AXIS D8208-R Industrijski 8-portni upravljani PoE++ prekidač Korisnički priručnik

1. Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Axis Communications D8208-R Industrial 8-Port Managed PoE++ Switch. This device is designed for robust industrial environments, offering reliable network connectivity and Power over Ethernet (PoE++) capabilities for connected devices. Please read this manual thoroughly before using the product to ensure proper and safe operation.

2. Sigurnosne informacije

Pridržavajte se sljedećih sigurnosnih mjera opreza kako biste spriječili oštećenje proizvoda i osigurali sigurnost korisnika:

• Izvor napajanja: Use only the specified power supply for this device. Ensure the power source meets the voltage i trenutni zahtjevi.
• Okruženje: Install the switch in an environment that complies with its operating temperature and humidity specifications. Avoid exposure to direct sunlight, excessive heat, moisture, or corrosive substances.
• ventilacija: Ensure adequate ventilation around the device to prevent overheating. Do not block ventilation openings.
• Instalacija: Instalaciju treba izvršiti kvalificirano osoblje u skladu s lokalnim električnim propisima i propisima.
• Održavanje: Ne pokušavajte sami otvarati ili servisirati uređaj. Za sve servisne radove obratite se kvalifikovanom servisnom osoblju.
• Kablovi: Use appropriate and certified cables for all connections.

3. Sadržaj paketa

Verify that all items are present in the package. If any item is missing or damaged, contact your supplier.

• AXIS D8208-R Industrial 8-Port Managed PoE++ Switch
• Vodič za brzu instalaciju
• Mounting Kit (e.g., DIN rail clip, screws)
• Terminal Block Connectors (for power input)

4. Proizvod je gotovview

The AXIS D8208-R is a robust industrial switch designed for demanding applications. It features multiple Ethernet ports with Power over Ethernet capabilities and advanced management features.

4.1 Raspored prednje ploče

Slika 1: Front view of the AXIS D8208-R Industrial Switch. This image displays the front panel of the switch, highlighting the various Ethernet ports, power input terminals, LED indicators, and the console port. Ports 1-4 are 1G PoE++ ports, ports 5-8 include 1G and 2.5G PoE++ capabilities, and ports 9-10 are 10G SFP+ ports.

Slika 2: Detaljan prednji dio view of the AXIS D8208-R Industrial Switch. This image provides a closer look at the port configuration and LED indicators. It shows the two 10G SFP+ uplink ports (9 and 10) at the bottom, the console port, and the reset button. The power input terminals are visible on the right side.

4.2 Components Description

• Ethernet portovi (1-4): 1 Gigabit Ethernet ports with PoE++ (802.3bt) support.
• Ethernet portovi (5-8): 1 Gigabit and 2.5 Gigabit Ethernet ports with PoE++ (802.3bt) support.
• 10G Ports (9-10): 10 Gigabit SFP+ uplink ports for high-speed connections.
• Power Input (P1, P2): Redundant power input terminals for enhanced reliability.
• Konzolni port: RJ45 port for local management and configuration via a serial connection.
• Dugme za resetiranje: Koristi se za resetovanje uređaja na fabričke postavke ili ponovno pokretanje.
• LED indikatori:
  • SYS: Indikator statusa sistema.
  • P1, P2: Power input status indicators.
  • ALM: Indikator alarma.
  • RM, RC: Redundancy Management / Redundancy Control indicators.

5. Podešavanje

5.1 Montaža

The AXIS D8208-R is designed for DIN rail mounting.

1. Attach the DIN rail clip (if not pre-installed) to the rear of the switch using the provided screws.
2. Hook the top edge of the DIN rail clip onto the DIN rail.
3. Push the bottom of the switch firmly towards the DIN rail until it clicks into place.
4. Ensure the switch is securely fastened to the DIN rail.

5.2 Priključak za napajanje

The switch supports redundant power inputs (P1 and P2) for increased reliability.

1. Ensure the power source is turned off before making any connections.
2. Connect the positive (+) and negative (-) wires from your DC power supply to the corresponding terminals on the provided terminal block connector for P1.
3. Insert the terminal block connector into the P1 power input port on the switch.
4. (Optional) For redundant power, repeat steps 2 and 3 for the P2 power input.
5. Once all connections are secure, turn on the power supply. The P1 and/or P2 LEDs should illuminate.

