1. Uvod
This manual provides essential information for the installation, operation, and maintenance of your WinPower H1 Halogen Headlight Bulbs. Please read these instructions carefully before use to ensure proper function and safety.
Sadržaj paketa:
- 2 x H1 Halogen Headlight Bulbs
- 1 x Uputstvo za upotrebu
- 1 x Par rukavica za montažu
2. Proizvod je gotovview i specifikacije
The WinPower H1 Halogen Headlight Bulb is designed for automotive lighting applications, providing a 4300K warm white light. These bulbs are suitable for high beam, low beam, and fog light replacement, offering enhanced visibility and a focused beam pattern.
Image: Two WinPower H1 Halogen Headlight Bulbs and their packaging.
Tehničke specifikacije:
| Model | H1 Halogen Bulb |
| Snaga | 55W |
| Voltage | 12V DC |
| Temperatura boje | 4300K (topla bijela) |
| Tip stakla | Anti-UV Quartz Glass |
| Waterproof Rating | IP68 |
| Vrsta instalacije | Plug and Play |
| Težina artikla | 1.76 unce (po sijalici) |
| Broj modela | WP-H1 |
Image: Technical specifications of the H1 Halogen Bulb.
Image: Dimensions diagram of the H1 Halogen Headlight Bulb (approx. 5.5cm/2.16in length).
3. Sigurnosne informacije
- Always ensure the vehicle's ignition is off and the engine is cool before attempting installation or maintenance.
- Wear the provided gloves during installation. Do not touch the quartz glass tube of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature bulb failure.
- Handle bulbs carefully to avoid breakage. Broken glass can cause injury.
- Držite sijalice van dohvata djece.
- Odložite stare sijalice u skladu s lokalnim propisima.
Image: Warning against touching the bulb's glass with bare hands.
4. Upute za instalaciju
The WinPower H1 Halogen Headlight Bulbs are designed for straightforward plug-and-play installation, directly replacing standard factory bulbs without modification.
- Priprema: Ensure your vehicle is turned off and parked on a level surface. Open the hood and locate the headlight assembly.
- Pristup: Depending on your vehicle model, you may need to remove a cover or access panel to reach the back of the headlight assembly. Consult your vehicle's owner's manual for specific access instructions.
- Odspojite ožičenje: Pažljivo odspojite električni konektor sa zadnje strane stare sijalice.
- Uklonite staru sijalicu: Release any clips or retaining springs holding the old bulb in place and carefully remove it from the housing.
- Instalirajte novu žarulju: Wearing the provided gloves, insert the new WinPower H1 bulb into the headlight housing. Ensure it is seated correctly and secure it with the retaining clips or springs.
- Ponovno spajanje ožičenja: Ponovo spojite električni konektor na novu sijalicu.
- Test: Turn on your vehicle's headlights to verify that the new bulbs are functioning correctly.
- Završni koraci: Reinstall any covers or access panels removed during the process.
Image: Illustration of plug-and-play installation and IP68 waterproof rating.
Slika: Detaljna views of the H1 bulb's base and filament for proper orientation during installation.
5. Operacija
Once installed, the WinPower H1 Halogen Headlight Bulbs operate like your vehicle's original bulbs. They provide a 4300K warm white light, designed to offer clear visibility for driving conditions.
Image: An H1 halogen bulb emitting warm white light.
Image: Diagram illustrating the bulb's components and its light projection for increased down-road visibility.
6. Održavanje
WinPower H1 Halogen Headlight Bulbs are constructed from heat-proof anti-UV quartz glass and feature an IP68 waterproof rating, designed for durability. Minimal maintenance is required.
- čišćenje: If the bulb's exterior becomes dirty, gently wipe it with a clean, lint-free cloth. Avoid using abrasive cleaners.
- inspekcija: Periodically check the bulbs for any signs of damage or dimming. Replace bulbs in pairs for consistent light output.
- Otpornost na vodu: The IP68 rating ensures protection against dust and water ingress, but proper sealing of the headlight assembly is crucial for overall system integrity.
Image: The H1 bulb demonstrating its IP68 waterproof capability.
7. Otkrivanje problema
If you encounter issues with your WinPower H1 Halogen Headlight Bulbs, refer to the following common problems and solutions:
- Sijalica ne pali:
- Check the electrical connection to ensure it is securely attached.
- Verify the bulb is correctly seated in the headlight housing.
- Inspect the vehicle's fuse box for a blown headlight fuse.
- Test the bulb in another working socket if available, or test the socket with a known working bulb.
- Izlaz prigušenog svjetla:
- Osigurajte da sistem punjenja vozila ispravno funkcioniše i da obezbjeđuje adekvatan napontage to the headlights.
- Check for any dirt or obstruction on the headlight lens or bulb.
- Kratak vijek trajanja:
- Confirm that the bulb's glass was not touched with bare hands during installation.
- Provjerite volumen vozilatage regulator is operating within specifications to prevent over-voltage.
- Ensure the bulb is securely mounted to minimize vibration.
8. Garancija i podrška
WinPower products are manufactured to high-quality standards. For specific warranty details or technical assistance, please refer to the product packaging or contact WinPower customer support through their official channels.
Više informacija i podrške možete pronaći posjetom WinPower Store on Amazon.
