1. Proizvod je gotovview
The VIMIN 5-Port Gigabit PoE Switch is an unmanaged Ethernet switch designed for reliable high-speed data transmission and power delivery over network cables. It features four Power over Ethernet (PoE+) RJ45 ports and one Gigabit uplink port, making it suitable for connecting various network devices such as NVRs, IP cameras, access points, and more. Its robust metal housing allows for versatile installation options, including desktop placement or wall-mounting.
Image: The VIMIN 5-Port Gigabit PoE Switch, showcasing its compact design and front panel with ports and indicators.
Ključne karakteristike uključuju:
- 4x Gigabit PoE+ Ports: Delivers up to 30W per port with a total power budget of 72W, supporting IEEE 802.3af/at standards.
- 1x Gigabit Uplink Port: For high-speed connection to your main network or NVR.
- One-Key VLAN Mode: Enhances network security and bandwidth by isolating PoE ports while maintaining uplink communication.
- Plug & Play: Requires no complex configuration for immediate use.
- Robusna zaštita: Features 4KV lightning protection for enhanced device safety.
- Dizajn bez ventilatora: Ensures silent operation, suitable for various environments.
2. Upute za postavljanje
Follow these steps to set up your VIMIN 5-Port Gigabit PoE Switch:
- Raspakujte uređaj: Carefully remove the PoE switch, power cable, and user manual from the packaging.
- Priključite napajanje: Connect the included power cable to the power input port on the back of the switch and then plug it into a standard electrical outlet. The power indicator light on the front panel should illuminate.
- Connect Uplink Device: Connect your router, NVR, or main network device to the Gigabit uplink port (Port 5) using a standard Ethernet cable.
- Povežite PoE uređaje: Connect your PoE-compatible devices (e.g., IP cameras, access points, VoIP phones) to any of the PoE+ ports (Ports 1-4) using Ethernet cables. The switch will automatically detect and power these devices if they are IEEE 802.3af/at compliant.
- Potvrdite veze: Check the LED indicators on the front panel. The 'Power' LED should be solid green. The 'Link/Act' LEDs for connected ports should be solid green (link) and blink (activity).
Image: Illustration of the PoE switch's front and rear, highlighting the built-in power supply and port designations (PoE ports 1-4, Uplink port 5).
Image: A visual guide to the plug-and-play setup, showing power connection, device connection (camera, AP, computer, printer), and network router connection.
The switch is designed for plug-and-play operation, requiring no software configuration for basic network functionality.
Image: The VIMIN PoE switch with its dimensions (14cm/5.5in length, 20cm/7.9in width, 4.4cm/1.7in height), emphasizing its compact size and plug-and-play nature.
Metode instalacije
The VIMIN PoE switch offers flexible installation options:
- Položaj na radnoj površini: Jednostavno postavite prekidač na ravnu, stabilnu površinu.
- Montaža na zid: Metalni casing is designed for easy wall-mounting using appropriate screws (not included).
Image: Two installation methods are depicted: the switch placed on a desk and mounted vertically on a wall, demonstrating its versatility.
3. Uputstvo za upotrebu
Once the switch is powered on and devices are connected, it operates automatically. Here are specific operational features:
Funkcionalnost porta
- PoE+ portovi (1-4): These ports provide both data connectivity and power to connected IEEE 802.3af/at compliant devices. Each port can deliver up to 30W.
- Uplink Port (5): This port is a standard Gigabit Ethernet port for connecting to your main network infrastructure. It does not provide PoE.
Image: The PoE switch is shown as a central hub connecting an Access Point, Router, Computer, Camera, Printer, and IP Phone, illustrating its broad compatibility.
One-Key VLAN Mode
The switch features a One-Key VLAN mode to enhance network security and performance. To activate or deactivate VLAN mode, use the dedicated switch on the front panel:
- VLAN ON: In this mode, PoE ports 1-4 are isolated from each other, preventing direct communication between devices connected to these ports. They can still communicate with the uplink port (Port 5). This is useful for preventing IP camera interference or enhancing security in multi-device setups.
- VLAN OFF (Ordinary Mode): All connected devices can communicate directly with each other, as in a standard unmanaged switch.
Image: A visual representation of the VLAN toggle switch on the PoE device, explaining the 'ON' (VLAN Mode) and 'OFF' (Ordinary Mode) functionalities with their respective benefits.
Gigabitne performanse
The switch supports Gigabit Ethernet (1000 Mbps) on all ports, providing significantly faster data transfer rates compared to traditional 100 Mbps networks.
Image: A graphic demonstrating that the Gigabit switch offers speeds 10 times faster than a 100Mbps network, highlighting its superior performance.
