1. Uvod
This user manual provides essential information for the installation, operation, maintenance, and troubleshooting of your ZÜNDAPP Z802, Z80S, or Green 7.7 Ananda E-Bike Rear Hub Motor. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Sigurnosna uputstva
- Uvijek nosite odgovarajuću zaštitnu opremu, uključujući rukavice i zaštitu za oči, tokom instalacije.
- Ensure the bicycle is stable and secured before beginning any work on the motor or wheel.
- Disconnect the e-bike battery before performing any electrical connections or maintenance.
- Handle electrical components with care. Avoid exposing the motor or connectors to excessive moisture.
- Osigurajte da su svi priključci sigurni i pravilno izolirani kako biste spriječili kratki spoj.
- If you are unsure about any installation or maintenance step, consult a qualified bicycle mechanic.
3. Proizvod je gotovview
The ZÜNDAPP Ananda Rear Hub Motor is designed for Z802, Z80S, and Green 7.7 City Bike models. It provides pedal assistance for an enhanced cycling experience. Key features include:
- Integrated hub motor for rear wheel installation.
- Compatible with 26-inch and 28-inch wheels.
- Equipped with three Hall sensors and one speed sensor for precise control.
- Features a 9-pin plug for electrical connection.
- Designed for use with 6-hole disc brakes.
Slika 3.1: Gotovoview of the ZÜNDAPP Ananda Rear Hub Motor. This image displays the complete motor unit, including the central axle, mounting points, and the attached electrical cable with its connector.
4. Postavljanje i instalacija
Follow these steps for proper installation of the rear hub motor:
- Pripremite kotač: Ensure you have a compatible 26-inch or 28-inch rear wheel. The motor is designed to be integrated into the rear wheel.
- Motorna orijentacija: When installing the motor, ensure the cable guide is positioned on the left side of the bicycle (non-drive side). This is crucial for proper cable routing and protection.
- Disc Brake Installation: The motor is compatible with 6-hole disc brakes. Mount your disc brake rotor securely to the designated 6-hole pattern on the motor hub. Ensure all bolts are tightened to the manufacturer's specifications (typically 5 Nm for M5x8mm bolts).
- Električni priključak: Connect the motor's 9-pin plug to the corresponding connector on your e-bike's wiring harness. Ensure the connection is firm and fully seated.
- Provođenje kablova: Route the motor cable carefully along the bicycle frame, securing it with cable ties to prevent snagging or damage.
- Završne provjere: Before riding, verify that the wheel spins freely, the brake operates correctly, and all electrical connections are secure.
Figure 4.1: Motor cable exit and disc brake mounting. This view highlights the specific side for cable routing (left side) and the 6-hole pattern for attaching a disc brake rotor. Note the "important: use M5x8mm for disc fastening [5Nm]" text on the motor body.
Figure 4.2: 9-pin electrical connector. A detailed view of the motor's electrical connector, showing the nine pins that connect to the e-bike's control system.
5. Uputstvo za upotrebu
Once the motor is correctly installed and connected, its operation is typically controlled by the e-bike's main display and control unit. Refer to your specific ZÜNDAPP e-bike model's user manual for detailed instructions on:
- Turning the e-bike system on and off.
- Selecting pedal assist levels (e.g., Eco, Tour, Sport, Turbo).
- Monitoring battery level and speed.
- Using walk-assist mode (if available).
The motor provides assistance based on your pedaling input, detected by the integrated speed and Hall sensors. The level of assistance will vary depending on the selected mode and your pedaling effort.
6. Održavanje
Regular maintenance ensures the longevity and optimal performance of your motor:
- čišćenje: Keep the motor housing clean from dirt, mud, and debris. Use a damp krpom; izbjegavajte pranje pod visokim pritiskom direktno na motoru ili električnim spojevima.
- Inspekcija kablova: Periodically check the motor cable and its connectors for any signs of wear, cuts, or damage. Ensure connections remain secure.
- Zategnutost vijaka: Regularly inspect all mounting bolts, especially those for the disc brake rotor and wheel axle, to ensure they are tightened to the correct torque specifications.
- Zaštita životne sredine: While the motor is designed for outdoor use, avoid prolonged exposure to extreme weather conditions or submersion in water.
7. Otkrivanje problema
If you encounter issues with your motor, consider the following common troubleshooting steps:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Motor ne pruža pomoć | Battery low or disconnected, loose electrical connection, sensor issue, system error. | Check battery charge and connection. Inspect all cables and the 9-pin connector for secure fit. Restart the e-bike system. Consult your e-bike's main manual for error codes. |
| Neobična buka iz motora | Loose components, foreign object, internal motor issue. | Check for loose bolts or debris around the motor. If noise persists, discontinue use and consult a professional. |
| Intermittent power assistance | Loose sensor connection, damaged cable, intermittent electrical fault. | Inspect all sensor and power cables for damage or loose connections. Ensure the 9-pin connector is fully engaged. |
If troubleshooting steps do not resolve the issue, contact ZÜNDAPP customer support or a certified service center.
8. Specifikacije
| Feature | Specifikacija |
|---|---|
| Kompatibilnost modela | ZÜNDAPP Z802, Z80S, Green 7.7 City Bikes with Ananda system |
| Tip motora | Motor sa stražnjom glavčinom |
| Nazivna snaga | 250 W |
| Voltage | 36 V |
| Maksimalni obrtni moment | 31 Nm |
| Dužina osovine | 180 mm |
| Montažna širina | 110 mm |
| Kompatibilnost veličina kotača | 26 inch or 28 inch |
| Senzori | 3 Hall sensors, 1 speed sensor |
| Tip konektora | 9-pinski utikač |
| Kompatibilnost kočnica | 6-hole disc brakes |
| Cable Guide Position | Left side (non-drive side) |
9. Informacije o garanciji
For detailed warranty terms and conditions, please refer to the official ZÜNDAPP website or the documentation provided with your complete e-bike purchase. Keep your proof of purchase for warranty claims.
10. Podrška
If you require technical assistance, have questions regarding installation, or need to report a product issue, please contact ZÜNDAPP customer service through their official website or the contact information provided with your e-bike.
For further information, you may visit the official ZÜNDAPP webstranica: www.zuendapp.de (Napomena: Ovo je rezervirani link, molimo provjerite stvarnu podršku URL).
