TecTake višenamjenski čelični ormarić Model 404392-3 Korisnički priručnik

1. Uvod

Thank you for choosing the TecTake Multi-purpose Steel Cabinet. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new cabinet. Please read these instructions carefully before use and retain them for future reference.

This cabinet is designed to offer versatile storage solutions for various environments, including offices, workshops, and homes. It features robust steel construction, lockable compartments, and adjustable shelves to meet diverse storage needs.

2. Sigurnosne informacije

UPOZORENJE:

• Pay attention to the maximum load capacity of 40 kg per compartment. Exceeding this limit can cause damage to the cabinet or lead to injury.
• Install the cabinet securely according to the assembly instructions to prevent tipping.
• Avoid loading items beyond the permitted weight.
• Uvjerite se da je ormarić postavljen na stabilnu, ravnu površinu.
• Keep all assembly components out of reach of children.

3. Sadržaj paketa

Before beginning assembly, please verify that all parts are present and undamaged. If any parts are missing or damaged, contact customer service immediately.

• Steel Cabinet components
• 3 x Podesive police
• 8 x Keys (for 4 locks)
• Mounting Material (screws, bolts, etc.)
• Upute za montažu (ovaj priručnik)

4. Upute za sastavljanje

Assembly is designed to be straightforward. It is recommended to have a second person assist with certain steps for ease and safety. Ensure you have adequate space and the necessary tools (e.g., screwdriver, wrench) before starting.

4.1. Priprema

• Raspakujte sve komponente i položite ih na čistu, meku površinu kako biste spriječili ogrebotine.
• Identificirajte sve dijelove u odnosu na popis sadržaja pakiranja.
• Prikupite potreban alat.

4.2. Sastavljanje korak po korak

1. Sastavite okvir: Connect the side panels to the back panel and base using the provided screws and fasteners. Ensure all connections are secure.
2. Ugradnja ladica: Mount the drawer slides to the cabinet frame. Assemble the drawers and insert them into the slides.
3. Pričvrstite vrata: Secure the hinges to the cabinet frame and then attach the doors. Adjust hinges as needed for proper alignment and smooth operation.
4. Insert Locks: Install the cylinder locks into the designated slots on the doors and drawers. Test each lock with its corresponding key.
5. Place Shelves: Insert the shelf support clips into the desired height slots inside the cabinet compartments. Place the adjustable shelves onto the clips.
6. Konačan plasman: Position the assembled cabinet on a level surface. For added stability, consider anchoring the cabinet to a wall using appropriate hardware (not always included, but good practice for tall furniture).

5. Operacija

5.1. Otvaranje i zatvaranje vrata

• Insert the correct key into the lock and turn to unlock.
• Pull the door handle to open. The reinforced swing doors open smoothly up to an angle of approximately 130°.
• To close, push the door firmly until it engages. Turn the key to lock. Rubber buffers ensure quiet closing.

5.2. Using Drawers

• Insert the correct key into the drawer lock and turn to unlock.
• Pull the drawer handle to open. The drawers operate on smooth slides.
• To close, push the drawer completely shut. Turn the key to lock.

5.3. Podešavanje polica

• Ispraznite policu koju želite podesiti.
• Carefully lift the shelf and remove the support clips from their current slots.
• Reinsert the support clips into the desired new height slots. Ensure all four clips are at the same height and securely seated.
• Place the shelf back onto the clips.

6. Održavanje

The TecTake Steel Cabinet is designed for durability and easy maintenance.

• čišćenje: Obrišite površine mekom, damp cloth. For stubborn dirt, a mild detergent can be used. Avoid abrasive cleaners or solvents, as these can damage the powder-coated finish. The smooth, reversible shelves facilitate easy cleaning.
• inspekcija: Povremeno provjeravajte sve vijke i pričvršćivače kako biste bili sigurni da su čvrsto zategnuti. Zategnite ako je potrebno.
• podmazivanje: If door hinges or drawer slides become stiff, apply a small amount of silicone-based lubricant.
• Upravljanje ključevima: Keep spare keys in a safe, accessible location separate from the cabinet.

7. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti sa svojim ormarićem.

8. Specifikacije

Detailed technical specifications for the TecTake Multi-purpose Steel Cabinet.