1. Uvod
Thank you for choosing the EKSA E1000WT Wireless Gaming Headset. This manual provides detailed instructions for setting up, operating, and maintaining your headset to ensure optimal performance and longevity. The E1000WT offers a stable 2.4GHz low-latency wireless connection, immersive 7.1 surround sound, an AI ENC noise-cancelling microphone for clear communication, vibrant RGB lighting, and an extended 36-hour battery life.
Image 1.1: The EKSA E1000WT Wireless Gaming Headset with its accompanying USB dongle.
2. Šta se nalazi u kutiji
Provjerite da li su sve komponente prisutne u vašem paketu:
- EKSA E1000WT Bežične slušalice za igre
- USB-A bežični adapter
- 3.5 mm audio kabl
- USB-C kabl za punjenje
- Torbica za nošenje
- Korisnički priručnik (ovaj dokument)
Image 2.1: All items included in the EKSA E1000WT package.
3. Vodič za postavljanje
3.1. Bežična veza (2.4 GHz)
- Insert the USB-A Wireless Dongle into an available USB port on your PC, PS4, or PS5 console.
- Power on the headset by pressing and holding the Power button for 3 seconds.
- The headset will automatically pair with the dongle. A solid indicator light on the headset signifies a successful connection.
Image 3.1: Demonstrates the low-latency 2.4GHz wireless connection for gaming.
3.2. Wired Connection (3.5mm)
For devices without a USB port or when the battery is low, use the 3.5mm audio cable:
- Connect one end of the 3.5mm audio cable to the 3.5mm jack on the headset.
- Connect the other end to the 3.5mm audio port on your device (e.g., mobile phone, Nintendo Switch, Xbox controller).
- Note: In wired mode, some features like RGB lighting and wireless controls may be unavailable or limited.
3.3. Kompatibilnost
The EKSA E1000WT headset is compatible with a wide range of devices:
- Wireless (2.4GHz Dongle): PC, PlayStation 4 (PS4), PlayStation 5 (PS5)
- Žični (3.5 mm audio kabel): Gaming Consoles (Xbox, Nintendo Switch), Computers (PC, Laptop), Mobile Devices (Smartphones, Tablets)
Image 3.2: Compatibility chart for the EKSA E1000WT headset.
4. Uputstvo za upotrebu
4.1. Kontrole na slušalicama
Slušalice imaju intuitivne kontrole koje se nalaze na ušnim školjkama:
Slika 4.1: Gotovoview of the headset's on-ear controls.
- Valjak za volumen: Scroll up to increase volume, scroll down to decrease volume.
- Dugme za mikrofon:
- Press and hold for 3 seconds: Toggle ENC (Environmental Noise Cancellation) on/off.
- Single click: Toggle microphone mute/unmute.
- Dugme za napajanje/višenamjensko dugme:
- Press and hold for 3 seconds: Power on/off the headset.
- Single click: Toggle 7.1 Surround Sound on/off.
- Double click: Toggle RGB lighting on/off.
- Indikator statusa: Displays connection and battery status.
- Tip-C priključak za punjenje: Za punjenje slušalica.
- 3.5mm Wired Mode Port: Za žičanu vezu.
- Indikator punjenja: Prikazuje status punjenja.
4.2 Surround zvuk
The headset features 7.1 surround sound for an immersive gaming experience. This feature is plug-and-play, requiring no driver installation. Simply connect the USB dongle to enjoy enhanced spatial audio on PC, PS4, and PS5.
Image 4.2: Visual representation of the 7.1 surround sound capability.
4.3. AI ENC Noise-Cancelling Microphone
The integrated AI ENC (Environmental Noise Cancellation) microphone utilizes advanced technology to eliminate up to 96% of background noise, ensuring clear voice communication with teammates without altering your natural voice.
Image 4.3: Illustration of the AI ENC microphone's noise reduction capabilities.
4.4. RGB osvjetljenje
The headset features customizable RGB lighting on the earcups. Double-click the Power button to toggle the RGB lights on or off, allowing you to match your gaming setup or preference.
Image 4.4: The headset showcasing its cool RGB lighting effects.
