Arbest Replacement Parts User Manual

Uvod

This user manual provides detailed instructions for the installation, maintenance, and troubleshooting of Arbest replacement parts for Proscenic 800T, 830T, 820S, and 830P Robot Vacuum Cleaners. These parts are designed to restore your robot vacuum's cleaning performance.

Kompatibilnost proizvoda

These replacement parts are compatible with the following robot vacuum cleaner models:

• Proscenic 800T
• Proscenic 820S
• Proscenic 820T
• Proscenic 830P
• Proscenic 830T
• Liectroux C30B
• Blaupunkt XBOOST

Please confirm your vacuum cleaner model before purchasing or installing this kit.

Sadržaj paketa

The 14-pack replacement kit typically includes a combination of the following components:

• Main Brushes (Roller Brush)
• HEPA filteri
• Side Brushes
• Vacuum Replacement Mop Pads
• Primary Filter (if applicable)

Slika 1: Gotovoview of the 14-pack replacement kit, including main brush, side brushes, HEPA filters, and mop pads.

Postavljanje i instalacija

Before installing any replacement parts, ensure your robot vacuum cleaner is powered off and unplugged from its charging base.

1. Installing the Main Brush (Roller Brush)

1. Okrenite robotski usisivač naopako.
2. Locate the main brush cover, usually secured by two tabs or screws. Open or remove the cover.
3. Remove the old main brush.
4. Insert the new main brush, ensuring the ends align with the slots in the vacuum.
5. Close or reattach the main brush cover.

Slika 2: The main roller brush, designed for effective debris collection.

2. Ugradnja bočnih četki

1. Okrenite robotski usisivač naopako.
2. Locate the side brushes. They are typically held in place by a single screw or a snap-on mechanism.
3. Remove the old side brushes.
4. Align the new side brush with the corresponding post on the vacuum and press down or secure with the screw. Ensure the brush rotates freely.

Slika 3: A pair of three-armed side brushes, essential for cleaning edges and corners.

3. Replacing HEPA Filters

1. Open the dustbin compartment on your robot vacuum.
2. Uklonite kantu za otpatke.
3. Locate the filter assembly within the dustbin. Remove the old HEPA filter.
4. Insert the new HEPA filter into the designated slot, ensuring it fits snugly to maintain proper filtration.
5. Reinsert the dustbin into the vacuum cleaner.

Slika 4: Two rectangular HEPA filters, crucial for trapping fine dust and allergens.

Slika 5: A single HEPA filter showing approximate dimensions: 93mm length, 60mm width, and 9mm thickness.

4. Attaching Mop Pads

1. Locate the mop pad attachment area on the underside of your robot vacuum, typically on the water tank or a dedicated mopping module.
2. Remove the old mop pad.
3. Attach the new mop pad, ensuring it is securely fastened, usually via Velcro or a sliding mechanism.

Slika 6: A single blue, semi-circular mop pad with a textured surface for effective wet cleaning.

Slika 7: A stack of multiple blue, semi-circular mop pads, indicating a supply for regular replacement.

Rad s novim dijelovima

Once all replacement parts are installed, you can resume normal operation of your robot vacuum cleaner. The new parts are designed to integrate seamlessly and restore optimal cleaning performance. Ensure the dustbin is empty and the water tank (if applicable) is filled before starting a cleaning cycle.

Održavanje

Regular maintenance of your robot vacuum's parts is crucial for sustained performance and longevity. The following guidelines are recommended:

• Glavna četka: Inspect and clean the main brush weekly. Remove any tangled hair or debris using the cleaning tool provided with your vacuum or a pair of scissors. Replace every 6-12 months, or sooner if visibly worn.
• Bočne četke: Check side brushes weekly for tangled hair or damage. If bristles are bent or curled, soak them in warm water for several minutes to help them regain their shape. Replace every 3-6 months, or if they become ineffective at sweeping debris.
• HEPA filteri: Tap filters gently over a trash can to remove loose dust after each cleaning cycle. Do not wash HEPA filters with water unless explicitly stated by your vacuum's manufacturer, as this can damage the filter material. Replace every 2-3 months, or more frequently if you have pets or allergies.
• Krpe za brisanje: Wash mop pads after each use. They are typically reusable and machine washable. Allow them to air dry completely before reattaching. Replace every 1-3 months, depending on usage and wear.

These replacement parts are washable and reusable where applicable. Consistent cleaning and timely replacement will ensure your robot vacuum operates at peak efficiency.

Rješavanje problema

If you encounter issues after replacing parts, refer to the following common troubleshooting tips:

Specifikacije

• Brand: Arbest
• Materijal: Plastika, silikon
• Ponovna upotreba: Reusable (for mop pads and some filters after cleaning)
• Broj komada: 14 (in the kit)
• Kompatibilnost: Proscenic 800T, 820S, 820T, 830P, 830T; Liectroux C30B; Blaupunkt XBOOST Robot Vacuum Cleaners

Korisnički servis i podrška

For any questions regarding these replacement parts or if you encounter issues not covered in this manual, please contact Arbest customer service. We are committed to providing high-quality products and efficient customer support.

Refer to your purchase documentation or the seller's information for specific contact details.