LANCOM R&S Unified Firewall UF-60 LTE User Manual

1. Uvod

This manual provides essential information for the installation, operation, and maintenance of your LANCOM R&S Unified Firewall UF-60 LTE. Please read this manual thoroughly before using the device to ensure proper setup and functionality. Retain this document for future reference.

2. Sigurnosne informacije

Observe the following safety precautions to prevent damage to the device or injury to personnel:

• Osigurajte da je uređaj postavljen na stabilnu, ravnu površinu.
• Ne izlažite uređaj vlazi, ekstremnim temperaturama ili direktnoj sunčevoj svjetlosti.
• Koristite samo strujni adapter koji ste dobili uz uređaj.
• Ne otvarajte uređaj casing. Za sve servisne radove obratite se kvalifikovanom osoblju.
• Otvore za ventilaciju držite slobodnim kako biste spriječili pregrijavanje.

3. Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

• LANCOM R&S Unified Firewall UF-60 LTE device
• Adapter za napajanje
• Two LTE Antennas
• Ethernet kabl
• Vodič za brzi početak

4. Device Overview

Familiarize yourself with the physical components and indicators of the UF-60 LTE firewall.

Figure 4.1: Front Panel of LANCOM UF-60 LTE
This image displays the front panel of the LANCOM UF-60 LTE Unified Firewall. The device is white with two black external antennas connected at the rear, extending upwards. On the left side of the front panel, the 'LANCOM Systems' and 'ROHDE & SCHWARZ' logos are visible. On the right side, a series of LED indicators are present. These indicators include four for Ethernet ports (labeled ETH0, ETH1, ETH2, ETH3) and additional status indicators for LTE signal, Wi-Fi, and general system status.

4.1. Indikatori na prednjoj ploči

• ETH0-ETH3 LEDs: Indicate activity and link status for the respective Ethernet ports.
• LTE LED: Shows the status of the LTE connection (e.g., signal strength, connection active).
• LED status sistema: Indicates the overall operational status of the device.

4.2. Rear Panel Ports (Typical Configuration)

• Ulazna snaga: Povezuje se na isporučeni adapter za napajanje.
• Ethernet Ports (ETH0-ETH3): For connecting to your network devices (LAN) and WAN.
• LTE Antenna Connectors: For attaching the external LTE antennas.
• Utor za SIM karticu: For inserting a SIM card for LTE connectivity.
• Dugme za resetiranje: Koristi se za vraćanje na fabričke postavke.

5. Podešavanje

5.1. Instalacija hardvera

1. Pričvrstite antene: Screw the two LTE antennas onto the connectors at the rear of the device.
2. Umetnite SIM karticu: Open the SIM card slot cover and insert a valid SIM card. Ensure correct orientation.
3. Povežite mrežne kablove:
   • Connect your internet source (e.g., modem) to the designated WAN Ethernet port (typically ETH0).
   • Connect your local network devices (e.g., computer, switch) to the LAN Ethernet ports (ETH1-ETH3).
4. Priključite napajanje: Plug the power adapter into the device's power input and then into an electrical outlet. The device will power on automatically.

5.2. Pristup početnoj konfiguraciji

After powering on, wait for the system status LED to indicate readiness (refer to the Quick Start Guide for specific LED patterns).

1. Ensure your computer is connected to one of the LAN ports (ETH1-ETH3) of the firewall.
2. Otvori a web pretraživač i unesite zadanu IP adresu (npr. http://192.168.1.1) or the hostname of the device.
3. Follow the on-screen instructions to complete the initial setup wizard, which typically includes setting up administrator credentials, network settings, and basic firewall rules.

6. Rukovanje uređajem

The LANCOM R&S Unified Firewall UF-60 LTE operates primarily through its web-based management interface. This interface allows for comprehensive configuration and monitoring.

6.1. Accessing the Management Interface

To access the management interface:

1. Ensure your computer is connected to the firewall's network.
2. Otvori a web browser and navigate to the device's IP address or hostname.
3. Enter your administrator username and password.

6.2. Key Features and Configuration Areas

• Mrežna konfiguracija: Manage WAN (LTE, Ethernet), LAN, VLANs, and routing.
• Pravila zaštitnog zida: Define security policies, access control lists, and intrusion prevention.
• VPN: Configure Virtual Private Network connections for secure remote access or site-to-site links.
• LTE Management: Monitor LTE signal strength, data usage, and connection status.
• Postavke sistema: Manage user accounts, firmware updates, backups, and logging.

7. Održavanje

7.1. Ažuriranja firmvera

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Firmware updates are typically performed via the web management interface under the 'System' or 'Maintenance' section. Always back up your configuration before performing a firmware update.

7.2. Čišćenje

Clean the device periodically with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions.

7.3. Sigurnosna kopija konfiguracije

It is recommended to regularly back up your device configuration. This allows for quick restoration of settings in case of an issue or when migrating to a new device.

8. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti.

• Nema napajanja:

  Ensure the power adapter is securely connected to both the device and a working electrical outlet. Verify the power outlet is functional.

• No Internet Connection (Ethernet WAN):

  Check the Ethernet cable connection between the firewall's WAN port and your modem/internet source. Verify that your modem is operational and receiving an internet signal. Check WAN configuration in the management interface.

• No Internet Connection (LTE):

  Ensure the SIM card is correctly inserted and active. Check LTE antenna connections. Verify LTE signal strength and connection status in the management interface. Contact your mobile network provider if the SIM card or service is suspected to be the issue.
• Ne mogu pristupiti interfejsu za upravljanje:

  Verify your computer is connected to a LAN port of the firewall. Ensure your computer's IP settings are set to obtain an IP address automatically (DHCP). Try clearing your browser's cache or using a different browser. If the IP address was changed, use the new address. If all else fails, a factory reset might be necessary (refer to the Quick Start Guide for reset procedure).

9. Tehničke specifikacije

Napomena: Specifikacije se mogu promijeniti bez prethodne najave. Za najnovije informacije, molimo vas da se obratite službenim podacima proizvođača. website. The "Connectivity Technology: HDMI" might be a misclassification in the source data, as firewalls typically use Ethernet for primary network connectivity.

10. Garancija i podrška

10.1. Informacije o garanciji

The LANCOM R&S Unified Firewall UF-60 LTE comes with a manufacturer's warranty. Specific warranty terms and conditions, including duration and coverage, are provided by Lancom Systems. Please refer to the warranty card included with your product or visit the official Lancom Systems websajt za detaljnije informacije.

10.2. Tehnička podrška

For technical assistance, product registration, or to download the latest drivers and firmware, please visit the official support portal of Lancom Systems. You may also find FAQs and additional resources there to help resolve common issues.

Proizvođač Webstranica: www.lancom-systems.com