Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your Moen Greenfield Chrome Bathroom 1/2-Inch Slip Fit Connection Diverter Tub Spout, Model 4325. Please read all instructions carefully before beginning installation to ensure proper function and to prevent damage.
The Moen Greenfield diverter tub spout is designed to complement the Greenfield bathroom collection, featuring a chrome finish and a diverter mechanism to direct water flow to a showerhead.
Sigurnosne informacije
- Uvijek isključite glavni dovod vode prije početka bilo kakvih vodoinstalaterskih radova.
- Nosite odgovarajuću ličnu zaštitnu opremu, kao što su zaštitne naočare i rukavice.
- Ako niste sigurni u vezi bilo kojeg dijela procesa instalacije, obratite se kvalificiranom vodoinstalateru.
- Osigurajte da su svi spojevi sigurni kako biste spriječili curenje.
Sadržaj paketa
Prije početka instalacije provjerite da li su sve komponente prisutne:
- Moen Greenfield Diverter Tub Spout (Model 4325)
- Upute za instalaciju (Ovaj priručnik)
- Note: Additional components for the full Greenfield collection are sold separately.
Slika 1: Moen Greenfield Chrome Diverter Tub Spout, Model 4325. This image shows the complete tub spout with its polished chrome finish and integrated diverter lift rod.
Potreban alat (nije uključen)
- Podesivi ključ ili ključ za cijevi
- Screwdriver (Phillips or flathead, depending on existing setup)
- Hex wrench (5/32" for slip fit connection, if not already present)
- Vodoinstalaterska traka (traka za zaptivanje navoja)
- Očistite krpu
Uputstva za instalaciju
This tub spout utilizes a 1/2-inch slip fit connection. Ensure your existing plumbing is compatible.
Korak 1: Pripremite prostor za instalaciju
- Isključite glavni dovod vode u vaš dom.
- Remove your existing tub spout. For slip fit spouts, locate the hex screw on the underside of the spout, loosen it with a hex wrench, and pull the spout off the copper pipe extending from the wall. For threaded spouts, unscrew the spout counter-clockwise.
- Clean the exposed copper pipe and the surrounding wall area.
Step 2: Understand Connection Types
It is important to identify the type of connection you have. The Moen Greenfield 4325 is designed for a Slip Fit (CC) vezu.
Slika 2: Comparison of IPS (threaded) and CC (slip fit) connection types. The Moen 4325 uses a CC (Slip Fit) connection, which requires a 5/32" hex wrench to secure it to the pipe.
Za a CC (Slip Fit) connection, the tub spout slides over a smooth copper pipe extending from the wall and is secured by a hex screw.
Step 3: Install the New Tub Spout
- Slide the new Moen Greenfield tub spout onto the copper pipe extending from the wall. Ensure it is pushed firmly against the wall.
- Locate the hex screw on the underside of the tub spout. Using a 5/32" hex wrench, tighten this screw to secure the spout to the pipe. Do not overtighten.
- Ensure the spout is level and flush with the wall.
Korak 4: Testirajte da li ima curenja
- Polako ponovo uključite glavni dovod vode.
- Turn on the bathtub faucet and check for any leaks around the base of the tub spout.
- If leaks are present, turn off the water supply, adjust the spout, and re-tighten the hex screw as necessary.
Uputstvo za upotrebu
The Moen Greenfield Diverter Tub Spout features a lift rod for diverting water flow.
Slika 3: Close-up view of the diverter lift rod on the Moen Greenfield Tub Spout. This rod is used to switch water flow between the tub spout and the showerhead.
- To fill the tub: Ensure the lift rod on top of the spout is in the down position. Water will flow directly from the tub spout.
- To use the showerhead: Pull the lift rod on top of the spout upwards. This will divert the water flow from the tub spout to the connected showerhead.
- To return to tub flow: Push the lift rod back down. Water will resume flowing from the tub spout.
Održavanje
Regular cleaning and maintenance will help preserve the finish and functionality of your tub spout.
- Čišćenje završne obrade: Očistite hromirani završni sloj mekom krpomamp krpu i blagi sapun. Izbjegavajte abrazivna sredstva za čišćenje, jake hemikalije ili abrazivne spužvice, jer mogu oštetiti završnu obradu.
- Mehanizam preusmjeravanja: If the diverter becomes stiff or difficult to operate, ensure no debris is obstructing the lift rod. Avoid forcing the mechanism.
Rješavanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Voda curi iz dna izljeva. | Loose slip fit connection. | Turn off water supply. Tighten the hex screw on the underside of the spout. Ensure the spout is fully seated against the wall. |
| Voda se ne preusmjerava u potpunosti prema tušu. | Diverter mechanism partially obstructed or worn. | Ensure the lift rod is fully pulled up. Check for debris around the lift rod. If the issue persists, the diverter may require replacement. |
| Low water flow from the spout or showerhead. | Main water supply partially closed or other plumbing issues. | Check that the main water supply is fully open. Consult a plumber if low flow persists across multiple fixtures. |
Specifikacije
| Brand | Moen |
| Broj modela | 4325 |
| Naziv modela | Greenfield |
| Završi | Chrome (Polished) |
| Materijal | Metal |
| Veličina veze | 1/2 inča |
| Vrsta veze | Slip Fit (CC) |
| Spout Reach | 7.38 inča |
| Težina artikla | 1.2 funti |
| Dimenzije proizvoda (D x Š x V) | 6.25" x 2.5" x 2.5" |
| Posebna karakteristika | Diverting (Lift Rod) |
| Vrsta montaže | Zidni nosač |
Garancija i podrška
Your Moen Greenfield Diverter Tub Spout is backed by Moen's Limited Lifetime Warranty. For detailed warranty information, product support, or to purchase replacement parts, please visit the official Moen webweb-mjesto ili kontaktirajte Moen korisničku službu.
Proizvođač: Moen Incorporated
Webstranica: www.moen.com
