Remco KP5200KXW/O

Remco 6T70 6T75E (13-15) Gen 3 Transmission Banner Kit Instruction Manual

Model: KP5200KXW/O

Uvod

This instruction manual provides essential information for the proper installation, operation, and maintenance of your Remco 6T70 6T75E (13-15) Gen 3 Transmission Banner Kit. This kit is designed for automatic transmissions and includes an overhaul kit and clutches, providing the necessary components for a comprehensive transmission rebuild. Please read this manual thoroughly before beginning any work to ensure safe and correct procedures.

Šta je u kutiji

Your Remco Transmission Banner Kit includes the following components:

Remco 6T70 6T75E Gen 3 Transmission Banner Kit components including the box, various gaskets, seals, and clutch plates.

Image: Contents of the Remco 6T70 6T75E Gen 3 Transmission Banner Kit. The image displays the product packaging box, along with various components laid out, including a full set of gaskets, seals, and a collection of clutch and steel plates, essential for a complete transmission overhaul.

Karakteristike proizvoda

Kompatibilnost

This transmission banner kit is compatible with the following vehicle models and years. Please verify your vehicle's specifications before installation.

Model vozilaGodineMotor
Acadia2007 - 20173.6 /V6
Acadia2013 - 20153.6 /V6
Aura2007 - 20103.6 /V6
Captiva2013 - 20153.6 /V6
Enklava2008 - 20113.6 /V6
Enklava2013 - 20173.6 /V6
Ekvinocija2013 - 20153.6 /V6
Equinox Sport2008 - 20133.0, 3.6 /V6
G62007 - 20103.6 /V6
Impala2013 - 20172.5, 3.6 /L4, V6
LaCrosse2011 - 20113.6 /V6
LaCrosse2013 - 20153.6 /V6
Malibu2008 - 20113.5, 3.6 /V6
Malibu Classic2008 - 20083.5 /V6
Outlook2007 - 20103.6 /V6
SRX2010 - 20133.0, 3.6 /V6
SRX2013 - 20163.0, 3.6 /V6
Teren2010 - 20133.0, 3.6 /V6
Teren2013 - 20153.6 /V6
Torrent2008 - 20103.6 /V6
Traverse2009 - 20103.6 /V6
Traverse2013 - 20173.6 /V6
VUE2008 - 20093.6 /V6
XL-72009 - 20093.6 /V6
XTS2013 - 20173.6 /V6

Postavljanje i instalacija

Installing a transmission rebuild kit requires specialized knowledge and tools. It is highly recommended that installation be performed by a certified automotive technician. Improper installation can lead to severe damage to the transmission and vehicle.

Opći koraci (preporučuje se profesionalna instalacija):

  1. Priprema: Ensure the vehicle is safely lifted and secured. Drain transmission fluid and remove the transmission from the vehicle.
  2. Rastavljanje: Carefully disassemble the transmission, noting the order and orientation of all components. Refer to a specific service manual for your vehicle's transmission model.
  3. inspekcija: Inspect all hard parts for wear, damage, or scoring. Replace any worn components not included in this kit as necessary.
  4. Zamjena komponenti: Replace all seals, gaskets, O-rings, clutch plates, and steel plates with the new components from the Remco kit. Ensure all new parts are properly lubricated with clean transmission fluid before installation.
  5. Ponovno sastavljanje: Reassemble the transmission following the reverse order of disassembly. Pay close attention to torque specifications for all bolts.
  6. Instalacija: Reinstall the rebuilt transmission into the vehicle. Connect all lines, sensors, and electrical connectors.
  7. Punjenje tekućinom: Fill the transmission with the manufacturer-specified type and amount of new transmission fluid.
  8. Početna provjera: Perform initial checks for leaks and proper fluid levels.

Napomena: This kit provides the necessary components for a rebuild. Detailed step-by-step instructions for transmission disassembly and reassembly are specific to each transmission model and are typically found in a dedicated factory service manual for your vehicle.

Operativne smjernice

After a transmission rebuild, proper break-in and careful operation are crucial for longevity.

Održavanje

Regular maintenance is key to extending the life of your rebuilt transmission.

Rješavanje problema

This section provides general troubleshooting tips. For complex issues, consult a qualified technician.

ProblemMogući uzrokRješenje
Proklizavanje mjenjačaLow fluid level, worn clutches (unlikely with new kit), internal pressure issues.Check fluid level and add if low. If problem persists, professional diagnosis is required.
Harsh shiftingIncorrect fluid level, faulty sensor, valve body issue.Verify fluid level. Consult a technician for diagnostic scan and repair.
Tečnost curiImproperly seated gasket/seal, damaged pan, loose bolts.Inspect for source of leak. Tighten bolts to spec, replace gasket/seal if damaged.
Nema angažmana u opremiSeverely low fluid, internal mechanical failure.Check fluid level. If fluid is adequate, immediate professional inspection is needed.

Specifikacije

AtributDetalj
ProizvođačRemco
BrandRemco
Težina artikla2722 funte
Dimenzije proizvoda18 x 5 x 16 inča
Broj dijela proizvođačaKP5200KXW/O
ASINB0BVL747JG
Datum prve dostupnosti12. februara 2023

Garancija i podrška

Za informacije o garanciji i korisničku podršku pogledajte sljedeće:

Povezani dokumenti - KP5200KXW/O

Preview REMCO LP-HP023 Lube Pump Installation Instructions
Detailed installation guide for the REMCO LP-HP023 Lube Pump and Plumbing Hardware Pack, designed for specific Toyota transmissions including Tacoma, Tundra, FJ Cruiser, and 4Runner models.
Preview REMCO Towed Vehicle Lube Pump and Plumbing Installation Instructions
Detailed installation instructions for the REMCO Lube Pump and Plumbing Kit (LP-HP023) for compatible Toyota transmissions, including parts lists, step-by-step guidance, and fluid filling procedures.
Preview Toyota Avanza Service Packages and Maintenance Pricing
Official Toyota service packages and pricing for various Avanza models, including maintenance items, service intervals, and package options. Covers models F654, F653, F652, F651, F601, F602.
Preview 4L80E & 4L85E Automatic Transmission Parts Catalog
Comprehensive parts catalog for 4L80E and 4L85E automatic transmissions, including kits, filters, friction plates, steel plates, seals, bearings, and more, with part numbers and specifications.
Preview Sonnax komplet za pojačavanje pritiska u cijevima 6L80-LB1 za GM mjenjače - Vodič za instalaciju i tehnički vodič
Detaljna uputstva i tehničke informacije za Sonnax 6L80-LB1 komplet za pojačavanje pritiska u cjevovodu, dizajniran za poboljšanje performansi GM mjenjača. Uključuje korake instalacije, prednosti i povezane Sonnax proizvode.
Preview Korisnički priručnik i specifikacije matične ploče JGINYUE
Korisnički priručnik za matičnu ploču JGINYUE proizvođača ERYING TECHNOLOGY, s detaljnim opisom garancije, opisom sučelja, mjerama opreza prilikom instalacije i tehničkim specifikacijama.