YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch with 10G SFP User Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch with 10G SFP. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Sadržaj paketa

Provjerite da li vaš paket sadrži sljedeće stavke:

• 1 x YuanLey 8 Port 2.5G Ethernet Switch
• 1 x kabel napajanja
• 1 x Uputstvo za upotrebu

3. Značajke proizvoda

• 9 Port Configuration: Includes 8 x 2.5 Gigabit Ethernet ports and 1 x 10G SFP+ Port.
• Performanse velike brzine: Delivers 2.5 times faster network performance than traditional Gigabit switches, with a switching capacity of up to 60Gbps.
• Plug and Play: Unmanaged design requires no configuration for immediate use.
• Durable and Quiet: Features a metal case with 6KV lightning protection and a fanless design for silent operation.
• Široka radna temperatura: Pouzdano funkcioniše na temperaturama u rasponu od -10°C do 50°C.
• Svestrani plasman: Supports both wall mount and desktop placement.

4. Proizvod je gotovview

Figure 4.1: YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch

Slika 4.2: Prednja ploča iznadview with Ports and Indicators

The switch features 8 RJ45 ports supporting 10/100/1000Mbps/2.5G adaptive speeds and 1 SFP+ port for 1G/2.5G/10G fiber connections. LED indicators provide status for power and link activity.

Slika 4.3: Zadnja ploča iznadview sa ulaznom snagom

Slika 4.4: Detaljno View of Ports and Indicators

The rear panel includes the DC 12V/1.0A power input port and a grounding screw for electrical safety. The front panel LEDs indicate power status, 2.5Gbps link speed (orange), and 100/1000Mbps link speed (green) for RJ45 ports, and link status for the SFP+ port.

5. Podešavanje

Follow these steps to set up your YuanLey Ethernet Switch:

1. Priključite napajanje: Plug the provided power adapter into the DC 12V/1.0A input port on the rear of the switch, then plug the adapter into a power outlet. The PWR LED on the front panel will illuminate green.
2. Povežite Ethernet uređaje: Connect your network devices (e.g., computers, NAS, WiFi 6 APs, gaming PCs) to the 2.5G Base-T ports (1-8) using standard Ethernet cables (Cat5e or higher recommended for 2.5G speeds). The corresponding port LEDs will light up to indicate a successful connection and speed.
3. Connect SFP+ Module (Optional): If using the 10G SFP+ port, insert a compatible 1G/2.5G/10G SFP/SFP+ module (not included) into the SFP+ slot. Then, connect a fiber optic cable or DAC cable to the module. The SFP indicator LED will light up when a link is established.

Figure 5.1: Typical Network Setup with the YuanLey Switch

6. Upravljanje prekidačem

The YuanLey 2.5G Unmanaged Ethernet Switch is designed for simple plug-and-play operation. Once powered on and connected to your network devices, it will automatically detect the link speed and establish connections without any further configuration.

• LED indikatori: Observe the PWR, L1-L8, and SFP+ Link LEDs to monitor the switch's status and network activity.
• Automatski MDI/MDIX: The switch supports Auto MDI/MDIX, eliminating the need for crossover cables.
• Adaptive Speed: RJ45 ports automatically adapt to 10/100/1000Mbps or 2.5Gbps.

7. Održavanje

To ensure optimal performance and longevity of your switch, consider the following maintenance guidelines:

• plasman: Place the switch in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture. The fanless design relies on natural convection for cooling.
• čišćenje: Periodically clean the exterior of the switch with a soft, dry cloth. Avoid using liquid or aerosol cleaners.
• Upravljanje kablovima: Osigurajte da su mrežni kablovi uredno posloženi i da nisu previše savijeni ili napregnuti.
• Napajanje: Use only the original power adapter provided with the switch.

Figure 7.1: Fanless Design and Environmental Considerations

8. Otkrivanje problema

Ako naiđete na probleme sa svojim prekidačem, pogledajte sljedeće uobičajene probleme i rješenja:

• Nema napajanja:
  • Provjerite je li adapter za napajanje sigurno spojen na prekidač i ispravnu utičnicu.
  • Check if the PWR LED is illuminated. If not, try a different power outlet.
• Nema veze/aktivnosti na portu:
  • Provjerite je li Ethernet kabel sigurno spojen i na port prekidača i na mrežni uređaj.
  • Pokušajte s drugim Ethernet kabelom.
  • Provjerite da li je povezani uređaj uključen i da ispravno funkcioniše.
  • Check the LED indicator for the specific port. If it's off, there might be no link.
• Mala brzina mreže:
  • Ensure all devices in the network path (NICs, cables, routers) support 2.5G speeds to achieve maximum performance.
  • Use Cat5e or higher-rated Ethernet cables for 2.5G connections.
  • Check the color of the port LED: Orange indicates 2.5Gbps, Green indicates 100/1000Mbps.
• SFP+ Port Issues:
  • Ensure the SFP/SFP+ module is correctly inserted and compatible with the switch.
  • Verify the fiber optic or DAC cable is properly connected and undamaged.
  • Check the SFP indicator LED for link status.

9. Specifikacije

Slika 9.1: Dimenzije proizvoda

10. Garancija i podrška

YuanLey products are designed for reliability and performance. For warranty information and technical support, please refer to the official YuanLey webweb-mjesto ili direktno kontaktirajte njihovu korisničku službu. Sačuvajte račun za kupovinu u slučaju reklamacije.

Za dodatnu pomoć, možete posjetiti YuanLey Store on Amazon.