1. Uvod
This manual provides essential information for the safe and effective operation of the Mxmoonant 800PRO Centrifuge Machine. Please read this manual thoroughly before operating the device and retain it for future reference. This benchtop centrifuge is designed for separating components of liquid mixtures based on density differences, commonly used in laboratory settings.
2. Sigurnosne mjere
Pridržavanje sljedećih sigurnosnih smjernica je ključno za sprječavanje ozljeda i osiguranje pravilnog funkcioniranja uređaja:
- Always operate the centrifuge on a stable, level surface.
- Ensure the power supply matches the device's voltage zahtjevi (110V).
- Do not open the centrifuge lid while the rotor is spinning. Wait until the rotor has completely stopped.
- Always balance tubes symmetrically in the rotor. Unbalanced loads can cause vibration, damage to the machine, or personal injury. If using a single sample, place a tube of clean water of equal weight opposite the sampTuba.
- Use only tubes that fit the rotor capacity (Length ≤ 118mm, Diameter ≤ 16mm, 15ml capacity).
- Keep the area around the centrifuge clear of obstructions.
- Disconnect the power cord before cleaning or maintenance.
- Do not operate the centrifuge if it shows signs of damage or malfunction.
3. Komponente proizvoda i višeview
The Mxmoonant 800PRO Centrifuge Machine features an intuitive design for ease of use.
Slika 3.1: Gotovoview of the Mxmoonant 800PRO Centrifuge Machine with labeled parts including Transparent Cover, LCD Display, Time Control, Speed Control, and Anti-slip Foot Pad.
- Prozirni poklopac: Allows observation of the rotor during operation and provides safety.
- LCD digitalni displej: Shows real-time information for time and speed settings.
- Dugme za kontrolu vremena: Adjusts the centrifugation duration (0-100 minutes).
- Dugme za kontrolu brzine: Adjusts the rotational speed (300-4000 RPM).
- Protivklizne podloge za stopala: Provide stability and reduce vibration during operation.
4. Specifikacije
| Parametar | Vrijednost |
|---|---|
| Vremenski opseg | 0-100 minuta |
| Raspon brzine | 300-4000 revolutions per minute (RPM) |
| Kapacitet | 6 x 15ml tube |
| Suitable Tube Dimensions | Length ≤ 118mm, Diameter ≤ 16mm |
| Voltage | 110V |
| Maksimalna relativna centrifugalna sila (RCF) | 1953xg |
| Snaga motora | 50W |
| Nivo buke | ≤50dB |
| Dimenzije paketa | 11 x 11 x 10.9 inča |
| Težina | 5.45 funti |
5. Podešavanje
- Raspakivanje: Carefully remove the centrifuge from its packaging. Inspect for any visible damage.
- plasman: Place the centrifuge on a flat, stable, and level surface away from direct sunlight, heat sources, or excessive moisture. Ensure adequate ventilation around the unit.
- Priključak za napajanje: Connect the power cord to the centrifuge and then to a grounded 110V electrical outlet.
- Pregled rotora: Ensure the rotor is securely installed and free from any debris.
- Tube Preparation and Balancing:
- Pripremite svoje samples in appropriate 15ml centrifuge tubes (Length ≤ 118mm, Diameter ≤ 16mm).
- It is critical to balance the tubes symmetrically in the rotor. If you are centrifuging fewer than six samples, ensure that the tubes are placed opposite each other to maintain balance. For example, if using one tube, place a counter-balancing tube filled with an equal volume of water directly opposite it. If using two tubes, place them opposite each other.
Image 5.1: Illustration of correct tube balancing for symmetrical operation. Tubes must be placed opposite each other to prevent imbalance.
Image 5.2: Diagram illustrating the maximum tube dimensions (Length ≤ 118mm, Diameter ≤ 16mm) suitable for the centrifuge.
6. Uputstvo za upotrebu
- Load Tubes: Open the transparent cover and carefully insert the balanced tubes into the rotor slots.
- Zatvori poklopac: Securely close the transparent cover. The centrifuge will not operate if the lid is not properly closed.
- Postavite vrijeme: Use the Time Control Knob to set the desired centrifugation duration (0-100 minutes). The set time will be displayed on the LCD screen.
- Podesite brzinu: Use the Speed Control Knob to set the desired rotational speed (300-4000 RPM). The set speed will be displayed on the LCD screen.
- Start Centrifugation: The centrifuge will begin operation once the settings are applied and the lid is closed. Monitor the LCD display for real-time operational status.
- Završetak: The centrifuge will automatically stop once the set time has elapsed. Wait for the rotor to come to a complete stop before opening the lid.
- Unload Tubes: Carefully open the lid and remove the centrifuged tubes.
Image 6.1: Adjusting the Time and Speed Control Knobs on the centrifuge.
Image 6.2: The LCD Digital Display provides real-time information on the set time and speed.
7. Održavanje
Regular maintenance ensures the longevity and optimal performance of your centrifuge.
- čišćenje: Wipe the exterior surfaces of the centrifuge with a soft, damp cloth. For spills inside the rotor chamber, use a mild disinfectant solution. Ensure no liquids enter the electrical components.
- Rotor Care: Periodically inspect the rotor for any signs of corrosion or damage. Clean the rotor and tube sleeves as needed.
- Skladištenje: When not in use, store the centrifuge in a clean, dry environment.
- Isključivanje struje: Always disconnect the power cord from the outlet when the centrifuge is not in use or during cleaning.
8. Otkrivanje problema
This section addresses common issues you might encounter with the centrifuge.
- Centrifuge does not start:
- Provjerite je li kabel za napajanje sigurno uključen u ispravnu utičnicu.
- Ensure the transparent cover is fully closed and latched.
- Excessive vibration or noise during operation:
- Immediately stop the centrifuge.
- Verify that the tubes are correctly balanced and symmetrically loaded in the rotor.
- Ensure the centrifuge is placed on a stable and level surface.
- Rotor does not reach set speed:
- Provjerite je li napajanje stabilno.
- Ensure the rotor is not overloaded beyond its capacity.
- Lid cannot be opened after operation:
- Ensure the rotor has completely stopped spinning. The lid lock mechanism will release only after the rotor is stationary.
If issues persist after attempting these troubleshooting steps, contact customer support.
9. Garancija i podrška
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Mxmoonant customer service. Keep your purchase receipt as proof of purchase for warranty claims.
