XDeer S009 Biometric Flat Wall Safe

1. Uvod

Thank you for choosing the XDeer S009 Biometric Flat Wall Safe. This manual provides essential information for the safe and efficient operation of your new security product. Please read these instructions thoroughly before installation and use, and retain them for future reference.

2. Važne informacije o sigurnosti

• Always keep emergency keys in a secure location away from the safe and out of reach of unauthorized individuals.
• Do not store the emergency keys inside the safe.
• Ensure the safe is securely mounted according to the installation instructions to prevent unauthorized removal.
• Regularly check battery levels and replace batteries as indicated by the low battery warning to ensure continuous operation.
• Izbjegavajte izlaganje sefa ekstremnim temperaturama ili vlazi.

3. Proizvod je gotovview

The XDeer S009 Biometric Flat Wall Safe is designed for discreet and secure storage of valuables. It features multiple access methods and a robust construction.

Figure 1: XDeer S009 Wall Safe Internal Features
This image highlights the internal layout and key features of the XDeer S009 wall safe, including the biometric fingerprint scanner, numeric keypad, removable dividers, internal LED light, battery slots, programming buttons, and key hooks.

• Hidden Wall Safe Design: Fits between standard 16-inch on-center wall studs for concealed installation.
• Advanced Access Panel: Located on the left side, featuring biometric fingerprint and numeric keypad entry.
• Removable Dividers: Two adjustable shelves for organizing different items.
• Izdržljiva konstrukcija: Made from hardened carbon steel with a pry-resistant door and 10-gauge laminated steel shell.
• Quick Biometric Access: Fingerprint recognition in 0.1 seconds, supporting up to 20 unique fingerprints.
• Višestruke metode unosa: Fingerprint, PIN code, and emergency key access.
• Funkcije prilagođene korisniku: Backlit keypad, internal LED lighting, silent mode, and USB emergency power port.

4. Podešavanje

4.1. Montiranje sefa

The XDeer S009 wall safe is designed to be installed between standard 16-inch on-center wall studs. Ensure you have the necessary tools and understand the wall structure before proceeding.

Slika 2: Dijagram koraka instalacije
This diagram illustrates the three main steps for installing the XDeer S009 wall safe: cutting the wall opening, aligning the safe, and securing it with screws.

1. Priprema otvora u zidu: Cut an opening in the wall between two studs, measuring approximately 20.86 inches high and 14.96 inches wide. The safe is designed to fit 16-inch on-center studs.
2. Align and Insert Safe: Carefully align the safe into the prepared wall opening. Ensure the left side of the safe has two pre-drilled holes and the right side has three pre-drilled holes for mounting.
3. Osigurajte sef: Drive the provided screws through the pre-drilled holes into the wall studs to firmly secure the safe.

4.2. Initial Power-Up and Battery Installation

The safe requires 4 AAA batteries (not included) for operation. The battery compartment is located inside the safe.

1. Open the safe using the emergency key (refer to the emergency key access section if needed).
2. Pronađite odjeljak za baterije na unutrašnjoj strani vrata.
3. Umetnite 4 nove AAA baterije, pazeći na ispravan polaritet.
4. Close the battery compartment. The safe will emit a beep, indicating it is powered on.

5. Operating Your Safe

5.1. Metode pristupa

Your XDeer S009 safe offers three ways to access your valuables:

• Biometrijski otisak prsta: Quick access by scanning a registered fingerprint.
• Numerička tastatura: Access using a programmed PIN code.
• Ključ za hitne slučajeve: Manual override for emergency situations or dead batteries.

5.1.1. Biometric Fingerprint Access

Figure 3: Fingerprint Unlock Mechanism
This image shows the fingerprint sensor on the safe's control panel, indicating where to place your finger for biometric access.

1. Place a registered finger firmly on the fingerprint sensor.
2. The safe will unlock in approximately 0.1 seconds if the fingerprint is recognized.

5.1.2. Numeric Keypad Access

1. Enter your programmed PIN code on the numeric keypad.
2. Pritisnite tipku '#' za potvrdu.
3. The safe will unlock if the PIN code is correct.

5.1.3. Emergency Key Entry

1. Locate the hidden keyhole behind the XDeer logo plate on the control panel.
2. Gently remove the logo plate to expose the keyhole.
3. Umetnite ključ za hitne slučajeve i okrenite ga da biste otključali sef.

5.2. Programming Fingerprints

Figure 4: Fingerprint Technology Overview
This image details the process and specifications of the fingerprint recognition system, including the 0.1-second read time and high DPI.

1. With the safe door open, press the internal programming button (usually located near the battery compartment).
2. Place your finger on the scanner and lift it. Repeat this process 4 times, repositioning your finger slightly each time.
3. The safe will confirm successful registration with a series of beeps.
4. You can register up to 20 individual fingerprints.

5.3. Setting/Changing PIN Code

1. With the safe door open, press the internal programming button.
2. Enter your desired 4-8 digit PIN code on the keypad.
3. Pritisnite tipku '#' za potvrdu.
4. Re-enter the same PIN code and press '#' again to confirm.
5. The safe will confirm successful programming with a series of beeps.

5.4. Tihi način rada

To enable or disable silent mode, press and hold the '0' key on the keypad for 3 seconds. The safe will beep once to confirm the change in mode.

5.5. Backlit Keypad and LED Lights

The keypad illuminates when activated, guiding you to enter your code. The internal LED light provides visibility inside the safe when the door is opened.

6. Njega i održavanje

6.1. Zamjena baterije

When the keypad light flashes 10 times with 10 beeps upon opening, the battery level is critically low. Replace all 4 AAA batteries immediately to ensure continued functionality.

6.2. Čišćenje

Obrišite spoljašnjost sefa mekom,amp krpom. Izbjegavajte upotrebu abrazivnih sredstava za čišćenje ili rastvarača koji bi mogli oštetiti završnu obradu ili elektroničke komponente.

7. Otkrivanje problema

8. Tehničke specifikacije

9. Garancija i korisnička podrška

XDeer provides a 1-year warranty for this product. If you encounter any issues or have questions regarding your XDeer S009 Biometric Flat Wall Safe, please contact XDeer customer support for assistance. Refer to the product packaging or the official XDeer webstranicu za najnovije kontakt informacije.