Uvod
This manual provides essential information for the safe and efficient operation of your APC Smart-UPS SMT3000C 3000VA Uninterruptible Power Supply. Please read this manual thoroughly before installation and use.
Važna sigurnosna uputstva
Please read and follow all safety instructions carefully to prevent injury or damage to the unit. Retain this manual for future reference.
- električna sigurnost: Connect the UPS to a grounded outlet only. Do not remove the grounding prong.
- Sigurnost baterije: Batteries can present a risk of electrical shock and high short-circuit current. Observe proper polarity when connecting batteries.
- Instalacija: Install the UPS indoors in a controlled environment, free from excessive dust, corrosive fumes, and conductive contaminants.
- servisiranje: Refer all servicing to qualified service personnel. There are no user-serviceable parts inside the UPS.
Sadržaj paketa
Verify that all items listed below are included in your package. If any items are missing or damaged, contact your dealer or APC.
- APC Smart-UPS SMT3000C Unit
- PowerChute Business Edition Software CD
- RS-232 kabel
- USB kabel
- Ethernet kabl
- Wire Ties
- Komplet za čišćenje
Slika 1: APC Smart-UPS SMT3000C unit shown with all included accessories: RS-232 cable, USB cable, Ethernet cable, wire ties, and a cleaning kit.
Product Overview
The APC Smart-UPS SMT3000C is a Line Interactive Uninterruptible Power Supply designed to provide reliable power protection for your electronic equipment. It features Automatic Voltage Regulation (AVR) and SmartConnect for remote monitoring.
Prednja ploča
Slika 2: Front view of the APC Smart-UPS SMT3000C, displaying the control panel and LCD screen for status monitoring.
Zadnja ploča
The rear panel provides all necessary connections for input power, protected outlets, and communication ports.
Slika 3: Pozadi view of the APC Smart-UPS SMT3000C, highlighting the NEMA 5-30P input, (8) NEMA 5-15R outputs, (2) NEMA 5-20R outputs, communication ports (RS-232, USB, Ethernet), and a circuit breaker.
- Ulazna snaga: NEMA 5-30P
- Izlazni priključci: (8) NEMA 5-15R, (2) NEMA 5-20R
- Komunikacijski portovi: RS-232, USB, Ethernet (for SmartConnect)
- Prekidač: Zaštita od preopterećenja
Setup
1. Plasman
Place the UPS on a flat, stable surface in a cool, dry, and well-ventilated area. Ensure adequate clearance around the unit for proper airflow. Avoid direct sunlight, heat sources, and excessive moisture.
2. Povezivanje baterije
The UPS is shipped with the internal battery disconnected for safety. Follow these steps to connect the battery:
- Remove the front bezel of the UPS.
- Locate the battery connector.
- Firmly push the battery connector together until it clicks into place.
- Zamijenite prednju masku.
3. Povezivanje opreme
Connect your critical equipment (computers, servers, network devices) to the UPS output outlets. Ensure that the total load does not exceed the UPS capacity (2700W).
- Utičnice sa rezervnim napajanjem baterijama i zaštitom od prenapona: Ove utičnice obezbjeđuju napajanje iz baterija tokom vanjske upotrebe.tages and surge protection. Connect critical equipment here.
4. Priključivanje na električnu mrežu
Plug the UPS power cord (NEMA 5-30P) into a dedicated, grounded 120V wall outlet. Avoid using extension cords or surge strips with the UPS input.
5. Početno uključivanje
Press the power button on the front panel to turn on the UPS. The LCD display will illuminate, and the UPS will perform a self-test. Allow the UPS to charge for at least 24 hours before relying on it for extended battery backup.
6. SmartConnect Setup
The APC SmartConnect feature allows for remote monitoring of your UPS. Connect an Ethernet cable from the UPS SmartConnect port to your network. Follow the instructions provided with the SmartConnect service to register your device and enable remote monitoring, automatic notifications, and firmware updates.
