Cecotec Conga Rockstar Wet & Dry Steel Pro 30L Vacuum Cleaner Instruction Manual

1. Važna sigurnosna uputstva

Please read all instructions carefully before using this appliance and retain them for future reference. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• električna sigurnost: Osigurajte napajanje voltage matches the rating label on the appliance. Do not use with a damaged cord or plug. Unplug the appliance before cleaning or performing any maintenance.
• Sigurnost tečnosti: Do not vacuum flammable or combustible liquids (e.g., gasoline) or use in areas where they may be present. Do not immerse the appliance in water.
• Opća upotreba: Ovaj uređaj nije namijenjen za upotrebu od strane osoba (uključujući djecu) sa smanjenim fizičkim, senzornim ili mentalnim sposobnostima, ili nedostatkom iskustva i znanja, osim ako im je dat nadzor ili upute o korištenju uređaja od strane osobe odgovorne za njihovu sigurnost . Djeca trebaju biti pod nadzorom kako bi se osiguralo da se ne igraju s uređajem.
• Održavanje: Only use manufacturer-recommended attachments. Do not operate without filters in place.

2. Proizvod je gotovview

The Cecotec Conga Rockstar Wet & Dry Steel Pro is a powerful 1600W vacuum cleaner designed for both solid and liquid debris. It features a robust 30-liter metal tank, a dual filtration system, and a convenient blowing function.

Slika 2.1: The Cecotec Conga Rockstar Wet & Dry Steel Pro 30L vacuum cleaner with its various attachments, including floor brush, crevice tool, and upholstery brush.

Ključne karakteristike:

• Velika snaga: 1600W motor for strong suction.
• Svestrano čišćenje: Effectively vacuums both solid debris and liquids.
• Veliki kapacitet: 30-liter stainless steel tank.
• Dvostruki sistem filtracije: Filters water and purifies air, capturing allergens.
• Funkcija puhanja: Converts to a blower for clearing debris.
• Prošireni doseg: Over 5 meters operating radius.
• Uključeni dodaci: Comes with 4 specialized accessories for various cleaning tasks.

3. Postavljanje i montaža

Slijedite ove korake da biste sastavili usisivač prije prve upotrebe:

1. Raspakujte komponente: Carefully remove all parts from the packaging. Verify all components are present: main unit, flexible hose, extension tubes, floor brush, crevice tool, upholstery brush, and filters.
2. Pričvrstite točkove: Insert the caster wheels into the designated slots on the base of the vacuum cleaner until they click into place.
3. Instalirajte filtere: Depending on whether you will be vacuuming dry or wet materials, ensure the correct filter is installed. For dry vacuuming, the HEPA filter should be in place. For wet vacuuming, remove the HEPA filter and ensure the foam filter (if included) is correctly positioned. Refer to the maintenance section for filter details.


Slika 3.1: Illustration of the filter removal/installation process. The top motor unit is lifted off the tank, revealing the filter assembly.

4. Spojite crijevo: Insert the flexible hose into the suction inlet on the main unit. Ensure it is securely fastened.
5. Attach Extension Tubes and Nozzle: Connect the extension tubes to the flexible hose, then attach the desired cleaning nozzle (e.g., floor brush) to the end of the extension tubes.

4. Uputstvo za upotrebu

Your Cecotec Conga Rockstar Wet & Dry Steel Pro offers versatile cleaning modes.

4.1. Suho usisavanje

For dry vacuuming, ensure the HEPA filter is correctly installed. Connect the appropriate dry cleaning accessory (e.g., floor brush for large areas, crevice tool for tight spaces).

1. Uključite kabl za napajanje u odgovarajuću električnu utičnicu.
2. Uključite usisivač pomoću prekidača za napajanje.
3. Move the nozzle over the area to be cleaned.
4. When finished, turn off the vacuum cleaner and unplug it.

Slika 4.1: A user demonstrating dry vacuuming of outdoor patio with the floor brush attachment.

4.2. Mokro usisavanje

For wet vacuuming, remove the HEPA filter and ensure the foam filter (if applicable) is in place. Use the wet cleaning accessory (often the same floor brush with a squeegee function, or a dedicated wet nozzle).

1. Uključite kabl za napajanje u odgovarajuću električnu utičnicu.
2. Uključite usisivač.
3. Move the nozzle slowly over the liquid spill. The vacuum will collect the liquid into the tank.
4. Do not overfill the tank. The vacuum has a float mechanism that will stop suction when the tank is full.
5. When finished, turn off the vacuum cleaner, unplug it, and empty the tank immediately.

Slika 4.2: The vacuum cleaner effectively cleaning a spilled liquid (red wine) from a tiled floor.

4.3. Blowing Function

The blowing function is useful for clearing leaves, dust from hard-to-reach areas, or inflating items.

1. Odvojite fleksibilno crijevo od usisnog ulaza.
2. Connect the flexible hose to the blowing outlet, typically located on the rear or side of the motor unit.
3. Uključite kabl za napajanje u električnu utičnicu.
4. Turn on the vacuum cleaner. Air will now exit through the hose.
5. Direct the airflow as needed.
6. When finished, turn off the vacuum cleaner and unplug it.

Slika 4.3: A user utilizing the blowing function to clear leaves and debris from an outdoor path.

5. Održavanje i njega

Redovno održavanje osigurava optimalne performanse i produžava vijek trajanja vašeg usisivača.

5.1. Pražnjenje rezervoara

The 30-liter tank should be emptied regularly, especially after wet vacuuming.

1. Provjerite je li usisivač isključen i iskopčan iz struje.
2. Unclip the motor unit from the tank and lift it off.
3. For liquids, use the drainage plug located at the bottom of the tank to easily empty the contents into a drain.

Slika 5.1: Close-up view of the drainage plug on the Cecotec Conga Rockstar Wet & Dry Steel Pro, designed for easy emptying of liquids.
4. For solids, carefully tip the tank to dispose of the debris.
5. Očistite unutrašnjost rezervoara vodom i blagim deterdžentom ako je potrebno, a zatim dobro osušite.
6. Reassemble the motor unit onto the tank, ensuring clips are securely fastened.

5.2. Čišćenje i zamjena filtera

The dual filtration system includes a HEPA filter for dry use and a foam filter for wet use. Clean or replace filters as needed.

1. Provjerite je li usisivač isključen i iskopčan iz struje.
2. Remove the motor unit from the tank.
3. HEPA Filter (for dry use): Gently tap the filter to dislodge dust. If heavily soiled, wash it under running water. Allow it to air dry completely (24-48 hours) before reinstallation. Do not use the vacuum with a wet HEPA filter. Replace the HEPA filter periodically for optimal performance.
4. Pjenasti filter (za mokru upotrebu): Rinse the foam filter under running water. Squeeze out excess water and allow it to air dry completely before storage or reinstallation.
5. Reinstall the appropriate filter securely before using the vacuum cleaner.

5.3. Accessory Care

Clean all accessories after use to prevent blockages and maintain hygiene. Rinse with water and mild detergent, then allow to air dry.

6. Otkrivanje problema

Ako imate problema s usisivačem, pogledajte sljedeće uobičajene probleme i rješenja:

7. Tehničke specifikacije

8. Garancija i korisnička podrška

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Cecotec webSačuvajte dokaz o kupovini za eventualne reklamacije.

For further assistance, you may contact Cecotec customer service directly through their official channels.