Brook Wingman FGC Converter Instruction Manual

1. Uvod

The Brook Wingman FGC Converter is a high-precision, no-lag arcade joystick converter designed to enhance your fighting game experience. It allows you to use a wide range of wired fighting sticks on your PlayStation 5 (for fighting games only), PlayStation 4, and PC (X-input), ensuring compatibility and extending the life of your favorite controllers. This manual provides detailed instructions for setup, operation, and advanced features.

2. Podešavanje

2.1 Initial Connection to Console

To begin, plug the Wingman FGC Converter directly into an available USB port on your PlayStation 5 console. Once connected, the blue indicator lights on the converter will start flashing slowly, signifying a successful connection to the console.

Image: The Wingman FGC Converter inserted into the USB port of a PS5 console, with its blue indicator lights visible.

2.2 Connecting Your Wired Fighting Stick

After the converter is connected to the console, plug your wired fighting stick into the USB port on the Wingman FGC Converter. A steady blue light on the converter will indicate that the connection between your fighting stick and the converter has been successfully established.

Image: A visual representation of the connection flow: Wired Fighting Stick → Wingman FGC → PS5/PS4/PC.

3. Uputstvo za upotrebu

The Wingman FGC Converter offers advanced features such as Turbo, Remap, and Macro functions. These can be configured to enhance your gameplay. For detailed instructions on setting up and canceling these functions, please refer to the video tutorials below. Note that for competitive play, you may need to update to a firmware version that disables these functions.

3.1 Turbo Function Settings

The Turbo function allows for rapid, repeated button presses. To activate and configure:

1. Pritisnite i držite SHARE i PS buttons simultaneously. The converter's LED will display Red, indicating entry into Turbo setting mode.
2. Dok drži SHARE, press the button you wish to set as Turbo (e.g., Triangle, Square, Circle, X).
3. Pritisnite OPCIJA dugme za spremanje postavki.
4. Exit Turbo setting mode by pressing the PS button. The Red LED will turn off.

Adjusting Turbo Frequency

You can adjust the speed of the Turbo function:

1. Pritisnite i držite SHARE i PS buttons simultaneously. The LED will display Red.
2. To increase frequency, press SHARE i Up-arrow button simultaneously. The flashing frequency of the light will increase.
3. To decrease frequency, press SHARE i Down-arrow button simultaneously. The flashing frequency of the light will decrease.
4. Pritisnite OPCIJA dugme za spremanje postavki.
5. Exit Turbo setting mode by pressing the PS button. The Red LED will turn off.

Default Turbo speed is 10 rapid presses per second. Options include 5, 10, 15, 20, and 25 rapid presses per second.

Canceling Turbo Function

1. Pritisnite i držite SHARE i PS buttons simultaneously. The LED will display Red.
2. Pritisnite SHARE i OPCIJA simultaneously to clear all Turbo settings.
3. Exit Turbo setting mode by pressing the PS button. The Red LED will turn off.

3.2 Button Remap Settings

Remap allows you to change the function of a button. To set up:

1. Pritisnite i držite OPCIJA i PS buttons simultaneously. The LED will turn Red, indicating entry into Remap setting mode.
2. Choose the button you want to remap (e.g., if you want to convert Triangle to Circle): Press and release the Triangle button first. Then, simultaneously press SHARE and the Circle button.
3. Pritisnite OPCIJA dugme za spremanje postavki.
4. Exit Remap setting mode by pressing the PS button. The Red LED will turn off.

Remap Combo Settings

You can also set up Remap for combo keys:

1. Pritisnite i držite OPCIJA i PS buttons simultaneously. The LED will turn Red.
2. Za nprample, if you want to set the Triangle button as a combination of Square and X: Press the Triangle button first, and then simultaneously press SHARE i Square + X.
3. Pritisnite OPCIJA dugme za spremanje postavki.
4. Exit Remap setting mode by pressing the PS button. The Red LED will turn off.

Canceling Button Remap Settings

1. Pritisnite i držite OPCIJA i PS buttons simultaneously. The LED will turn Red.
2. Pritisnite OPCIJA i SHARE at the same time to clear all Remap settings.
3. Exit Remap setting mode by pressing the PS button. The Red LED will turn off.

3.3 Postavke makroa

Macro allows you to record a sequence of button presses. To set up:

1. Pritisnite i držite SHARE, OPCIJA, i PS key at the same time. The LED will show Purple, indicating entry into Macro setting mode.
2. Record your desired button sequence (e.g., recording L1 with the combination of Down, Right, Down, Right, and Circle). Hold down the SHARE button first, then press the Macro key you want to set. Release all keys when the Red light appears, and start recording your Macro settings.
3. Pritisnite i držite OPCIJA button for about 1-2 seconds to save.
4. Pritisnite i držite PS key for about 1-2 seconds until the Blue light appears, indicating that the setting mode has been exited.

Canceling Macro Settings

1. Pritisnite i držite SHARE, OPCIJA, i PS key at the same time. The LED will show Purple.
2. Pritisnite SHARE i OPCIJA at the same time to clear all Macro settings.
3. Exit the Macro setting mode by pressing the PS button. The Red LED will turn off.

4. Kompatibilnost

The Brook Wingman FGC Converter is designed for broad compatibility with various gaming platforms and fighting sticks:

• Konzole: Supports PlayStation 5 (Fighting Games Only), PlayStation 4, and PC (X-input) via wired connection.
• Arcade Joysticks: Compatible with over 60 different fight sticks from more than 20 brands.

For a complete and updated list of supported fight sticks, please visit the official Brook website. If your preferred wired controller is not listed, you may submit a request to Brook for future compatibility consideration.

Image: A diverse collection of wired fighting sticks, illustrating the extensive compatibility of the Wingman FGC Converter.

5. Otkrivanje problema

If you encounter any issues while using your Brook Wingman FGC Converter, please consider the following common troubleshooting steps:

• Provjera veze: Ensure the converter is securely plugged into the console's USB port and your fighting stick is firmly connected to the converter. Verify the indicator lights are behaving as expected (slow blue flash for console connection, steady blue for fight stick connection).
• Kompatibilnost: Double-check if your specific fighting stick model is listed as compatible on the official Brook website.
• Ažuriranje firmvera: Ensure your Wingman FGC Converter has the latest firmware. Firmware updates often include bug fixes and expanded compatibility. Visit the Brook official website's download section for the latest versions.
• Postavke funkcije: If Turbo, Remap, or Macro functions are not working as expected, review the operating instructions in Section 3 or the video tutorials to ensure correct setup. For competitive play, ensure you have the correct firmware version installed (without these functions).

For more detailed troubleshooting guides or persistent issues, please refer to the official User Guide (PDF) available on the product page or contact Brook customer support directly.

6. Specifikacije

7. Garancija i podrška

Brook products are designed for reliability and performance. For information regarding product warranty, technical support, and the latest firmware updates, please visit the official Brook Gaming website. You can also find a detailed User Guide in PDF format for this product via the following link: Brook Wingman FGC User Guide (PDF).

Thank you for choosing Brook. We hope you enjoy an enhanced gaming experience!