1. Uvod
This manual provides comprehensive instructions for the installation, operation, and maintenance of the PROFLO PF9312FVPK Dual Flush Valve Assembly. This product is designed for use with PROFLO PF9300 series dual flush tanks, offering an efficient solution for toilet flushing.
2. Sigurnosne informacije
Molimo vas da pažljivo pročitate sva uputstva prije instalacije i upotrebe. Nepoštivanje ovih uputstava može dovesti do materijalne štete ili tjelesnih povreda.
- Always turn off the water supply to the toilet before beginning any installation or maintenance.
- Nosite odgovarajuću ličnu zaštitnu opremu, kao što su rukavice i zaštita za oči.
- Ako niste sigurni u vezi bilo kojeg dijela procesa instalacije, obratite se kvalificiranom vodoinstalateru.
- Držite male dijelove podalje od djece.
3. Sadržaj paketa
Prije početka instalacije provjerite da li su sve komponente prisutne:
- PROFLO PF9312FVPK Dual Flush Valve Assembly
- Trip Lever
- All necessary hardware for installation
Image 1: The PROFLO PF9312FVPK Dual Flush Valve Assembly with its included trip lever and connecting hose.
4. Postavljanje i instalacija
This dual flush valve assembly is designed for PROFLO PF9300 series dual flush tanks. Ensure your toilet tank is compatible before proceeding.
- Isključite dovod vode: Locate the water supply valve behind the toilet and turn it clockwise until the water flow stops completely. Flush the toilet to empty the tank.
- Remove Old Flush Valve (if applicable): Disconnect the water supply line from the fill valve. Remove the old flush valve by unscrewing the mounting nut from underneath the tank. Clean the tank opening thoroughly.
- Install New Flush Valve: Place the new PROFLO PF9312FVPK Dual Flush Valve Assembly into the tank opening from the inside. Ensure the rubber gasket is properly seated. From underneath the tank, thread the mounting nut onto the flush valve and tighten it securely by hand. Do not overtighten.
- Connect Trip Lever: Attach the included trip lever to the designated connection point on the flush valve. Ensure the chain or cable from the trip lever is connected to the flush valve mechanism, allowing for proper activation of the dual flush feature. Adjust the chain/cable length to ensure both flush options operate correctly without excessive slack or tension.
- Reconnect Water Supply: Reconnect the water supply line to the fill valve. Turn the water supply valve counter-clockwise to restore water flow to the toilet.
- Provjerite ima li curenja: Allow the tank to fill. Inspect all connections for any signs of leaks. If leaks are present, turn off the water supply and re-tighten connections as needed.
5. Uputstvo za upotrebu
The PROFLO PF9312FVPK Dual Flush Valve Assembly provides two flushing options to conserve water:
- Djelomično ispiranje: For liquid waste, gently press and release the trip lever. This activates a reduced water volume flush.
- Potpuno ispiranje: For solid waste, press and hold the trip lever down for a few seconds. This activates a full water volume flush.
Familiarize yourself with the feel of each flush option to optimize water usage.
6. Održavanje
Regular maintenance ensures optimal performance and longevity of your dual flush valve.
- čišćenje: Periodically inspect the flush valve for mineral buildup or debris. Turn off the water supply, drain the tank, and gently clean components with a soft brush and mild, non-abrasive cleaner. Avoid harsh chemicals that can damage rubber seals.
- Inspekcija pečata: Check the rubber seals and gaskets for wear, cracks, or deterioration. Worn seals can lead to leaks and inefficient flushing. Replace any damaged seals promptly.
- Podešavanje poluge: Ensure the trip lever operates smoothly and the chain/cable has the correct tension for both flush options. Adjust if necessary.
7. Otkrivanje problema
Za uobičajene probleme i njihova rješenja pogledajte sljedeću tabelu:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Toalet neprestano teče | Flapper/seal not seating properly; fill valve issue; trip lever chain too tight. | Inspect flush valve seal for debris or wear. Adjust trip lever chain to ensure proper slack. Check fill valve for proper shut-off. |
| Slabo ispiranje | Insufficient water level; partial blockage; flush valve not opening fully. | Adjust fill valve to increase water level. Check for obstructions in the bowl jets. Ensure trip lever chain allows full opening of the flush valve. |
| WC školjka se ne pušta vodu | Trip lever disconnected; flush valve mechanism jammed. | Reconnect trip lever chain/cable. Inspect flush valve for any obstructions preventing movement. |
| Leaks from tank base | Labava matica za montažu; oštećena zaptivka. | Turn off water, drain tank, and tighten mounting nut. If leak persists, replace the flush valve gasket. |
If the problem persists after attempting these solutions, contact PROFLO customer support or a qualified plumber.
8. Specifikacije
- Model: PF9312FVPK
- Kompatibilnost: PROFLO PF9300 series dual flush tanks
- Težina artikla: 15.4 unce
- Dimenzije proizvoda: 1 x 1 x 1 inches (Note: These dimensions may refer to packaging or a general placeholder. Actual product dimensions for installation may vary.)
- Proizvođač: PROFLO
9. Garancija i podrška
For warranty information or technical support, please refer to the official PROFLO webweb-mjesto ili kontaktirajte njihovu službu za korisnike. Sačuvajte račun kao dokaz o kupovini.
PROFLO Customer Support: Posjetite PROFLO trgovinu na Amazonu
