Veise KS02B i KS01C Brava za ulazna vrata bez ključa s ručkom Uputstvo za upotrebu

Uvod

Welcome and thank you for choosing the Veise Keyless Entry Door Lock. This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of your new lock. Please read this manual thoroughly before installation and retain it for future reference to ensure proper function and longevity of your product.

Komponente proizvoda

Prije početka instalacije provjerite jesu li sve komponente prisutne i neoštećene. Ako bilo koji dijelovi nedostaju ili su oštećeni, obratite se korisničkoj podršci.

• Keypad Deadbolt (KS02B or KS01C)
• Set rukohvata
• Fizički tasteri (2)
• Mounting Hardware (screws, strike plate, latch)
• Predložak za instalaciju
• Uputstvo za upotrebu

This image displays the complete set of components for the Veise Keyless Entry Door Lock, including the keypad deadbolt, a lever handle set, and a traditional knob set. The KS02B model features a fingerprint sensor, while the KS01C is keypad-only. Both are shown in a matte black finish.

Specifikacije proizvoda

• Brand: Veise
• modeli: KS02B (with fingerprint), KS01C (keypad only)
• Vrsta brave: Keypad Deadbolt with Handle
• Materijal: Metal
• završiti: Mat crna
• Posebne karakteristike: Keyless entry (Fingerprint, Passwords, One-time Codes, Keys), Auto-Lock, Anti-Peeping Codes, Backlit Keypad, Low Battery Alerts, Mute Mode, Vacation Mode
• Sigurnosni certifikat: ANSI Grade 3 Certified
• Otpornost na vremenske uvjete: IP54 otporan na vremenske uslove
• Raspon temperature: -31°F do 158°F (-35°C do 70°C)
• Izvor napajanja: 4 AA batteries (estimated 1+ year battery life)
• Kompatibilnost vrata: American standard left and right-handed doors, door thickness 1-3/8" to 2" (35mm-50mm), hole diameter 2-1/8" (54mm), backset 2-3/8" or 2-3/4" (60mm or 70mm)
• Fingerprint Recognition (KS02B): 0.3 seconds identification, 99.99% recognition rate, 500 DPI resolution
• Korisnički kodovi: Do 20 korisničkih kodova

Vodič za instalaciju

Potreban alat: Phillips odvijač.

Prije nego počnete:

• Ensure your door dimensions match the lock's compatibility requirements. Refer to the "Check The Door Size Before Purchase" image below.
• Do not install batteries until the lock is fully installed and tested.

This diagram illustrates how to measure your door to ensure compatibility with the Veise Keyless Entry Door Lock. It specifies the required hole diameter (2-1/8 inches or 54mm), backset (2-3/8 inches or 60mm, or 2-3/4 inches or 70mm), and door thickness (1-3/8 inches to 2 inches or 35mm-50mm). It also shows compatibility with both left-handed and right-handed doors and clarifies that the lock is for single cylinder deadbolts, not mortise or integrated systems.

Koraci instalacije:

1. Pripremite vrata: If replacing an existing lock, remove it. Use the provided template to mark and drill holes if installing on a new door.
2. Instalirajte bravu: Insert the latch into the door edge, ensuring the "UP" arrow is facing upwards. Secure with screws.
3. Ugradite vanjski sklop: Route the cable through the door hole and position the exterior keypad assembly.
4. Ugradite unutrašnju montažnu ploču: Secure the interior mounting plate to the exterior assembly using screws.
5. Povežite kabl: Spojite kabel od vanjskog sklopa na unutarnji sklop.
6. Instalirajte unutrašnji sklop: Attach the interior assembly to the mounting plate, ensuring the thumb turn operates smoothly. Secure with screws.
7. Ugradite zaštitnu ploču: Ugradite zapornu ploču na okvir vrata.
8. Instalirajte baterije: Insert 4 AA batteries into the interior assembly.
9. Probni rad: Test the lock with the physical key and the default code (if any) before closing the door.

This image shows the Veise KS02B keyless entry door lock and its accompanying lever handle fully installed on a white door. The matte black finish of the lock and handle contrasts with the door, highlighting the sleek design and integrated appearance.

