1. Uvod
The Sans HEPA 13 Air Purifier is designed to provide cleaner, healthier air in your home or workplace. It features advanced filtration technology to effectively remove airborne particles and improve indoor air quality.
Ključne karakteristike:
- Opsežna pokrivenost: Purifies air in spaces up to 1560 sq. ft. every hour.
- Napredni sistem filtriranja: Equipped with a pre-filter, medical-grade HEPA 13 filter, activated carbon filter, and a powerful internal UV-C light.
- Sveobuhvatna zaštita: Removes over 99.9% of particles down to 0.1 microns, including pollutants, allergens, dust, dander, harmful chemicals, gases, odors, and smoke.
- tihi rad: Designed for ultra-quiet performance, especially in sleep mode.
- Smart Auto-Mode: Utilizes precise sensors to measure air quality and automatically adjusts fan settings for optimal purification and energy efficiency.
- Prikaz kvalitete zraka: Features an easy-to-read display showing the Air Quality Index (AQI) in real-time.
2. Podešavanje
- Raspakujte pročišćivač: Pažljivo izvadite pročišćivač zraka iz ambalaže. Provjerite jesu li uklonjeni svi materijali za pakovanje.
- Pozicioniranje: Place the air purifier on a flat, stable surface in the desired room. For optimal performance, ensure there is adequate space around the air intake and outlet vents.
- Instalacija filtera: The filter is typically pre-installed but may require removal of protective packaging. Refer to the 'Maintenance' section for detailed filter access instructions. Ensure the filter is correctly seated before closing the cover.
- Priključak za napajanje: Uključite kabl za napajanje u standardnu električnu utičnicu.
3. Uputstvo za upotrebu
The Sans HEPA 13 Air Purifier features an intuitive control panel located on the top of the unit.
- Uključivanje/isključivanje: Pritisnite ON/OFF dugme za uključivanje ili isključivanje jedinice.
- Odabir načina rada: Pritisnite MODE button to cycle through different operating modes: Auto, Low, Medium, High.
- Automatski način rada: In Auto-Mode, the purifier uses precise sensors to detect real-time air quality and automatically adjusts the fan speed to maintain optimal air purification.
- Funkcija tajmera: Koristite TIMER button to set the operating duration (e.g., 2, 4, or 8 hours). The unit will automatically shut off after the set time.
- Kontrola svjetla: The LIGHT button controls the ambient light feature. Press to turn the light on or off.
- Režim spavanja: When activated, Sleep Mode operates the purifier at its lowest, quietest setting and turns off all display lights to ensure an undisturbed sleeping environment.
- Indikator kvalitete zraka (AQI): The digital display shows the current Air Quality Index (AQI) in your space. A lower number indicates cleaner air. The color of the top light ring may also change to reflect air quality (e.g., blue for good, red for poor).
- UV-C svjetlo: The internal UV-C light provides an additional layer of air purification. It can be toggled on or off via the control panel.
Zvanični video proizvoda:
4. Održavanje
Regular maintenance ensures the longevity and optimal performance of your Sans HEPA 13 Air Purifier.
Zamjena filtera:
The air purifier is equipped with a filter replacement indicator that will illuminate when it's time to change the filter. It is generally recommended to replace the filter every 3 months, depending on usage and air quality.
- Iskljuciti: Uvijek isključite i iskopčajte pročišćivač zraka iz struje prije bilo kakvog održavanja.
- Pristup odjeljku filtera: Locate the filter access panel, typically on the back or bottom of the unit. Open the panel by pressing the release tab or rotating the base as indicated in the diagram.
- Uklonite stari filter: Carefully pull out the used filter by its tabs. Dispose of the old filter responsibly.
- Instalirajte novi filter: Remove the new filter from its protective packaging. Insert the new filter into the compartment, ensuring it is seated correctly.
- Zatvori panel: Čvrsto zatvorite pristupnu ploču filtera.
- Resetiraj indikator filtera: After replacing the filter, press and hold the filter reset button (often combined with another function button) for a few seconds until the indicator light turns off.
Čišćenje eksterijera:
Obrišite vanjski dio pročišćivača zraka mekom, suhom krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
5. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Jedinica se ne uključuje | Nema napajanja; kabel za napajanje nije pravilno spojen. | Provjerite je li kabel za napajanje sigurno uključen u ispravnu utičnicu. Provjerite prekidač za napajanje. |
| Slabe performanse prečišćavanja vazduha | Clogged filter; incorrect mode setting. | Replace the filter if the indicator is on. Select a higher fan speed or Auto-Mode. |
| Neobična buka | Prepreka u ventilatoru; uređaj nije na stabilnoj površini. | Turn off and unplug the unit. Check for any foreign objects. Place on a stable surface. |
| Air Quality Index (AQI) remains high | High level of pollutants; unit not running long enough. | Allow the unit to run longer, especially in Auto-Mode. Ensure proper room size coverage. |
6. Specifikacije
- Broj modela: Sans Purificatore d'aria HEPA 13
- Dimenzije proizvoda: 10"D x 11.5"Š x 20"H
- Težina artikla: 14 funti
- Izvor napajanja: Corded Electric
- Boja: Ponoć
- Vrsta filtera: Pre-Filter, Medical Grade HEPA 13, Activated Carbon, UV-C Light
- Područje pokrivenosti: Up to 1560 sq. ft. per hour
7. Garancija i podrška
For warranty information and customer support, please refer to the product packaging or contact Sans customer service directly. Keep your purchase receipt for warranty claims.