4. Održavanje i njega
To ensure optimal performance and longevity of your VIMIN PoE Switch, consider the following:
- Uslovi okoline: Operate the switch within its specified temperature range (14°F to 131°F / -10°C to 55°C) and humidity levels. Avoid direct sunlight, excessive heat sources, and damp okruženja.
- čišćenje: Za čišćenje vanjske strane prekidača koristite meku, suhu krpu. Ne koristite tekuća ili aerosolna sredstva za čišćenje.
- ventilacija: Ensure proper airflow around the switch. Although it has a fanless design, adequate ventilation helps dissipate heat.
- Zaštita od groma: The switch features 4KV lightning protection. While this provides significant safeguarding, it is still advisable to disconnect the switch during severe electrical storms if possible.
- Dizajn bez ventilatora: The fanless design contributes to silent operation and reduces dust accumulation inside the device, minimizing maintenance needs.
Image: The PoE switch is depicted in both cold (14°F) and hot (131°F) environments, emphasizing its reliability under extreme temperature conditions.
Image: The PoE switch is shown in a quiet home setting, illustrating its fanless design for zero noise and its durable metal casing.
5. Otkrivanje problema
If you encounter issues with your VIMIN PoE Switch, refer to the following common troubleshooting steps:
- Nema napajanja:
- Provjerite je li kabel za napajanje sigurno spojen i na prekidač i na ispravnu električnu utičnicu.
- Provjerite da li je utičnica funkcionalna tako što ćete uključiti drugi uređaj.
- Nema veze/aktivnosti na portu:
- Verify that the Ethernet cable is properly connected at both ends (switch port and connected device).
- Pokušajte s drugim Ethernet kabelom kako biste isključili probleme s kabelom.
- Provjerite da li je povezani uređaj uključen i da ispravno funkcioniše.
- For PoE ports, confirm the connected device is IEEE 802.3af/at compliant. Passive PoE devices are not supported.
- PoE uređaj ne prima napajanje:
- Check the total power budget (72W) and individual port power (30W). Ensure you are not exceeding the switch's capacity with multiple high-power devices.
- Verify the device requires PoE and is compatible with IEEE 802.3af/at standards.
- Pokušajte spojiti uređaj na drugi PoE port.
- Network Performance Issues (Slow Speed):
- Osigurajte da svi povezani uređaji i kablovi podržavaju Gigabit Ethernet za optimalnu brzinu.
- Provjerite ima li prekomjernog mrežnog prometa ili petlji.
- If VLAN mode is enabled, ensure it is configured as desired for your network setup.
- Devices on PoE Ports Cannot Communicate with Each Other:
- Check the One-Key VLAN switch. If it is in 'ON' position, ports 1-4 are isolated. Switch it to 'OFF' for direct communication between these ports.
If issues persist after following these steps, please contact VIMIN customer support.
6. Specifikacije
Detailed technical specifications for the VIMIN 5-Port Gigabit PoE Switch:
| Feature | Opis |
|---|---|
| Broj modela | 5 Port | 4xPoE + 72W | 1xUPLink |
| Broj portova | 5 (4x PoE+, 1x Uplink) |
| PoE standard | IEEE 802.3af/at (Note: Does NOT support passive PoE) |
| Maksimalna snaga po PoE portu | 30W |
| Ukupni budžet PoE napajanja | 72W |
| Brzina prijenosa podataka | 1000 megabita u sekundi (gigabitni Ethernet) |
| Preklopni kapacitet | 10 Gbps |
| Interface Type | PoE, RJ45 |
| Materijal kućišta | Metal |
| Instalacija | Desktop or Wall-Mount |
| Dimenzije (D x Š x V) | 14 cm x 20 cm x 4.4 cm (5.5 in x 7.9 in x 1.7 in) |
| Težina artikla | 1.94 funti (0.88 kilograma) |
| Radna temperatura | 14°F do 131°F (-10°C do 55°C) |
| Uključene komponente | 1* User Manual, 1* 5-Port PoE Switch, 1* Power Cable |
| Kompatibilni uređaji | Access Point, Camera, Computer, Printer, Router |
| UPC | 756166576957 |
Image: A visual representation of the power capabilities, indicating 30W per PoE port and a total power budget of 72W for the switch.
Image: A diagram illustrating the 10 Gbps switching capacity of the VIMIN PoE switch, indicating its high-speed data processing capability.
7. Garancija i podrška
VIMIN is committed to providing reliable products and excellent customer service. For specific warranty details, please refer to the documentation included with your product or visit the official VIMIN website.
Korisnička podrška
If you require technical assistance, have questions about your product, or need to report an issue, please contact our support team:
- Podrška putem e-pošte: support@vimintech.com
- Professional Technical Team: Access to a dedicated team for technical inquiries.
- 24H High Quality Service: Committed to providing timely and effective support.
Image: Contact details for VIMIN support, including email address, mention of a professional technical team, and 24-hour high-quality service.
