AsperX AX260 3000A Jump Starter sa kompresorom za vazduh - uputstvo za upotrebu

1. Sigurnosne informacije

Pročitajte sva sigurnosna upozorenja, upute, ilustracije i specifikacije priložene uz ovaj proizvod. Nepoštivanje svih dolje navedenih uputstava može dovesti do strujnog udara, požara i/ili teških ozljeda.

• Uvijek nosite zaštitu za oči pri radu s baterijama.
• Ne koristite startni uređaj ako je oštećen.
• Držite startni uređaj dalje od djece.
• Ne izlažite proizvod kiši ili mokrim uslovima.
• Ensure proper polarity connection (red to positive, black to negative) to avoid sparks or damage.
• Do not use the air compressor continuously for extended periods to prevent overheating. Allow it to cool down between uses.
• Čuvajte uređaj na hladnom i suvom mestu dalje od direktne sunčeve svetlosti.

2. Sadržaj paketa

Provjerite da li se sve stavke nalaze u vašem paketu:

• 1 x AsperX AX260 Jump Starter with Air Compressor
• 1 x Smart Jumper kabel
• 1 x USB-A na USB-C kabel
• 1 x Torba za nošenje
• 1 x Cijev pumpe
• 3 x vazdušne mlaznice
• 1 x Uputstvo za upotrebu

3. Proizvod je gotovview

The AsperX AX260 is a versatile device combining a powerful jump starter, an air compressor, a power bank, and an LED flashlight. It features a 3.4-inch LCD display for easy operation and monitoring.

Ključne karakteristike uključuju:

• Vršna struja od 3000A: Capable of starting 12V vehicles with up to 10L Gas and 8.0L Diesel engines.
• Kompresor zraka od 150 PSI: Features tire pressure detection and adjustable inflation modes (PSI, BAR, KPA).
• Advanced Battery Protection System: Over 10 types of safety protections for secure operation.
• LED svjetlo od 400 lumena: Offers constant lighting, flash, and SOS modes.
• Funkcionalnost Power banke: USB-A output and USB-C input for charging electronic devices.

4. Podešavanje

Before initial use, fully charge the AsperX AX260 jump starter. Use the provided USB-A to USB-C cable to charge the device. The LCD display will indicate the charging status.

5. Uputstvo za upotrebu

5.1. Paljenje vozila pomoću kablova

The AX260 can jump start 12V vehicles with up to 10L gas or 8.0L diesel engines.

1. Insert the smart jumper cable into the 12V auto start connector port on the AX260 jump starter.
2. Spojite crveni clamp na pozitivni (+) pol akumulatora vozila i crni clamp na negativni (-) terminal.
3. Ensure the connections are secure. The LCD display on the jump starter will indicate correct operation. If the car battery voltage is below 0V, press the 'BOOST' button on the jump starter.
4. Start your car engine immediately.
5. Once the engine starts, remove the jumper cables from the vehicle battery, then from the jump starter.

5.2. Korištenje zračnog kompresora

The AX260's air compressor supports 3 optional units (PSI, BAR, KPA) and features automatic inflation stop.

1. Connect the pump tube to the air inflation opening on the AX260.
2. Attach the appropriate air nozzle to the pump tube and secure it to the item you wish to inflate (e.g., tire valve).
3. Press the 'M' button to select the desired inflation mode (car, motorcycle, bicycle, ball).
4. Koristite dugmad '+' i '-' da biste podesili ciljni pritisak.
5. Long press the 'OK' button to start inflation. The device will automatically stop once the set pressure is reached.

5.3. Funkcionalnost power banke

The AX260 can charge various electronic devices via its USB ports.

• Connect your device's charging cable to the USB-A output port on the AX260.
• Uređaj će automatski početi s punjenjem.

5.4. LED svjetiljka

The 400-lumen LED light offers multiple modes for different situations.

• Pritisnite lamp switch button to cycle through the modes: constant lighting, flash, and SOS.
• Držite lamp switch button to turn off the light.

6. Održavanje

• Recharge the jump starter every 3-6 months, even if not in use, to maintain battery health.
• Uređaj čistite suhom, mekom krpom. Ne koristite jake hemikalije ili abrazivne materijale.
• Čuvati na hladnom i suvom mestu. Izbjegavajte ekstremne temperature.

7. Otkrivanje problema

• Uređaj se ne uključuje: Ensure the device is charged. If fully charged and still not turning on, contact customer support.
• Vozilo ne pali: Check that the jumper cables are correctly connected to the battery terminals. Ensure the jump starter has sufficient charge. If the battery is deeply discharged (below 0V), use the 'BOOST' function.
• Kompresor zraka se ne napuhava: Verify the pump tube and air nozzle are securely attached. Check that the desired pressure is set and the 'OK' button is long-pressed to start. Ensure the device has sufficient charge.
• Air compressor overheating: If the air compressor becomes hot during use, allow it to cool down for several minutes before resuming operation. Continuous use for very long periods can cause overheating.
• Incorrect tire pressure reading: Ensure the air nozzle is properly sealed to the tire valve.

8. Specifikacije

9. Zvanični videozapisi proizvoda

The following videos provide additional information and demonstrations of the AsperX AX260 Jump Starter with Air Compressor:

10. Garancija i podrška

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official AsperX website. Sačuvajte račun o kupovini za reklamacije.