo za upotrebu
Podešavanje nagiba
The Suptek MT5082 allows for a tilt adjustment of 0-8 degrees forward. To adjust the tilt, loosen the tilt adjustment screws on the TV brackets using the provided Allen key, set your desired angle, and then re-tighten the screws to secure the TV in position. This feature helps reduce glare and optimize your viewing kut.
Image: A woman sitting on the floor, viewing a wall-mounted TV that is tilted forward (0-8 degrees) to prevent glare, illustrating the anti-glaring feature.
Low Profile Dizajn
This mount features a low-profile design, keeping your TV approximately 1.5 inches from the wall. This minimizes the gap between the TV and the wall, providing a sleek and tidy appearance.
Slika: Strana view of a wall-mounted television, highlighting its low profile design which positions the TV approximately 1.5 inches from the wall, contributing to a space-saving and clean aesthetic.
Quick Lock and Release
The mount includes a quick lock and release mechanism for easy removal of the TV when needed. Simply pull down the cords located at the bottom of the TV brackets to unlock and lift the TV off the wall plate.
Image: A hand pulling down a cord from beneath a wall-mounted TV, illustrating the quick lock and release function that allows for easy removal of the television from the wall plate.
Video: Official Suptek video demonstrating the display features of the MT5082 Tilt Slim TV Wall Mount, including its low profile and tilt capabilities.
Održavanje
Regular maintenance ensures the longevity and safety of your TV wall mount:
- čišćenje: Wipe the mount with a soft, dry cloth to remove dust. Avoid abrasive cleaners or solvents.
- inspekcija: Povremeno provjeravajte sve vijke i spojeve kako biste bili sigurni da su čvrsto zategnuti. Po potrebi ih ponovo zategnite.
- Weight Check: Do not place additional weight on the TV or mount beyond its specified capacity.
Rješavanje problema
Ako naiđete na bilo kakve probleme, pogledajte sljedeće uobičajene probleme i rješenja:
- TV nije ravan: Ensure the wall plate was installed level using the bubble level. Adjust the wall plate if necessary, or use the tilt adjustment feature to compensate for minor discrepancies.
- TV feels unstable: Verify that all mounting screws for both the wall plate and TV brackets are securely tightened. Ensure the wall type is appropriate and studs were properly located.
- Cannot tilt the TV: Loosen the tilt adjustment screws on the TV brackets. If they are too tight, the tilt mechanism will be locked.
- Cords are visible: The mount includes Velcro straps to manage cables and keep them tidy behind the TV.
Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | TFQF-024 |
| Kompatibilna TV veličina | 37-82 inča |
| Maksimalni kapacitet težine | 132 lbs (60 kg) |
| VESA kompatibilnost | Min: 200x100 mm, Max: 600x400 mm |
| Vrsta montaže | Zidni nosač |
| Movement Type | Tilt |
| Maksimalni kut nagiba | 8 Degrees (forward) |
| Profile od Zida | 1.5 inča |
| Materijal | legirani čelik |
| Boja | Crna |
| Težina artikla | 4.72 funte |
| Dimenzije paketa | 17.01 x 5.67 x 2.68 inča |
Informacije o garanciji
Suptek products are manufactured with quality and durability in mind. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the product packaging or contact Suptek customer support.
Korisnička podrška
If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact Suptek customer support. Our team is available to help you.
Online podrška: Visit the official Suptek webstranica za često postavljana pitanja, vodiče za rješavanje problema i opcije kontakta.
Email: Refer to your product packaging for the most current customer service email address.
