KOORUI KR20Y Single Monitor Desk Mount User Manual

Uvod

Thank you for choosing the KOORUI KR20Y Single Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor arm. Designed for 17-32 inch flat and curved screens, this mount offers VESA 75x75mm and 100x100mm compatibility and supports monitors weighing between 2-9 kg (4.4-19.8 lbs). Please read this manual thoroughly before assembly and retain it for future reference.

Sigurnosne informacije

Molimo vas da se pridržavate sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede ili štetu:

• Nemojte prekoračiti maksimalnu nosivost od 9 kg (19.8 lbs).
• Ensure the mounting surface (desk) is strong enough to support the combined weight of the mount and your monitor.
• Follow all assembly instructions carefully. If you have any doubts, consult a qualified professional.
• Držite djecu i kućne ljubimce podalje tokom instalacije.
• Check all connections and fasteners regularly to ensure they remain secure.
• Avoid pinching cables during adjustment to prevent damage.

Sadržaj paketa

Molimo Vas da provjerite da li su sve komponente prisutne prije početka instalacije:

• Sklop kraka za monitor
• C-Clamp Montažni hardver
• Pribor za montažu ušica
• VESA tanjir
• Vijci za montažu monitora (različite veličine)
• Hex Keys / Adjustment Tools
• Obujmice za upravljanje kablovima
• Korisnički priručnik (ovaj dokument)

Image: All components of the KOORUI KR20Y Monitor Arm, including the arm, C-clamp, and grommet mount options.

Specifikacije

Image: Visual representation of the monitor arm's universal compatibility, showing supported screen sizes (17-32 inch), load capacity (2-9kg), and VESA standards (75x75mm, 100x100mm).

Postavljanje i instalacija

The KOORUI KR20Y monitor arm offers two installation options: C-Clamp Mount and Grommet Mount. Choose the method best suited for your desk.

Image: Diagram illustrating the two available installation methods: C-Clamp Mount and Grommet Mount.

1. C-Clamp Mount

This method is suitable for desks with a thickness between 20-80mm (0.78-3.14 inches).

1. Pričvrstite C-clamp bazu do ruba vašeg stola.
2. Zategnite clamp screw until the base is securely fastened to the desk. Ensure it is stable and does not wobble.
3. Insert the main pole of the monitor arm into the C-clamp baza.
4. Secure the pole with the provided screw or knob.

2. Grommet Mount

This method requires a pre-drilled hole in your desk with a diameter of 10-50mm (0.39-1.96 inches) and is suitable for desks with a thickness between 20-90mm (0.78-3.54 inches).

1. Rastavite C-clamp components from the base if they are pre-attached.
2. Umetnite vijak s ušnicom kroz prethodno izbušenu rupu na vašem stolu.
3. Secure the grommet base from underneath the desk using the provided washer and nut. Tighten firmly.
4. Insert the main pole of the monitor arm into the grommet base.
5. Secure the pole with the provided screw or knob.

3. Pričvršćivanje monitora

1. Attach the VESA plate to the back of your monitor using the appropriate screws. Ensure the screws are not overtightened.
2. Slide the monitor (with the attached VESA plate) onto the arm's VESA head.
3. Secure the monitor to the arm using the locking mechanism (if present) or by tightening the designated screws.

4. Upravljanje kablovima

Provucite kablove monitora kroz integrirane kanale za upravljanje kablovima na nosaču kako biste održali uredan radni prostor.

Image: The monitor arm with cables neatly routed through its integrated cable management system, contributing to a clean desk setup.

Uputstvo za upotrebu

The KOORUI KR20Y monitor arm features a gas spring system for smooth and effortless adjustments. Adjustments can be made to achieve an ergonomic viewing iskustvo.

Image: Detailed diagram showing the full range of motion of the monitor arm, including tilt, swivel, rotation, and maximum extension/height.

1. Podešavanje visine

Gently push or pull the monitor up or down to adjust its height. The gas spring will hold the monitor in your desired position. If the arm is too stiff or too loose, adjust the gas spring tension (see Održavanje odjeljak).

2. Podešavanje nagiba

Grasp the top and bottom edges of your monitor and tilt it forward or backward to achieve an optimal viewing angle. The tilt range is +85° to -30°.

3. Podešavanje okretanja

Rotate the monitor left or right at the VESA plate connection point. The swivel range is ±90°.

4. Rotation (Portrait/Landscape)

Rotate the monitor 360° to switch between landscape and portrait orientations as needed.

Slika: Rendgenski snimak view highlighting the premium gas spring mechanism within the monitor arm, indicating its durability and smooth adjustment capabilities.

Održavanje

• Gas Spring Tension Adjustment: If the monitor arm does not hold its position or is difficult to move, use the provided hex key to adjust the gas spring tension. Turn clockwise to increase tension (for heavier monitors) and counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the arm moves smoothly and holds the monitor securely.
• čišćenje: Obrišite krak monitora mekom,amp krpom. Izbjegavajte abrazivna sredstva za čišćenje ili rastvarače.
• Periodični pregled: Redovno provjeravajte sve vijke i spojeve kako biste bili sigurni da su čvrsto zategnuti i sigurni.

Rješavanje problema

Garancija i podrška

For warranty information or technical support, please refer to the warranty card included with your product or visit the official KOORUI website. If you encounter any issues not covered in this manual, please contact KOORUI customer service for assistance.