Upravljanje UPS-om
Uključivanje/isključivanje
- Za uključivanje: Press and hold the power button on the front panel until the display illuminates.
- Za isključivanje: Pritisnite i držite dugme za napajanje dok se ekran ne isključi.
Automatic Voltage Regulacija (AVR)
UPS ima funkciju automatskog pojačavanja zvuka.tage Regulacija (AVR), koja automatski ispravlja manje promjene jačine zvukatage fluctuations (sags and surges) without using battery power. This helps to preserve battery life and ensures a stable power supply to connected equipment.
Runtime Information
The APC Smart-UPS SMT3000C provides varying runtimes depending on the connected load:
- 50W Load: Otprilike 563 minuta
- 100W Load: Otprilike 330 minuta
- 200W Load: Otprilike 172 minuta
- 300W Load: Otprilike 112 minuta
- 400W Load: Otprilike 81 minuta
- 500W Load: Otprilike 63 minuta
- 600W Load: Otprilike 51 minuta
- 700W Load: Otprilike 42.2 minuta
- 800W Load: Otprilike 35.7 minuta
- 900W Load: Otprilike 30.6 minuta
- 1000W Load: Otprilike 26.7 minuta
- 1350W (Half Load): Otprilike 17.5 minuta
- 1400W Load: Otprilike 16.6 minuta
- 1600W Load: Otprilike 13.5 minuta
- 1800W Load: Otprilike 11.2 minuta
- 2000W Load: Otprilike 9.4 minuta
- 2500W Load: Otprilike 6.1 minuta
- 2700W (Full Load): Otprilike 5.7 minuta
PowerChute Business Edition Software
Install the PowerChute Business Edition software on your connected computer to enable safe system shutdown during extended power outages, monitor UPS status, and configure various settings. Connect the UPS to your computer using the provided USB or RS-232 cable.
Održavanje
Battery Care
The UPS batteries are designed for a specific lifespan. Factors such as ambient temperature, number of discharge cycles, and discharge depth affect battery life. Replace batteries when the UPS indicates a battery fault or when runtime significantly decreases.
- Perform regular self-tests (via the UPS display or PowerChute software) to assess battery health.
- Avoid operating the UPS in environments with high temperatures, as this can shorten battery life.
Čišćenje
Regularly clean the exterior of the UPS with a soft, dry cloth. Use the provided cleaning kit for gentle cleaning. Ensure the UPS is powered off and disconnected from utility power before cleaning. Do not use liquid or aerosol cleaners directly on the unit.
Rješavanje problema
This section provides solutions to common issues you may encounter with your UPS. For more complex problems, contact APC technical support.
- UPS se ne uključuje: Ensure the battery is properly connected and the UPS is plugged into a live wall outlet. Check the input circuit breaker.
- UPS beeps continuously: This usually indicates an overload condition or a low battery. Reduce the connected load or allow the battery to charge.
- Connected equipment loses power during an outage: The UPS may be overloaded, or the battery may be depleted or faulty. Verify the load and battery status.
- SmartConnect not connecting: Ensure the Ethernet cable is securely connected and your network settings allow communication. Check the SmartConnect portal for device registration status.
Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | SMT3000C |
| Kapacitet | 3000VA/2700W |
| Ulazni voltage | 120 Volts |
| Input Connection | NEMA 5-30P |
| Izlazne veze | (8) NEMA 5-15R, (2) NEMA 5-20R |
| Vrsta baterije | Olovna kiselina |
| Dimenzije proizvoda | 6 x 6 x 6 inča |
| Težina artikla | 124.9 funte |
| Boja | Crna |
| Certifikat Energy Star | Da |
Garancija i podrška
APC provides a standard warranty for this product. For detailed warranty information, please refer to the warranty card included with your product or visit the official APC webZa tehničku podršku, registraciju proizvoda ili upite o uslugama, obratite se korisničkoj podršci APC-a putem njihovih službenih kanala.
The APC SmartConnect feature is free during the standard warranty period of the UPS, providing advanced support services and remote monitoring.