4.5. Trajanje baterije i punjenje
The EKSA E1000WT is equipped with a 1500mAh rechargeable battery, providing up to 36 hours of continuous wireless use. A full charge takes approximately 2.5 hours using the included USB-C charging cable.
Image 4.5: Battery life and charging duration details.
If the battery runs low during gameplay, you can instantly switch to wired mode using the 3.5mm audio cable to continue playing without interruption.
5. Održavanje
Pravilna njega osigurava dugotrajnost i performanse vaših slušalica:
- čišćenje: Koristite meku, suhu krpu za brisanje slušalica. Za slušalice, laganoamp cloth can be used, but ensure no moisture enters the speaker grilles or ports. Avoid harsh chemicals or abrasive materials.
- Skladištenje: Store the headset in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided carrying pouch for protection when not in use or during travel.
- Punjenje: Charge the headset regularly, even if not in frequent use, to maintain battery health. Avoid overcharging or completely draining the battery for extended periods.
- Održavanje kablova: Handle cables gently. Avoid sharp bends or excessive pulling, which can damage the internal wires.
6. Otkrivanje problema
If you encounter issues with your EKSA E1000WT headset, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| No sound from headset (Wireless) | Headset not powered on; Dongle not properly connected; Incorrect audio output setting on device; Headset not paired. | Ensure headset is powered on; Re-insert USB dongle; Check device's audio output settings and select 'EKSA E1000WT'; Power cycle headset and dongle to re-pair. |
| Mikrofon ne radi | Microphone muted; Incorrect input device selected; Microphone not properly connected (if detachable); ENC interfering. | Single click the Mic button to unmute; Check device's audio input settings and select 'EKSA E1000WT Microphone'; Ensure microphone is securely attached; Try toggling ENC off. |
| Poor audio quality / Disconnections (Wireless) | Interference from other 2.4GHz devices; Headset too far from dongle; Low battery. | Move away from other wireless devices; Ensure headset is within 15 meters (49 feet) of dongle; Charge the headset. |
| Slušalice se ne pune | Charging cable or port issue; Power source issue. | Ensure USB-C cable is fully inserted; Try a different USB port or power adapter; Check if the charging indicator light is on. |
| RGB svjetla ne rade | Lights turned off; Low battery. | Double-click the Power button to toggle RGB lights; Charge the headset. |
7. Specifikacije
| Feature | Opis |
|---|---|
| Naziv modela | E1000WT |
| Brand | EKSA |
| Tehnologija povezivanja | Wireless (2.4GHz Radio Frequency), Wired (3.5mm Jack) |
| Form Factor | Preko uha (cirkum-auralne) |
| Postavljanje uha | Preko uha |
| Boja | Srebrno crna |
| Impedansa | 32 oma |
| Frekvencijski opseg | 20 Hz - 20,000 Hz |
| Tehnologija mikrofona | Omnidirectional with AI ENC Noise Cancellation |
| Zvučna izolacija | Passive Noise Isolation (Over-Ear Design) |
| Kapacitet baterije | 1500 mAh (punjivo) |
| Trajanje baterije | Do 36 sati (bežično) |
| Vrijeme punjenja | Pribl. 2.5 sati |
| Kompatibilni uređaji | Gaming Consoles (PS4, PS5, Xbox, Switch), Computers, Mobile Devices |
| Posebne karakteristike | 7.1 Surround Sound, RGB Lighting, Detachable Cable, On-ear Controls |
| Materijal | Plastika |
| Nivo vodootpornosti | Vodootporan |
8. Garancija i podrška
8.1. Informacije o garanciji
EKSA products are designed and manufactured to the highest quality standards. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship from the date of purchase. Please refer to the warranty card included in your product packaging or visit the official EKSA webweb-mjesto za specifične uvjete garancije koji se primjenjuju u vašoj regiji.
8.2. Korisnička podrška
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact EKSA customer support through one of the following methods:
- Službeno Webstranica: Posjetite www.eksa.net za često postavljana pitanja, preuzimanje upravljačkih programa i kontakt informacije za podršku.
- Podrška putem e-pošte: Refer to the contact details provided on the EKSA website for email assistance.
When contacting support, please have your product model (E1000WT) and proof of purchase readily available.