5.3 Mrežna veza

Connect network devices and uplink connections.

• Standard Devices: Connect your network devices (e.g., IP cameras, access points) to ports 1-8 using standard Ethernet cables. These ports will provide PoE++ power if the connected device supports it.
• Uplink: For high-speed uplink to your core network, insert compatible SFP+ transceivers into ports 9 and 10, then connect fiber optic cables.

5.4 Početna konfiguracija

Prekidač se može konfigurirati putem web-based interface or a command-line interface (CLI) through the console port.

• Web Interfejs: Connect a computer to any Ethernet port on the switch. The switch will typically obtain an IP address via DHCP or use a default static IP. Refer to the Quick Installation Guide for the default IP address and login credentials.
• Konzolni port: Connect a serial cable from your computer to the console port on the switch. Use a terminal emulation program (e.g., PuTTY) with the specified serial settings (e.g., 115200 baud, 8 data bits, no parity, 1 stop bit, no flow control) to access the CLI.

6. Operativni

6.1 LED indikatori

Monitor the LED indicators for the operational status of the switch.

6.2 Upravljanje i konfiguracija

The AXIS D8208-R is a managed switch, offering a range of configuration options for network optimization and security.

• Web-bazirani GUI: Pristupite prekidaču web interfejs putem standardnog web browser to configure VLANs, QoS, port settings, PoE management, security features, and more.
• CLI: For advanced users, the Command Line Interface provides granular control over all switch functions.
• SNMP: The switch supports SNMP for integration with network management systems.

7. Održavanje

7.1 Čišćenje

To maintain optimal performance, periodically clean the exterior of the switch.

• Uvjerite se da je napajanje isključeno prije čišćenja.
• Za brisanje vanjskih površina koristite meku, suhu krpu.
• Ne koristite tečna ili aerosolna sredstva za čišćenje, jer mogu oštetiti uređaj.
• Održavajte ventilacijske otvore čistim od prašine i otpada.

7.2 Ažuriranja firmvera

Redovno provjeravajte Axis Communications website for the latest firmware updates. Firmware updates can provide new features, performance improvements, and security enhancements.

• Preuzmite odgovarajući firmver file from the official Axis Communications support page for your model.
• Follow the instructions provided with the firmware update package for the correct update procedure, typically performed via the web interfejs.

8. Otkrivanje problema

If you encounter issues with your AXIS D8208-R switch, refer to the following common troubleshooting steps.

• Nema napajanja:
  • Check power cable connections to the switch and the power source.
  • Verify the power supply is functioning correctly and providing the correct voltage.
  • Ensure the P1/P2 LEDs are illuminated.
• Nema mrežne veze:
  • Check Ethernet cable connections for both the switch and the connected device.
  • Verify the link/activity LEDs on the respective port are active.
  • Provjerite je li povezani uređaj uključen i ispravno konfiguriran.
  • Check switch configuration (VLANs, port status) via the web interfejs ili CLI.
• PoE uređaj se ne uključuje:
  • Ensure the connected device is PoE compatible and within the switch's PoE budget.
  • Check the PoE status for the port in the switch's management interface.
  • Verify the Ethernet cable is a standard Cat5e/6 or higher.
• Pristup Web Interface Fails:
  • Confirm your computer's IP address is in the same subnet as the switch, or that DHCP is functioning.
  • Try accessing the switch via the console port to verify its IP configuration.
  • Obrišite keš memoriju preglednika ili pokušajte s drugim preglednikom.
• Vraćanje na tvorničke postavke: If issues persist and you need to restore default settings, press and hold the reset button for approximately 10-15 seconds until the SYS LED changes behavior, then release. Upozorenje: Ovo će izbrisati sve prilagođene konfiguracije.

9. Specifikacije

10. Garancija i podrška

For detailed warranty information, technical support, and additional resources, please visit the official Axis Communications website.

Webstranica: www.axis.com

Contact Axis Communications support for assistance with product installation, configuration, or troubleshooting beyond the scope of this manual.