Uvod
This manual provides comprehensive instructions for the safe and proper installation and use of your Flexson Wall Mount for SONOS ERA100. Please read all instructions carefully before beginning installation.
The Flexson Wall Mount is designed to securely hold your SONOS ERA100 speaker, allowing for optimal sound positioning with its unique tilting mechanism and 80-degree swivel capability. It is constructed from durable alloy steel with a powder-coated finish.
Sadržaj paketa
Prije instalacije, provjerite da li su sve komponente prisutne:
- 1 x Flexson Wall Mount
- Uputstvo za upotrebu
- Fixings (screws, wall plugs)
- Corner Adapter (optional use)
Slika 1: Eksplodirao view of the Flexson Wall Mount for SONOS ERA100, showing all included components and fixings for assembly.
Sigurnosne informacije
- Ensure the mounting surface can support the combined weight of the mount and the SONOS ERA100 speaker.
- Koristite odgovarajući alat i sigurnosnu opremu tokom instalacije.
- If unsure about installation, consult a qualified professional.
- Držite male dijelove podalje od djece.
Postavljanje i instalacija
Follow these steps for proper installation of your Flexson Wall Mount:
- Odaberite lokaciju: Select a suitable wall location, ensuring it is structurally sound and free from electrical wires or plumbing.
- Označite tačke bušenja: Hold the wall bracket against the wall at the desired height and use a pencil to mark the drilling points.
- Izbušite rupe: Drill pilot holes at the marked points. The size of the drill bit will depend on the type of wall and the provided wall plugs.
- Umetnite zidne tiple: Insert the appropriate wall plugs into the drilled holes.
- Pričvrstite zidni nosač: Secure the wall bracket to the wall using the provided screws. Ensure it is firmly attached.
- Assemble Speaker Cradle: Attach the speaker cradle components as per the diagram, ensuring all screws are tightened.
- Montaža zvučnika: Carefully place your SONOS ERA100 speaker into the assembled cradle. The mount can be inverted to hold the speaker upside down if desired.
- Attach Speaker to Wall Bracket: Secure the speaker cradle with the speaker to the wall bracket. Ensure the locking mechanism is engaged.
- Podesite poziciju: Adjust the speaker's tilt (up to 20 degrees down) and swivel (80 degrees) to achieve the desired sound direction.
Slika 2: Front view of the Flexson Wall Mount securely holding a SONOS ERA100 speaker, demonstrating its discreet design.
Slika 3: Side view of the mounted SONOS ERA100 speaker, highlighting the compact profile of the Flexson Wall Mount.
Slika 4: Ugao view of the SONOS ERA100 speaker on the Flexson Wall Mount, showcasing its integration with the speaker's design.
Uputstvo za upotrebu
Once installed, the Flexson Wall Mount allows for flexible positioning of your SONOS ERA100 speaker.
- Naginjanje: The mount features a unique tilting mechanism. Gently adjust the speaker to tilt it downwards by up to 20 degrees to direct sound.
- Okretno: The mount allows for an 80-degree swivel (40 degrees left and 40 degrees right) to optimize sound direction. Carefully rotate the speaker to the desired angle.
- Inverzna montaža: The design allows the speaker to be mounted upside down if required for specific aesthetic or acoustic needs.
Slika 5: Krupni plan strane view illustrating the secure attachment and potential for adjustment of the SONOS ERA100 speaker on the Flexson Wall Mount.
Održavanje
The Flexson Wall Mount requires minimal maintenance.
- čišćenje: Wipe the mount with a soft, dry cloth to remove dust. Avoid abrasive cleaners or solvents.
- Periodična provjera: Periodically check all screws and fixings to ensure they remain tight and secure.
Rješavanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nosač se čini labavim na zidu | Screws or wall plugs not properly secured. | Tighten all wall mounting screws. Ensure correct wall plugs were used for your wall type. |
| Speaker not stable in cradle | Cradle components not fully assembled or tightened. | Check all screws securing the speaker cradle. Ensure the speaker is correctly seated. |
| Difficulty adjusting tilt/swivel | Adjustment mechanism is too tight. | Do not force. Check the manual for specific adjustment points and loosen slightly if necessary. |
Specifikacije
| Broj modela | FLXE100WM1021 |
| Brand | Flexson |
| Kompatibilni zvučnik | SONOS ERA100 |
| Materijal | legirani čelik |
| Boja | Crna |
| Tip završetka | Powder Coated |
| Dimenzije proizvoda | 6.93 x 4.72 x 6.02 inča (17.6 x 12 x 15.3 cm) |
| Težina artikla | 14.4 unci (0.41 kg) |
| Kapacitet opterećenja | 14.2 funti (6.44 kg) |
| Podešavanje nagiba | Up to 20 degrees downwards |
| Podesivo okretanje | 80 degrees (40 degrees left, 40 degrees right) |
Garancija i podrška
For warranty information and technical support, please refer to the official Flexson webweb-mjesto ili kontaktirajte njihovu službu za korisnike. Sačuvajte račun kao dokaz o kupovini.
Proizvođač: Flexson
Webstranica: Visit the Flexson Store on Amazon (za opće informacije o brendu)
