ASPERX AX2500 Uputstvo za upotrebu za automobilski startni uređaj

Uvod

The ASPERX AX2500 Car Jump Starter is a portable, multi-functional device designed to provide emergency jump-starting for vehicles, act as a portable power bank, and offer various lighting modes. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.

Image: The ASPERX AX2500 Car Jump Starter unit, smart jump cables, wall charger, USB Type-C cable, storage case, and cigarette lighter adapter.

Šta je u kutiji

• ASPERX 2500A Portable Car Jump Starter x1
• Smart Jump Cable x1
• 5V/3.0A zidni punjač x1
• USB Type-C kabel za punjenje x1
• Torbica za pohranu x1
• Cigarette Lighter Adapter x1
• Uputstvo za upotrebu x1

Product Overview

Ključne karakteristike

• Powerful Car Jump Starter: 2500A peak current, capable of starting 12V vehicles with up to 10.0L Gas or 7.3L Diesel engines. Operates in extreme climates (-4°F to 140°F).
• 10 Upgrade Protections: Features zero voltage start function and automatically detects reverse polarity for safe connections. Notifies incorrect use with flashing lights.
• Portable Power Supply: Equipped with 2 USB outputs (5V/3A and 5V/2.1A), including a Quick Charge 3.0 USB port for fast charging of mobile devices.
• LED bljeskalica: Includes four modes: Flash Light, Strobe Light, SOS Light, and Red Warning Light. Supports up to 60 hours of high-brightness lighting.

Slika: Detaljna view of the ASPERX AX2500 showing its various ports including USB-C, USB-A, and the 12V Jumper Cable port.

Setup

Punjenje Jump Startera

1. Connect the USB Type-C Charging Cable to the jump starter's USB-C input port.
2. Plug the other end of the USB Type-C cable into the provided 5V/3.0A wall charger.
3. Uključite zidni punjač u utičnicu.
4. The battery indicator lights on the jump starter will illuminate to show charging progress. Ensure the unit is fully charged before first use.

It is recommended to fully charge the jump starter every 3-6 months to maintain optimal battery health, even when not in use.

Uputstvo za upotrebu

Uskočno pokretanje vašeg vozila

Before attempting to jump-start, ensure the jump starter has at least 50% charge. For optimal performance, a full charge is recommended.

Image: Visual guide illustrating the four steps to jump-start a vehicle: Insert, Connect, Ready, Start.

1. Step 1: Insert Smart Jump Cable
   Insert the blue end of the smart jump cable into the 12V Jumper Cable port on the jump starter. Ensure a secure connection.
2. Step 2: Connect to Car Battery
   Pričvrstite crveni clamp na pozitivni (+) pol akumulatora vašeg vozila i crni clamp na negativni (-) terminal.
3. Step 3: Check LED Indicator
   The smart jump cable has an LED indicator. A solid green light indicates a correct connection and that the jump starter is ready. If the light is red or flashing, check connections and battery status.
4. Step 4: Start Vehicle
   Once the LED indicator is solid green, start your vehicle's engine. If the vehicle does not start immediately, wait 30 seconds before trying again.
5. Korak 5: Prekinite vezu
   After the vehicle starts, immediately remove the smart jump cable clamps from the car battery terminals, then disconnect the cable from the jump starter.

Koristi se kao prenosivi Power Bank

The AX2500 can charge various electronic devices:

• Connect your device's USB charging cable to one of the two USB output ports (5V/3A or 5V/2.1A) on the jump starter.
• The Quick Charge 3.0 port provides faster charging for compatible devices.

Rad LED svjetiljke

The built-in LED light offers multiple modes for different situations:

1. Press and hold the power button for 3 seconds to turn on the flashlight (Flash Light mode).
2. Tap the power button again to cycle through Strobe Light, SOS Light, and Red Warning Light modes.
3. Press and hold the power button for 3 seconds to turn off the flashlight.

Image: The ASPERX AX2500 displaying its Normal, Strobe, SOS, and Red Warning light modes, highlighting its use as an emergency rescuer.

Održavanje

• Skladištite jump starter na hladnom i suhom mjestu dalje od direktne sunčeve svjetlosti i vlage.
• Recharge the unit fully every 3-6 months to prolong battery life, even if not used.
• Održavajte uređaj čistim i bez prašine i ostataka.

Rješavanje problema

• Jump Starter Not Activating: Ensure the unit is charged above 50%. Check all cable connections for proper seating.
• Smart Jump Cable Indicator Light Issues: If the indicator is red or flashing, recheck the connections to the battery terminals. Ensure terminals are clean and free of corrosion.
• Vehicle Not Starting After Connection: Ensure the jump starter has sufficient charge. If the battery is completely dead, you may need to use the boost function (refer to the smart cable instructions for specific boost activation).
• Uređaj se ne puni: Verify that the charging cable and wall adapter are correctly connected and functioning. Try a different USB-C cable or adapter if available.

Specifikacije

Garancija i podrška

The ASPERX AX2500 Car Jump Starter comes with 2-Years Technical Support. For any after-sales questions or assistance, please contact AsperX customer service.