1. Uvod
This manual provides detailed instructions for the assembly, operation, and maintenance of your BONTEC FITW-2 Mobile TV Stand. Please read this manual thoroughly before installation and use to ensure safe and correct operation. Retain this manual for future reference.
The BONTEC FITW-2 is a versatile mobile TV stand designed to accommodate most 30-70 inch plasma, LCD, and LED screens weighing up to 40 kg. It features adjustable height, swivel functionality, two tempered glass shelves for media devices, and lockable wheels for easy mobility.
Slika 1.1: Gotovoview of the BONTEC FITW-2 Mobile TV Stand.
2. Sigurnosne informacije
UPOZORENJE: Failure to read and follow all instructions may result in personal injury or property damage. The manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
- Prije sastavljanja provjerite jesu li sve komponente prisutne i neoštećene. Ne koristite oštećene dijelove.
- Do not exceed the maximum weight capacity of 40 kg (88 lbs) for the TV and 60 kg (bottom shelf) / 10 kg (top shelf) for the shelves.
- This TV stand is designed for screens between 30 and 70 inches. Verify your TV's VESA pattern is compatible (75x75mm to 600x400mm).
- Sastavite postolje na mekoj, čistoj površini kako biste spriječili ogrebotine.
- Always use two people for lifting and mounting the TV to the stand.
- Ensure all screws are securely tightened before moving or using the stand. Do not overtighten.
- Blokirajte kotače kada je stalak u stacionarnom položaju kako biste spriječili slučajno pomicanje.
- Keep children and pets away from the stand during assembly and operation.
- If your TV's height is less than 640 x 425 mm, the mounting arms may protrude beyond the back of the TV. Consider this during installation.
3. Sadržaj paketa
Please verify that all parts are included and undamaged. If any parts are missing or damaged, contact BONTEC customer support.
- Glavni potporni stub
- Base Plate (with pre-installed wheels)
- Upper Tempered Glass Shelf
- Lower Tempered Glass Shelf
- Nosač za montažu televizora
- TV Mounting Arms (2 pieces)
- Set of Wheels (4 pieces, 2 lockable)
- Hardware Kit (screws, washers, spacers, Allen keys, wrench)
- Obujmice za upravljanje kablovima
4. Upute za postavljanje i montažu
Follow these steps carefully for proper assembly. It is recommended to have a second person assist with the assembly, especially when mounting the TV.
Step 4.1: Attach Wheels to Base
Attach the four wheels to the base plate. Ensure the two lockable wheels are positioned at the front for easy access. Tighten securely with the provided wrench.
Step 4.2: Assemble Main Column and Shelves
Secure the main support column to the base plate. Then, attach the upper and lower tempered glass shelves to the main column using the provided hardware. The shelves can be adjusted to different heights during this step or later. Ensure the triangular steel brackets provide stable support for the glass shelves.
Image 4.2: Illustration of the main column, base, and shelf support structure.
Korak 4.3: Pričvrstite nosač za montažu TV-a na stup
Attach the TV mounting bracket to the main support column. This bracket allows for height adjustment and swivel. Secure it firmly using the designated bolts.
Korak 4.4: Pričvrstite montažne ruke na TV
Identify the VESA mounting holes on the back of your TV. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV. Attach the two TV mounting arms to the back of your TV. Ensure they are level and securely fastened.
Image 4.4: VESA compatibility and dimensions. Note the warning regarding TV size and mounting arm protrusion.
Korak 4.5: Montirajte TV na postolje
With assistance, carefully lift your TV and hook the mounting arms onto the TV mounting bracket on the stand. Ensure the TV is securely seated. Use the safety screws or locking mechanism to prevent the TV from accidentally disengaging from the bracket.
5. Uputstvo za upotrebu
5.1: Height Adjustment
The TV mount offers 6 levels of height adjustment, up to a maximum height of 1310mm. The mounting arms can be adjusted in 2 steps, each by 50mm. The central column also features 3 levels of height adjustment, each by 40mm. To adjust the height, loosen the securing bolts, reposition the TV or shelves to the desired height, and then securely tighten all bolts.
Image 5.1: Height adjustment options for optimal viewing.
5.2: Swivel Function
The TV mounting bracket allows for a swivel of up to ±37 degrees. Gently push the TV to the desired angle. Ensure the stand remains stable during adjustment.
Image 5.2: Swivel capability and wheel locking mechanism.
5.3: Mobility and Locking Wheels
The stand is equipped with four 360° rotating wheels for easy movement. Two of these wheels are lockable. To move the stand, unlock the wheels. To secure the stand in a stationary position, press down on the locking levers on the two lockable wheels until they click into place. The rubber wheels are designed to prevent floor scratches.
5.4: Cable Management
Utilize the integrated cable management clips and holes in the central column to route and organize your TV and device cables. This helps maintain a tidy appearance and prevents cable entanglement.
Image 5.4: Cable management system for an organized setup.
6. Održavanje
- čišćenje: Koristite meku, damp cloth to clean the stand. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.
- Periodične kontrole: Regularly check all screws and bolts to ensure they remain tight. Re-tighten if necessary, but do not overtighten.
- Njega stakla: Handle tempered glass shelves with care. Avoid placing heavy or sharp objects on them that could cause scratches or cracks.
7. Otkrivanje problema
- Stalak je nestabilan:
- Uvjerite se da su svi zavrtnji i vijci dobro zategnuti.
- Verify the TV weight and size are within the specified limits.
- Ensure the stand is on a flat, level surface.
- TV nije ravan:
- Check that the TV mounting arms are attached evenly to the back of the TV.
- Adjust the leveling screws (if applicable) on the TV mounting bracket.
- Wheels not rolling smoothly or locking:
- Check for debris caught in the wheels.
- Ensure the locking mechanism is fully disengaged when moving the stand.
- Ensure the locking mechanism is fully engaged when stationary.
- Mounting arms protrude from behind TV:
- This can occur if your TV's height is less than 640 x 425 mm, as indicated in the compatibility diagram. This is a design characteristic for smaller TVs within the supported range and does not affect functionality or safety if installed correctly.
8. Specifikacije
| Model | FITW-2 |
| Brand | BONTEC |
| Kompatibilnost veličine ekrana | 30 - 70 inča |
| Maksimalni kapacitet težine televizora | 40 kg (88 lbs) |
| VESA kompatibilnost | 75x75, 100x100, 200x100, 200x200, 200x300, 300x300, 300x400, 400x200, 400x300, 400x400, 600x400 mm |
| Upper Shelf Dimensions | 550 x 350 mm |
| Upper Shelf Load Capacity | 10 kg |
| Lower Shelf Dimensions | 380 x 250 mm |
| Nosivost donje police | 60 kg |
| Podešavanje visine | 6 levels (up to 1310mm total height); Mounting arm: 2 steps (50mm each); Board: 3 steps (40mm each) |
| Ugao okretanja | ±37° |
| Materijal | Kaljeno staklo, čelik |
| Boja | Crna |
| Product Dimensions (Parcel) | 68 x 40.4 x 8.8 cm |
| Product Weight (Parcel) | 12.24 kg |
9. Garancija i podrška
BONTEC products are manufactured with quality and care. For warranty information or technical support, please refer to the warranty card included with your product or visit the official BONTEC website. If you encounter any issues or have questions regarding your TV stand, please contact BONTEC customer service for assistance.
Više informacija i kontakt podatke možete pronaći na BONTEC Store Page.
