1. Uvod
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Xprinter XP-233B Thermal Barcode Printer. The XP-233B is designed for efficient thermal printing of barcodes and labels, utilizing heat-sensitive paper without the need for ink or ribbons.
2. Sigurnosna uputstva
- Provjerite je li štampač priključen na izvor napajanja s odgovarajućim naponomtage kao što je navedeno na adapteru za napajanje.
- Ne izlažite štampač vodi ili prekomjernoj vlazi.
- Izbjegavajte postavljanje štampača na direktnu sunčevu svjetlost ili u blizinu izvora toplote.
- Keep the printer away from dust and debris to prevent damage to internal components.
- Ne pokušavajte sami rastavljati ili popravljati štampač. Za pomoć se obratite kvalifikovanom servisnom osoblju.
- Use only recommended thermal label rolls to ensure optimal print quality and printer longevity.
3. Sadržaj paketa
Provjerite da li su sve stavke prisutne u paketu:
- Xprinter XP-233B Thermal Barcode Printer
- Adapter za napajanje
- USB kabel
- Vodič za brzi početak (ako je uključen)
- Driver CD (if included, drivers can also be downloaded online)
4. Proizvod je gotovview
Familiarize yourself with the main components of the XP-233B printer.
Slika 4.1: Prednja strana view of the Xprinter XP-233B, showing the power switch, control panel, and label output slot.
Slika 4.2: Pozadi view of the Xprinter XP-233B, highlighting the USB, Ethernet, and power input ports.
Funkcije kontrolne table:
- Dugme FEED: Press to feed a blank label. Hold to perform a self-test print.
- Dugme PAUSE: Pauzira ili nastavlja štampanje.
- Dugme CANCEL: Cancels the current print job.
- LED indikatori: Display printer status (e.g., Power, Error, Paper Out). Refer to troubleshooting for specific light patterns.
5. Podešavanje
5.1 Povezivanje štampača
- Connect the power adapter to the printer's power input port and then plug it into a wall outlet.
- Connect the USB cable from the printer to your computer. For Ethernet connectivity, connect an Ethernet cable from the printer to your network router or switch.
- Uključite štampač pomoću prekidača za napajanje koji se nalazi sa strane.
5.2 Učitavanje etiketa
Slika 5.1: Odozgo view of the Xprinter XP-233B with the cover open, illustrating the label loading area.
- Press the 'OPEN' button on the side of the printer to open the top cover.
- Place the thermal label roll into the label compartment, ensuring the labels feed from the bottom of the roll and the printable side faces upwards.
- Adjust the movable label guides to fit the width of your label roll snugly, without pinching the labels.
- Pull a few labels past the print head and out through the front slot.
- Čvrsto zatvorite gornji poklopac dok ne klikne na svoje mjesto.
- Štampač će automatski kalibrirati i uvući nekoliko etiketa kako bi detektovao razmak između etiketa.
5.3 Instalacija drajvera
Install the printer drivers on your computer. Drivers can typically be found on the included CD or downloaded from the official Xprinter webstranica. Slijedite upute na ekranu za instalaciju.
6. Upravljanje štampačem
6.1 Osnovno štampanje
Once the printer is set up and drivers are installed, you can print labels from your application (e.g., label design software, shipping software). Ensure the correct printer model (Xprinter XP-233B) is selected in your application's print settings.
6.2 Samoprovjera ispisa
To perform a self-test print:
- Ensure the printer is powered on and labels are loaded.
- Pritisnite i držite FEED button for approximately 3-5 seconds until the printer starts printing.
- The self-test print will display printer information and a test pattern, confirming basic functionality.
7. Održavanje
7.1 Čišćenje glave za štampanje
Regular cleaning of the print head ensures optimal print quality and extends the printer's lifespan. Clean the print head when print quality degrades or after every few rolls of labels.
- Isključite štampač i iskopčajte kabl za napajanje.
- Otvorite gornji poklopac.
- Gently wipe the print head surface with a cotton swab lightly dampened with isopropyl alcohol (70% or higher).
- Allow the print head to dry completely (approximately 2-3 minutes) before closing the cover and turning on the printer.
7.2 Čišćenje eksterijera
Obrišite vanjski dio štampača mekom,amp tkanina. Nemojte koristiti jake hemikalije ili abrazivna sredstva za čišćenje.
8. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Štampač se ne uključuje | Power cord loose; power outlet faulty; power adapter damaged. | Check power connections; try a different outlet; replace power adapter if necessary. |
| Nema ubacivanja etiketa | Labels incorrectly loaded; paper out; label guides too tight. | Reload labels correctly; replace label roll; adjust label guides. |
| Poor print quality (faded, lines) | Print head dirty; low-quality labels; print head damaged. | Clean print head (refer to Section 7.1); use recommended thermal labels; contact support if print head is damaged. |
| Printer not responding to print commands | Incorrect driver installed; USB/Ethernet cable loose; printer paused. | Reinstall drivers; check cable connections; press PAUSE dugme za nastavak. |
| Labels skipping or misaligning | Incorrect label sensor calibration; label guides not set correctly. | Perform a self-test print to recalibrate; adjust label guides. |
9. Specifikacije
| Feature | Specifikacija |
|---|---|
| Naziv modela | Xprinter - Thermal barcode printer |
| Broj modela stavke | XP-233B |
| Tehnologija štampača | Thermal |
| Tehnologija povezivanja | Ethernet, USB |
| Izlaz štampača | Monochrome |
| Print Media | Etikete |
| Maximum Sheet Capacity | 100 (typical for roll capacity, actual sheet capacity depends on label size) |
| Dimenzije proizvoda (D x Š x V) | 26.8 x 18 x 17.2 cm |
| Težina artikla | 1.2 kg |
| Boja | Crna |
10. Informacije o garanciji
Xprinter products typically come with a limited manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Xprinter website for specific warranty terms and conditions, including coverage duration and service procedures. Keep your purchase receipt as proof of purchase for warranty claims.
11. Korisnička podrška
For technical assistance, driver downloads, or further inquiries regarding your Xprinter XP-233B, please visit the official Xprinter support website or contact their customer service department. Contact information can usually be found on the Xprinter webweb-mjestu ili u dokumentaciji koja je dostavljena uz vaš pisač.
