1. Uvod
This document provides instructions for the HumanCentric Power Supply Holder Add-On (Model 101-2110-PSH). This product is designed as an optional accessory for the HumanCentric Dual VESA Sleeve (Part Number 101-2110). Its primary function is to securely hold the power supply for compatible Dell OptiPlex Micro Form Factor (MFF) computers, enhancing cable management and workspace organization.
2. Kompatibilnost
The Power Supply Holder (Model 101-2110-PSH) is an add-on product and requires the HumanCentric Dual VESA Sleeve (Part Number 101-2110) for installation. It is not a stand-alone product.
Compatible Dell OptiPlex MFF Models:
- 3000 Series: 3000, 3040, 3046, 3050, 3060, 3070, 3080
- 5000 Series: 5000, 5050, 5060, 5070, 5090
- 7000 Series: 7000, 7040, 7050, 7060, 7070, 7080, 7090
Note: This product does not fit Dell OptiPlex tower, small form factor, or Wyse models.
3. Postavljanje i instalacija
The Power Supply Holder is designed to integrate with the HumanCentric Dual VESA Sleeve (Part Number 101-2110). Ensure the main VESA sleeve is already installed according to its instructions before proceeding.
Koraci instalacije:
- Prepare the Main Mount: Ensure your HumanCentric Dual VESA Sleeve (101-2110) is securely mounted to your desired surface (VESA, wall, or under-desk).
- Attach the Power Supply Holder: The power supply holder is designed to slide onto or attach to the existing 101-2110 sleeve. Align the mounting points of the power supply holder with the corresponding slots on the VESA sleeve.
- Secure the Power Supply: Place your Dell OptiPlex MFF power supply into the holder. The metal enclosure box will secure it underneath the computer mount.
- Upravljanje kablovima: Route the power supply cables neatly to improve desk cable management and maintain a professional installation.
Vizualni vodiči:
Video snimci instalacije:
4. Uputstvo za upotrebu
Once installed, the Power Supply Holder securely contains your Dell OptiPlex MFF power supply, keeping it out of sight and off your desk. This contributes to a cleaner, more organized workspace by managing cables effectively. No specific operational steps are required beyond initial installation and cable routing.
5. Održavanje
To maintain the product, wipe it with a soft, dry cloth. Avoid using abrasive cleaners or harsh chemicals, as these may damage the finish.
6. Otkrivanje problema
Issue: Power Supply Holder does not fit.
Rješenje: Verify that your computer is a Dell OptiPlex Micro Form Factor (MFF) model listed in the compatibility section. This holder is specifically designed for the power supplies of these MFF models and will not fit OptiPlex tower, small form factor, or Wyse models.
Issue: Power Supply Holder cannot be attached.
Rješenje: Ensure you have the HumanCentric Dual VESA Sleeve (Part Number 101-2110) correctly installed. This power supply holder is an add-on and requires the main sleeve for attachment.
7. Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | 101-2110-PSH |
| Brand | HumanCentric |
| Težina artikla | 1.01 funte |
| Dimenzije paketa | 9.13 x 6.22 x 3.74 inča |
| Materijal | Metal |
| Boja | Srebro |
| Vrsta montaže | Add-on to HumanCentric Part 101-2110 (which supports Wall Mount, VESA, Under-Desk) |
| Movement Type | Popravljeno |
8. Garancija
This HumanCentric product is covered by a Ograničena doživotna garancija. Please refer to the warranty information included with your original HumanCentric Dual VESA Sleeve (Part Number 101-2110) or visit the HumanCentric webstranica za sve detalje.
9. Korisnička podrška
For technical assistance, installation questions, or any other inquiries regarding your HumanCentric Power Supply Holder Add-On, please contact HumanCentric customer support. You can find contact information on the official HumanCentric webweb-mjestu ili putem dokumentacije o kupovini.
Webstranica: Visit the HumanCentric Store on Amazon
