Sena 10S motociklistički Bluetooth komunikacijski sistem - uputstvo za upotrebu

1. Proizvod je gotovview

The Sena 10S Bluetooth motorcycle headset and intercom system kit is designed to facilitate seamless communication among riders. It supports full duplex, dual pairing for clear and natural conversations.

Ključne karakteristike:

• Bluetooth 4.1 and Universal Intercom for broad compatibility.
• Crystal-clear HD audio with Advanced Noise Control for superior sound quality.
• Intercom communication range of up to 1.6 km (1.0 mi) in open terrain.
• Supports up to 4 riders for group communication.
• Smartphone pairing for music, GPS navigation, and phone calls.
• Talk time of 12 hours on a single charge.

Slika 1.1: Prednja strana view of the Sena 10S Motorcycle Bluetooth Headset.

2. Sadržaj paketa

The Sena 10S Communication System package typically includes the following items:

• Sena 10S Headset Unit(s)
• Set zvučnika
• Boom mikrofon
• Žični mikrofon
• Montaža Clamp Kit
• USB kabl za napajanje i prenos podataka
• Audio kabl
• Čičak jastučići za zvučnike
• Spužve za mikrofon

Figure 2.1: All components included in the Sena 10S package.

3. Postavljanje i instalacija

3.1 Punjenje uređaja

Before initial use, fully charge the Sena 10S headset. Connect the provided USB power & data cable to the headset's charging port and a USB power source. A full charge typically takes approximately 3 hours. The LED indicator will change color to indicate charging status.

Slika 3.1: Bočna strana view of the Sena 10S unit, showing the USB charging port.

3.2 Mounting on a Helmet

The Sena 10S can be mounted on most motorcycle helmets using the included clamp kit. Follow these general steps:

1. Otpustite zavrtnje na poleđini clamp jedinica.
2. Gurnite clamp unit between the outer shell and the inner padding of your helmet, positioning it on the left side.
3. Tighten the screws to secure the clamp.
4. Attach the main headset unit to the clamp.
5. Install the speakers inside the helmet, aligning them with your ears. Use the Velcro pads if necessary.
6. Connect the microphone (boom or wired) to the headset unit and position it appropriately for clear voice pickup.

Figure 3.2: Sena 10S headset mounted on a motorcycle helmet.

4. Uputstvo za upotrebu

4.1 Uključivanje/isključivanje napajanja

• Uključeno: Press and hold the Phone Button and the Jog Dial for 1 second.
• Iskljuciti: Tap the Phone Button and the Jog Dial simultaneously.

4.2 Kontrola jačine zvuka

Okrenite Jog Dial u smjeru kazaljke na satu da biste povećali jačinu zvuka, a suprotno od smjera kazaljke na satu da biste smanjili jačinu zvuka.

4.3 Bluetooth Pairing (Smartphone)

To pair your smartphone with the Sena 10S for music, GPS, and phone calls:

1. With the headset off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately.
2. On your smartphone, enable Bluetooth and search for devices.
3. Select 'Sena 10S' from the list of found devices.
4. If prompted, enter '0000' for the PIN.

4.4 Interfonska komunikacija

The Sena 10S supports intercom communication with up to 4 riders. Ensure all devices are powered on and within range.

• Pairing with another Sena headset: Press and hold the Jog Dial of both units for 5 seconds until the LEDs flash red. Tap the Jog Dial on either unit to complete pairing.
• Starting/Ending Intercom: Tap the Jog Dial once to start or end a conversation with the first paired intercom friend. Tap twice for the second, and three times for the third.

4.5 Music Streaming and Phone Calls

• Pusti/pauziraj muziku: Pritisnite i držite Jog Dial 1 sekundu.
• Odgovori/Završi poziv: Dodirnite dugme za telefon.
• Glasovno biranje: Pritisnite i držite telefonsko dugme 3 sekundi.

5. Održavanje i njega

To ensure the longevity and optimal performance of your Sena 10S headset, follow these maintenance guidelines:

• Uređaj držite suhim. Vlaga može oštetiti unutrašnje strujne krugove.
• Nemojte koristiti jake hemikalije, rastvarače za čišćenje ili jake deterdžente za čišćenje uređaja.
• Clean the microphone and speaker grilles gently with a soft, dry cloth.
• Čuvajte uređaj na hladnom i suvom mestu kada se ne koristi.
• Redovno punite bateriju, čak i ako je ne koristite, kako biste održali njeno zdravlje.

6. Otkrivanje problema

If you encounter issues with your Sena 10S, try the following steps:

• Nema napajanja: Ensure the battery is charged. Connect to a power source and check if the charging indicator lights up.
• Nema zvuka/niska jačina zvuka: Check volume settings on both the headset and your connected device. Ensure speakers are correctly positioned.
• Interfon se ne povezuje: Verify both units are powered on and within range. Re-attempt intercom pairing.
• Bluetooth prekid veze: Ensure your paired device is within range. Try re-pairing the device.
• Resetiranje uređaja: If issues persist, perform a factory reset (refer to the full user manual for specific instructions on your model).

7. Tehničke specifikacije

8. Zvanični video proizvoda

9. Garancija i podrška

For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Sena website. For technical support, troubleshooting assistance, or further inquiries, please contact Sena customer service through their official channels.