MotionBlinds CM-12-BK 5-kanalni daljinski upravljač - uputstvo za upotrebu

Uvod

This manual provides comprehensive instructions for the setup, operation, and maintenance of your MotionBlinds CM-12-BK 5-Channel Remote Control. This remote is designed for operating and programming MotionBlinds roller shade motors, offering convenient control over your window coverings.

Image: The MotionBlinds CM-12-BK 5-Channel Remote Control shown next to its product packaging, highlighting its sleek black design.

Karakteristike proizvoda

• 5-kanalna kontrola: Operate up to five individual blinds or groups of blinds independently.
• Ergonomski dizajn: Udobno za držanje i jednostavno za korištenje.
• Wall Mounting Clip: Includes a clip for convenient wall storage.
• Optional Smart Home Connectivity: Compatible with Google Home and Amazon Alexa via the MotionBlinds Wi-Fi bridge (sold separately).

Sadržaj paketa

Molimo Vas da se uvjerite da su svi artikli prisutni u paketu:

• MotionBlinds CM-12-BK 5-Channel Remote Control
• Stezaljka za montažu na zid
• Korisnički priručnik (ovaj dokument)

Image: The MotionBlinds CM-12-BK Remote Control, its packaging, and the included wall mounting clip.

Podešavanje i uparivanje

Follow these steps to set up your remote control and pair it with your MotionBlinds motors.

1. Umetnite baterije: Open the battery compartment on the back of the remote and insert the required batteries (not included, typically AAA). Ensure correct polarity.
2. Prepare Motor for Pairing: Refer to your MotionBlinds motor's specific instructions to put it into pairing mode. This usually involves pressing a button on the motor itself.
3. Uparivanje daljinskog upravljača: While the motor is in pairing mode, press and hold the programming button on the remote control (often a small recessed button) until the motor responds (e.g., jogs slightly).
4. Assign Channel: Use the channel selection buttons on the remote to assign the motor to a specific channel (1-5).
5. Probni rad: Use the UP, DOWN, and STOP buttons to verify the motor responds correctly to the remote.

For detailed pairing instructions specific to your motor type, please consult the manual provided with your MotionBlinds motor.

Upravljanje daljinskim upravljačem

The CM-12-BK remote control allows for intuitive operation of your MotionBlinds.

• Odabir kanala: Koristite CH+ i CH- buttons to cycle through channels 1-5 or select the all-channel mode. The active channel is indicated by the LED display.
• Dugme GORE (⌃): Pritisnite za podizanje roletne.
• Dugme DOLJE (⌄): Pritisnite za spuštanje roletne.
• STOP/Favorite Button (■): Press to stop the blind at any position. A long press can set or recall a favorite position (refer to motor manual for favorite position programming).

For advanced functions such as setting limits or favorite positions, please refer to the specific instructions for your MotionBlinds motor.

Održavanje

Da biste osigurali dugotrajnost i optimalne performanse vašeg daljinskog upravljača:

• čišćenje: Obrišite daljinski upravljač mekom, suhom krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
• Zamjena baterije: Replace batteries when the remote's indicator light dims or operation becomes inconsistent. Always use the recommended battery type.
• Skladištenje: Daljinski upravljač čuvajte na suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.

Rješavanje problema

Specifikacije

Garancija i podrška

For warranty information and technical support, please contact Coulisse or MotionBlinds directly through their official webweb-mjesto ili kanale korisničke podrške. Sačuvajte račun kao dokaz o kupovini.

Za dodatne resurse i informacije o proizvodu, posjetite službenu stranicu MotionBlinds website.