1. Uvod
Thank you for choosing the BYGD S5000 Smart Battery Charger and Maintainer. This device is designed to charge and maintain 6-volt and 12-volt lead-acid batteries (flooded, gel, AGM, SLA, VRLA, maintenance-free) and 12-volt lithium-ion (LiFePO4) batteries. It features advanced charging modes, automatic repair functions, and multiple safety protections to ensure optimal battery performance and longevity.
Image 1.1: The BYGD S5000 Smart Battery Charger with its attached alligator clips. This image shows the compact design and the display panel of the charger.
2. Sigurnosne informacije
Molimo vas da pročitate i razumjete sve sigurnosne informacije prije upotrebe ovog proizvoda. Nepoštivanje ovih uputa može dovesti do strujnog udara, požara ili ozbiljnih povreda.
- Uvijek nosite zaštitu za oči i zaštitnu odjeću pri radu s baterijama.
- Osigurajte da je prostor za punjenje dobro prozračen.
- Čuvati van domašaja djece.
- Do not expose the charger to rain or excessive moisture. The device is IP65 waterproof, meaning it is protected against low-pressure water jets, but it should not be immersed in water.
- Nikada nemojte puniti smrznutu ili oštećenu bateriju.
- Connect the output clips to the battery terminals correctly: positive (+) to positive, negative (-) to negative. Avoid reverse connections.
- Disconnect the AC power before making or breaking the battery connections.
Image 2.1: The BYGD S5000 charger shown with water droplets, illustrating its IP65 waterproof rating. Note: Do not immerse in water.
3. Značajke proizvoda
- Svestrana kompatibilnost: Charges 6V and 12V lead-acid (flooded, gel, AGM, SLA, VRLA) and 12V lithium-ion (LiFePO4) batteries.
- Automatski rad: Fully automatic charging with zero overcharge risk.
- Force Mode: Manually initiate charging for deeply discharged batteries (down to zero volts).
- Integrated Digital Thermal Sensor: Adjusts charging based on ambient temperature to prevent over-charging in hot climates and under-charging in cold climates.
- Advanced Memory Function: Remembers the last used charging mode and automatically resumes it upon restart.
- Način popravke baterije: Utilizes slow pulse reconditioner technology to address sulfation and acid stratification, restoring battery performance and extending life.
- Višestruka zaštita: Includes over-current, over-charge, over-temperature, short-circuit, over-voltage, nisko-voltage i zaštitu od obrnutog povezivanja.
- Kompaktan i izdržljiv dizajn: Lightweight and robust construction for easy portability and long-lasting performance. Features a built-in hook for convenient hanging.
Slika 3.1: Prekoview of the BYGD S5000's key features, highlighting its capabilities such as battery charging, repair, life extension, and various protections.
Image 3.2: Visual representation of the multi-protection features integrated into the BYGD S5000 charger, ensuring safe operation.
4. Sadržaj paketa
The BYGD S5000 package includes:
- BYGD S5000 Smart Battery Charger
- Baterija Clamps (krokod štipaljke)
- AC strujni kabl
- Uputstvo za upotrebu
Image 4.1: An illustration of all items included in the BYGD S5000 product package, including the charger unit, battery clamps, and the instruction manual.
5. Podešavanje i povezivanje
- Pripremite bateriju: Provjerite da li su terminali akumulatora čisti i bez korozije. Ako je potrebno, očistite ih žičanom četkom i rastvorom sode bikarbone.
- Povežite se s baterijom:
- Povežite RED pozitivan (+) clamp na pozitivni (+) terminal baterije.
- Povežite BLACK negativni (-) clamp na negativni (-) terminal baterije.
- For vehicles, if connecting to the chassis, connect the negative clamp to a non-painted, heavy gauge metal part of the chassis away from the battery and fuel line.
- Priključite na naizmjeničnu struju: Plug the charger's AC power cord into a suitable electrical outlet (115 Volts). The charger will power on and enter standby mode.
Slika 5.1: Detaljan view of the charger's connection components, including the AC power plug and the battery clamp konektori.
6. Uputstvo za upotrebu
6.1. Selecting a Charging Mode
After connecting the charger to the battery and AC power, press the MODE button to cycle through the available charging modes. The charger will display the selected mode.
Image 6.1: An illustration of the various charging modes available on the BYGD S5000, along with their intended battery types and functions.
- 6V način rada: For 6V lead-acid batteries (wet, gel, enhanced flooded, maintenance-free, calcium).
- 12V način rada: For 12V lead-acid batteries (wet, gel, enhanced flooded, maintenance-free, calcium).