A hand is shown using a Phillips head screwdriver to secure the interior assembly of the Veise keyless door lock to the door. This illustrates the ease of installation, requiring only a basic tool.

Podešavanje i programiranje

Početno podešavanje:

• After battery installation, the lock will perform a self-check.
• The default master code is typically provided in a separate quick start guide or on a sticker inside the battery cover. It is highly recommended to change this immediately for security.

Promjena glavnog koda

Consult the quick start guide for detailed, model-specific steps on changing the default master code. This is a critical security step.

Dodavanje korisničkih kodova

The lock supports up to 20 unique user codes. To add a new user code, typically you will: Enter Master Code, press '#', select the option for adding a user code, enter the new 4-8 digit code, then press '#'. Refer to your quick start guide for exact button sequences.

Adding Fingerprints (KS02B Model Only)

To add a fingerprint: Enter Master Code, press '#', select the option for adding a fingerprint, then place your finger on the sensor multiple times from different angles until it is successfully registered. Refer to your quick start guide for exact button sequences.

This image highlights the versatile unlocking options for the Veise keyless door lock. It shows that users can unlock the door using up to 20 programmable user codes, a temporary one-time code, or the two included physical spare keys. This provides multiple layers of access control.

Upravljanje bravom

Otključavanje vrata

Korištenje korisničkog koda:

1. Pritisnite bilo koju tipku da biste aktivirali tastaturu.
2. Unesite svoj korisnički kod od 4-8 cifara.
3. Press the "#" key. The lock will unlock.

Using Fingerprint (KS02B Only):

1. Postavite registrovani prst na senzor otiska prsta.
2. The lock will identify your fingerprint within 0.3 seconds and unlock.

Using Physical Key:

1. Insert the physical key into the keyhole.
2. Turn the key to unlock the deadbolt.

Zaključavanje vrata

Ručno zaključavanje:

• From the inside, turn the thumb turn to the locked position.
• From the outside, press the "#" key on the keypad.

Funkcija automatskog zaključavanja:

The lock can be programmed to automatically lock after a set period (typically 10-99 seconds) after being unlocked. Refer to programming instructions in your quick start guide to enable/disable and adjust this setting.

This image depicts a woman entering her home, with a close-up inset showing the Veise keyless door lock's auto-lock mechanism. The text indicates that the lock can automatically engage after a user-defined period of 10-99 seconds, enhancing security by ensuring the door is always locked after entry or exit.

Anti-Peeping Passcode

To prevent others from guessing your code, you can enter random digits before or after your actual passcode. This makes it harder for onlookers to discern your true code.

Example: [Random Digits] + [Your Code] + [Random Digits]

This image visually explains the anti-peeping passcode feature. It shows a keypad lock and a sequence of numbers: random digits, followed by the actual password (highlighted), and then more random digits. This method helps obscure the real password from onlookers.

Mute Mode

This mode silences the keypad beeps for quiet operation. Refer to your quick start guide for programming instructions to enable or disable this feature.

Odmor

This mode disables all user codes and fingerprints, allowing access only via the master code or physical key. It is ideal for extended absences to enhance security. Refer to your quick start guide for programming instructions to enable or disable this feature.

Održavanje

Zamjena baterije

The lock is powered by 4 AA batteries. When the battery level is low, the lock will provide an audible and/or visual alert. Replace batteries promptly to avoid loss of function.

1. Uklonite poklopac baterije na unutrašnjem sklopu.
2. Uklonite stare baterije.
3. Umetnite 4 nove AA alkalne baterije, pazeći na ispravan polaritet (+/-).
4. Vratite poklopac baterije.

Napomena: Do not mix old and new batteries, or different types of batteries, as this can damage the lock or reduce battery life.

Čišćenje

Očistite vanjski dio brave mekom krpomamp cloth. Avoid abrasive cleaners, solvents, or chemical sprays, as they may damage the finish or electronic components.

For the fingerprint sensor (KS02B), gently wipe with a clean, dry, lint-free cloth to ensure optimal performance.

Rješavanje problema

Garancija i korisnička podrška

For warranty information or technical assistance, please refer to the warranty card included with your product or contact Veise customer support directly.

Please have your model number (KS02B or KS01C) and purchase date ready when contacting support for faster service.