1. Uvod
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Trak Racer TR80 Racing Simulator MK5. Designed for serious sim racers, the TR80 offers a robust and highly adjustable platform for an immersive racing experience. Please read this manual thoroughly before beginning assembly or operation to ensure proper setup and safe use.
2. Sigurnosne informacije
UPOZORENJE: Nepoštivanje ovih sigurnosnih uputa može dovesti do ozljeda ili oštećenja proizvoda.
- Ensure all bolts and fasteners are securely tightened before use. Periodically check for loose connections.
- Do not exceed the weight capacity of the simulator. Refer to specifications for details.
- Držite ruke i prste dalje od pokretnih dijelova tokom podešavanja.
- Assemble the simulator on a flat, stable surface.
- Držite male dijelove van domašaja djece.
- Disconnect all electronic peripherals from power before performing maintenance or adjustments.
3. Sadržaj paketa
Verify that all components listed below are present in your package. If any parts are missing or damaged, contact Trak Racer support.
- Aluminium Profile Frame Components (various lengths and profiles)
- Hybrid Formula & GT Pedal System Mount
- Trak Racer TR One Wheel Mount (or compatible wheel deck/uprights)
- Seat Slider Rails
- Universal TR One Gear Shift Mount
- Heavier Duty Brackets and Fasteners
- Assembly Hardware (bolts, nuts, T-nuts, washers, tools)
- Uputstvo za upotrebu (ovaj dokument)
Slika: Prekoview of the Trak Racer TR80 Racing Simulator MK5 frame components, showing the aluminum profiles, pedal plate, and wheel uprights.
4. Postavljanje i montaža
Assembly of the Trak Racer TR80 requires basic hand tools (often included) and can be completed by one person, though assistance is recommended for certain steps.
4.1. Sklop okvira
- Unpack all components and lay them out. Identify the base frame profiles.
- Assemble the main base frame using the provided brackets and T-nuts. Ensure all connections are snug but do not fully tighten until the frame is squared.
- Attach the uprights for the wheel mount to the main base frame.
- Install the cross-members and supports for the pedal plate and seat.
Image: Partially assembled Trak Racer TR80 frame, highlighting the pedal plate and wheel uprights.
4.2. Pedal System Installation
- Mount your pedal set to the Hybrid Formula & GT Pedal System plate using the appropriate bolts.
- Attach the pedal plate assembly to the designated frame profiles. Adjust the angle and distance as desired before tightening.
4.3. Wheel Mount Installation
- Secure your steering wheel base to the Trak Racer TR One Wheel Mount or compatible wheel deck.
- Attach the wheel mount assembly to the uprights. Adjust height and distance for optimal ergonomics.
4.4. Seat and Gear Shifter Installation
- Install the seat slider rails onto the seat mounting profiles.
- Mount your racing seat to the seat slider rails.
- Attach the universal TR One gear shift mount to the side of the frame. Secure your gear shifter to this mount.
Image: Fully assembled Trak Racer TR80 Racing Simulator MK5, including a racing seat and pedal set.
5. Uputstvo za upotrebu
Once assembled, the TR80 provides a stable platform for your racing peripherals.
5.1. Povezivanje perifernih uređaja
- Connect your steering wheel, pedals, and gear shifter to your PC or console according to their respective manufacturer's instructions.
- Ensure all cables are routed safely to prevent tripping hazards and cable damage.
5.2. Adjusting Your Setup
- Use the seat slider to adjust your seating position forward or backward.
- The pedal plate and wheel mount offer multiple adjustment points for angle, height, and distance. Loosen the relevant bolts, adjust, and re-tighten securely.
- The gear shifter mount can also be adjusted for optimal reach.
5.3. Konfiguracija softvera
Refer to the software and driver instructions provided by your peripheral manufacturers for calibration and in-game settings.
6. Održavanje
Regular maintenance will ensure the longevity and performance of your TR80 simulator.
- čišćenje: Wipe down aluminum profiles and other surfaces with a soft, damp tkanina. Izbjegavajte abrazivna sredstva za čišćenje.
- Provjera pričvršćivača: Periodically inspect all bolts, nuts, and connections for tightness. Re-tighten any loose fasteners to maintain rigidity.
- podmazivanje: If seat sliders or other moving parts become stiff, apply a small amount of silicone-based lubricant.
7. Otkrivanje problema
Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti.
| Issue | Mogući uzrok | Rješenje |
|---|---|---|
| Simulator feels wobbly or unstable. | Labavi pričvršćivači; neravnomjerna montaža. | Check and tighten all bolts and connections. Ensure the frame is square during assembly. |
| Difficulty adjusting seat or peripheral mounts. | Bolts are too tight; debris in tracks. | Loosen bolts slightly before adjusting. Clean tracks if necessary. Apply lubricant to sliders. |
| Nedostajući ili oštećeni dijelovi prilikom isporuke. | Shipping damage; packing error. | Contact Trak Racer customer support immediately with proof of purchase and details of the issue. |
8. Specifikacije
- Model: Trak Racer TR80 Racing Simulator MK5
- Brand: Trak Racer
- ASIN: B0BY8GFVTC
- Proizvođač: Trak Racer
- Datum prve dostupnosti: 13. marta 2023
- Građevinski materijal: Thicker-walled Aluminum Profile
- Kompatibilnost: PC Compatible (with appropriate peripherals)
- Ključne karakteristike: Hybrid Formula & GT Pedal System, TR One Wheel Mount Compatible, Seat Slider Rails, Universal TR One Gear Shift Mount, Flight Simulator Expandable.
9. Garancija i podrška
For warranty information, technical support, or to purchase additional accessories, please visit the official Trak Racer webstranice ili kontaktirajte njihov odjel za korisničku podršku.
Trak Racer Official Webstranica: www.trakracer.com