- 12V AGM SLA Mode: Specifically for 12V AGM and SLA lead-acid batteries.
- 12V litijumski način rada: For 12V Li-ion batteries with BMS, including LiFePO4. Use with care.
- 12V način popravke: Extends the life of old, idle, slightly damaged batteries by removing sulfation and repairing them with pulse repair technology.
- 12V Supply Mode: Converts to DC power to supply any 12VDC device with a maximum supply current of 2A. Use in excess of 2A is strictly prohibited.
6.2. Charging Process (5 Step 4 Stage Smart Charging)
The BYGD S5000 employs a sophisticated 5-step, 4-stage charging process to optimize battery health and charge efficiency:
- Step 1: Pre-charge - Initial assessment and gentle charging for deeply discharged batteries.
- Step 2: Charge Detection and Diagnosis - Analyzes battery condition and determines optimal charging parameters.
- Step 3: Constant Current Charging - Charges the battery at a steady current until it reaches a certain voltage nivo.
- Korak 4: Constant Voltage Punjenje - Charges the battery at a steady voltage, allowing the current to decrease as the battery approaches full charge.
- Step 5: Trickle Maintenance Charging - Maintains the battery at full charge, preventing self-discharge and sulfation.
Image 6.2: A visual breakdown of the 5-step, 4-stage smart charging process implemented by the BYGD S5000 charger.
6.3. Funkcija memorije
The charger features an advanced memory function. It will remember the last selected charging mode and automatically resume charging in that mode when reconnected or powered on, saving time and effort.
6.4. Temperaturna kompenzacija
The integrated digital thermal sensor detects ambient temperature and adjusts the charging voltage accordingly. This prevents over-charging in hot conditions (e.g., 45°C / 113°F) and under-charging in cold conditions (e.g., -20°C / -4°F), ensuring optimal and safe charging performance.
Image 6.3: Illustration of the charger's temperature compensation feature, which adjusts charging parameters for both cold and hot environments.
7. Battery Capacity & Charging Time Reference
The following table provides a reference for battery capacity and approximate charging times. Actual times may vary based on battery condition, discharge level, and ambient temperature.
Image 7.1: A reference chart detailing estimated charging times for various battery capacities and a list of compatible battery types.
| Vrsta baterije | 2-10Ah | 10-20Ah | 20-40Ah | 40-80Ah | 80-120Ah |
|---|---|---|---|---|---|
| Vrijeme punjenja | 0.5-3h | 3-6h | 6-12h | 12-18h | 18-30h |
Kompatibilne vrste baterija: LIPO (with BMS), AGM, WET CELL, GEL CELL, etc. Suitable for CARS, MOTORCYCLES, LAWNMOWERS, OFF-ROADERS, etc.
8. Otkrivanje problema
The charger's display provides indicators for various conditions. Refer to the display for diagnostic information.
- Red Warning Light On: Indicates a potential issue such as a bad battery, reversed connections, or voltage preko 15V.
- Battery Charge Status Indicators: Four bars indicate 25%, 50%, 75%, and 100% charge levels.
- Indicator Light On (Standby): Charger is connected to AC power and ready for mode selection.
If the charger is not operating as expected, check the following:
- Ensure all connections are secure and correct (positive to positive, negative to negative).
- Verify the AC power outlet is functional.
- Confirm the correct charging mode is selected for your battery type.
- If the battery is severely discharged (below 2V), use the "Force Mode" if available and appropriate for your battery type.
- If the "Repair Mode" is selected, allow sufficient time for the reconditioning process.
Image 8.1: The charger's display panel, indicating warning signs (e.g., bad battery, reversed connections, over 15V), battery charge level, and the mode selection interface.
9. Specifikacije
| Feature | Specifikacija |
|---|---|
| Broj modela | S5000 |
| Ulazni voltage | 115 V AC |
| Output Voltage | 6 Volts / 12 Volts DC |
| Charging Current | 5 Amps |
| Dimenzije proizvoda | 140.5 mm x 89 mm x 61 mm |
| Težina artikla | 1.85 funte |
| IP Rating | IP65 (Protected against low-pressure water jets; not for immersion) |
| Kompatibilne vrste baterija | Lead-acid (Flooded, Gel, AGM, SLA, VRLA), Lithium-ion (LiFePO4) |
| Maksimalni kapacitet baterije | Do 120 Ah |
Image 9.1: Dimensional drawing of the BYGD S5000 charger, showing its compact size.
10. Garancija i podrška
For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official BYGD webSačuvajte dokaz o kupovini za eventualne reklamacije.
