phrozen Sonic Mega 8K S LCD/MSLA Resin 3D printer Priručnik za korisnike

1. Uvod

Dobrodošli u korisnički priručnik za vaš novi phrozen Sonic Mega 8K S LCD/MSLA Resin 3D Printer. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your printer to ensure optimal performance and longevity. Please read this manual thoroughly before operating the device.

2. Sigurnosne informacije

Vaša sigurnost je najvažnija. Molimo vas da se pridržavate sljedećih sigurnosnih smjernica:

• Always operate the printer in a well-ventilated area to avoid inhaling resin fumes.
• Wear appropriate personal protective equipment (PPE), including nitrile gloves i zaštitne naočare, when handling liquid resin or uncured prints.
• Avoid direct skin and eye contact with liquid resin. In case of contact, wash immediately with soap and water. Seek medical attention if irritation persists or if resin gets into eyes.
• Keep resin away from direct sunlight and heat sources. Store it in a cool, dark place in its original sealed container.
• Do not dispose of liquid resin down drains. Cure any waste resin under UV light before disposing of it as solid waste according to local regulations.
• Osigurajte da je štampač postavljen na stabilnu, ravnu površinu.
• Ne dirajte pokretne dijelove tokom rada.
• Isključite štampač iz električne utičnice prije bilo kakvog održavanja ili čišćenja.

3. Sadržaj paketa

Prilikom raspakivanja, molimo Vas da provjerite da li su uključene sve sljedeće stavke:

• phrozen Sonic Mega 8K S 3D Printer
• Build Plate
• Resin Vat
• Adapter za napajanje i kabl
• USB Drive (with user manual and test files)
• Gloves (as listed in "whats_in_the_box")
• Plastic Scraper
• Metalni strugač
• Lijevak
• Spare FEP Film
• Tool Kit (Allen wrenches, screws)

4. Proizvod je gotovview

The phrozen Sonic Mega 8K S is a high-resolution LCD/MSLA resin 3D printer designed for rapid production and intricate detail. It features a large 15-inch monochrome LCD screen and a spacious build volume, making it ideal for printing multiple models or large-scale projects.

Ključne karakteristike:

• Unparalleled Productivity: High-speed system and large build plate allow for efficient batch printing, such as 80 detailed 1/32 scale models in under 1.5 hours.
• Revolutionary Production Efficiency: Combined with advanced ACF film and potent TR300 Resin, achieve speeds up to ten times faster than mid-size printers.
• Streamlined Convenience with Lift-Up Lid: The ingenious lift-up lid design optimizes space utilization and provides easy access to prints.
• Efficient Resin Management: A built-in metal drip hanger helps preserve resin post-printing and ensures safety during build plate cleaning.
• Exquisite 8K Printing Precision: Achieve extraordinary levels of intricacy with 8K resolution, capturing every nuance without compromising efficiency.

Figure 4.1: Phrozen Sonic Mega 8K S 3D Printer with a large printed model.

Figure 4.2: Key features of the Phrozen Sonic Mega 8K S.

Figure 4.3: Mass production capability with the 15-inch building plate.

Figure 4.4: Comparison of specifications between Sonic Mega 8K S and Sonic Mighty 8K.

Zvanični video proizvoda:

Video 4.1: Zvanični proizvod je završenview of the phrozen Sonic Mega 8K S, showcasinnjegove karakteristike i mogućnosti.

5. Podešavanje

Follow these steps for the initial setup of your printer:

1. Raspakivanje: Carefully remove the printer and all accessories from the packaging. Inspect for any damage during transit.
2. plasman: Place the printer on a stable, level surface in a well-ventilated area, away from direct sunlight and heat.
3. Priključak za napajanje: Connect the power adapter to the printer and then to a suitable power outlet. Do not power on yet.
4. Instalirajte Build Plate: Secure the build plate onto the Z-axis arm. Ensure it is firmly attached.
5. Instalirajte posudu za smolu: Place the resin vat onto the LCD screen platform. Ensure it is seated correctly and securely.
6. Z-Axis Calibration (Leveling):
   • Otpustite vijke na ploči za izradu.
   • Place a sheet of A4 paper (or the calibration card provided) on the LCD screen.
   • Lower the build plate until it firmly presses against the paper.
   • Tighten the build plate screws while maintaining pressure.
   • Raise the build plate slightly and remove the paper.
   • Confirm the Z-axis home position through the printer's touchscreen menu.
7. Resin Loading: Once leveled, carefully pour the desired resin into the resin vat, ensuring it does not exceed the maximum fill line.

6. Uputstvo za upotrebu

To begin printing, follow these general steps:

1. Prepare 3D Model: Use a compatible slicing software (e.g., Chitubox, Lychee Slicer) to prepare your 3D model. This involves adding supports, orienting the model, and setting print parameters (layer height, exposure time, lift speed, etc.) according to your resin and desired print quality.
2. Slice Model: Slice the prepared model into layers and save it as a `.ctb` or compatible file format onto the provided USB drive.
3. Umetnite USB disk: Umetnite USB pogon u USB priključak pisača.
4. Select and Start Print: On the printer's touchscreen, navigate to the "Print" menu, select your file, and confirm to start the printing process.
5. Ispis na monitoru: Observe the first few layers to ensure proper adhesion to the build plate. The printer will automatically proceed with the print.
6. naknadna obrada: Once printing is complete, carefully remove the build plate. Use the metal scraper to detach the print from the build plate. Place the build plate on the drip hanger to allow excess resin to drip back into the vat.
7. Wash and Cure: Wash the uncured print in isopropyl alcohol (IPA) or a dedicated resin cleaner to remove excess liquid resin. After washing, cure the print under UV light (e.g., in a UV curing station) to fully harden it.

7. Održavanje

Regular maintenance ensures consistent print quality and extends the life of your printer:

• Clean Build Plate: After each print, clean the build plate with IPA and a soft cloth.
• Clean Resin Vat: If changing resin colors or if there are cured resin bits in the vat, carefully empty the resin into a separate container (filter if necessary) and clean the vat with IPA and a soft cloth. Inspect the FEP film for damage.
• Inspect FEP Film: Regularly check the FEP film at the bottom of the resin vat for scratches, dents, or cloudiness. Replace it if damaged to prevent print failures and protect the LCD screen.
• Clean LCD Screen: If resin spills onto the LCD screen, immediately clean it with a soft, lint-free cloth and IPA. Avoid using sharp objects or abrasive materials.
• Lubricate Z-Axis: Povremeno nanesite malu količinu litijumske masti na vodeći vijak Z-ose kako biste osigurali glatko kretanje.
• Ažuriranja firmvera: Check the official phrozen webstranicu za sva dostupna ažuriranja firmvera za poboljšanje performansi i dodavanje novih funkcija.

8. Otkrivanje problema

Evo nekih uobičajenih problema i njihovih potencijalnih rješenja:

9. Specifikacije

10. Garancija i podrška

For detailed warranty information and technical support, please refer to the official phrozen webstranica ili sveobuhvatni Uputstvo za upotrebu (PDF) provided with your printer. You may also contact Phrozen 3D Printer customer support for assistance.

The product is sold by Phrozen 3D Printer and is fulfilled by Amazon. It typically comes with a 30-day easy return policy.