UTRAI JS-1 PRO 12V Jump Starter User Manual

1. Važne informacije o sigurnosti

Molimo vas da pročitate i razumjete sve sigurnosne informacije prije upotrebe ovog proizvoda. Nepoštivanje ovih uputa može dovesti do strujnog udara, požara ili ozbiljnih povreda.

• Nemoj pokretanje smrznutog akumulatora pomoću kablova.
• Nemoj use the jump starter if the cables or clamps su oštećeni.
• Nemoj connect the positive (+) and negative (-) clamps zajedno.
• Nemoj izložite proizvod kiši ili vlazi.
• Nemoj disassemble the unit. Refer servicing to qualified personnel.
• Osigurajte odgovarajuću ventilaciju tokom upotrebe.
• Čuvati van domašaja djece.
• Nosite zaštitu za oči pri radu s baterijama.
• The unit features an intelligent protection system against short circuit, reverse connection, low voltage, visoki voltage, overcharge, over-discharge, and high temperature.

2. Proizvod je gotovview

The UTRAI JS-1 PRO is a versatile 12V jump starter and portable power bank designed for emergency vehicle starting and charging electronic devices. It features a high capacity battery, multiple charging outputs, and integrated safety tools.

Sadržaj paketa

Image: Contents of the UTRAI JS-1 PRO package, including the jump starter unit, smart booster cables, USB-C charging cable, and user manual.

• UTRAI JS-1 PRO Jump Starter Unit
• Smart Booster Cables
• USB-C kabl za punjenje
• Torbica za pohranu
• Uputstvo za upotrebu

Ključne karakteristike

Slika: Prekoview of the UTRAI JS-1 PRO highlighting its 16000mAh capacity, 2500A peak current, compatibility with all gas and up to 8.5L diesel engines, 10W wireless charging, 3.0 USB fast charging, and lithium power.

• Vršna struja: 2500A (suitable for all 12V gasoline engines and up to 8.5L diesel engines)
• Kapacitet baterije: 16000mAh (can jump start up to 30 times on a full charge)
• Bežično punjenje: 10W for compatible mobile devices.
• USB izlazi: Two USB ports (USB 1-QC3.0: 5V/3A, 9V/2A, 12V/1.5A; USB 2: 5V/2.4A) for charging phones and tablets.
• Integrisana LED Lamp: Features Flashlight, SOS, Strobe, and Red/Blue alternating alarm modes.
• Emergency Escape Hammer: Built-in for emergency situations.
• Funkcija kompasa: Integrisano za navigaciju.
• Full Protection System: Safeguards against short circuit, reverse connection, low/high voltage, overcharge, over-discharge, and high temperature.
• Kompaktan dizajn: Prenosiv i lak za skladištenje.

3. Podešavanje i punjenje

Initial Charge

Before first use, fully charge the UTRAI JS-1 PRO. The unit comes partially charged, but a full charge ensures optimal performance.

1. Connect the supplied USB-C charging cable to the Type-C input port on the jump starter.
2. Connect the other end of the USB-C cable to a USB wall adapter (not included) or a powered USB port.
3. The LCD display will show the charging progress. Charge until the display indicates 100%.

It is recommended to recharge the unit every 3-6 months to maintain battery health, even if not in use.

Provjera nivoa baterije

Pritisnite dugme za napajanje jednom za view the current battery level on the LCD display.

4. Uputstvo za upotrebu

Skoči sa pokretanjem vozila

Ensure the jump starter is at least 50% charged before attempting to jump start a vehicle.

Image: Visual guide demonstrating the four steps to jump start a vehicle using the UTRAI JS-1 PRO.

1. Connect Cables to Unit: Insert the blue plug of the smart booster cables into the jump start port on the UTRAI JS-1 PRO. Ensure it is fully seated.
2. Connect Clamps do baterije:
   • Povežite RED pozitivan (+) clamp na pozitivni (+) pol akumulatora vozila.
   • Povežite BLACK negativni (-) clamp na negativni (-) terminal akumulatora vozila.

   The indicator light on the smart booster cable will turn ZELENI if connected correctly. If an error occurs (e.g., reverse polarity), the cable will display an alert and sound a warning.
3. Pokreni vozilo: Kada zeleno svjetlo stalno svijetli, pokrenite motor vašeg vozila.
4. Uklonite Clamps: Nakon što se motor pokrene, odmah uklonite crni negativni (-) pol.amp, zatim crveni pozitivni (+) clamp from the vehicle battery. Finally, disconnect the smart booster cables from the jump starter unit.

If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. Do not attempt more than 3 consecutive jump starts.

Punjenje elektronskih uređaja

Image: The UTRAI JS-1 PRO demonstrating its 10W wireless charging capability and multiple USB output ports for charging various electronic devices like smartphones and tablets.

• Bežično punjenje: Place your Qi-compatible device on the wireless charging pad located on the top surface of the jump starter. The charging icon will appear on the LCD display.
• USB punjenje: Connect your device's USB charging cable to either of the two USB output ports on the jump starter.

Koristeći LED Lamp

Press and hold the power button for 3 seconds to turn on the LED flashlight. Press the power button repeatedly to cycle through the different modes:

• Flashlight (White Light)
• SOS Signal Light (White Light)
• Strobe Mode (White Light)
• Alternating Red and Blue Flashing Alarm Mode

Press and hold the power button again for 3 seconds to turn off the LED lamp.

Emergency Escape Hammer

The side of the jump starter is equipped with an emergency hammer. In case of an emergency requiring window breakage, use the pointed end to strike a corner of the window.

5. Održavanje i skladištenje

• Punjenje: Recharge the unit every 3-6 months to maintain optimal battery performance, even if not used.
• čišćenje: Obrišite uređaj suhom, mekom krpom. Ne koristite jake hemikalije ili abrazivna sredstva za čišćenje.
• Temperatura skladištenja: Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures. The operating and storage temperature range is -20°C to 60°C (-4°F to 140°F).
• Održavanje kablova: Inspect the booster cables and clamps for any damage before each use. Store them neatly in the provided case.

Image: The UTRAI JS-1 PRO demonstrating its ability to operate in extreme temperatures, from -20°C (-4°F) to 60°C (140°F).

6. Otkrivanje problema

7. Specifikacije

Slika: Detaljna view of the UTRAI JS-1 PRO unit, labeling its various components such as the compass, safety hammer, wireless charging area, power switch, LCD display, Type-C input, USB outputs, LED light, starting port, indicator lamp, and boost cable connection.

8. Garancija i podrška

The UTRAI JS-1 PRO Jump Starter comes with a 12-mjesečna garancija bez brige od datuma kupovine. Ova garancija pokriva proizvodne nedostatke i probleme nastale normalnom upotrebom.

For warranty claims, technical support, or any questions regarding your product, please contact UTRAI customer service through the retailer where the product was purchased or visit the official UTRAI webstranica za kontakt informacije.

Please have your purchase receipt and product model number (JS-1 PRO) available when contacting support.