LOKITHOR J3250 PRO Uputstvo za upotrebu za Jump Starter

1. Uvod

The LOKITHOR J3250 PRO is a powerful and versatile LiFePO4 jump starter designed to provide reliable starting power for vehicles with up to 9.5L gasoline and 7.5L diesel engines. It also functions as a portable power bank and features an integrated LED flashlight. This manual provides essential information for safe and effective use, setup, operation, maintenance, and troubleshooting of your device.

2. Sigurnosne informacije

Please read and understand all safety instructions before operating the LOKITHOR J3250 PRO. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Zaštita očiju: Uvijek nosite zaštitne naočale pri radu s baterijama.
• ventilacija: Koristite uređaj u dobro provetrenom prostoru.
• djeca: Držite uređaj van domašaja djece.
• kratki spojevi: Nemojte dozvoliti crveni i crni clamps to touch each other or the same metal object.
• Obrnuti polaritet: Ensure correct polarity connection (red to positive, black to negative) to avoid damage. The device includes reverse-polarity protection.
• Vlaga: Do not immerse the device in water. While it has an IP65 rating for water and dust resistance, it is not designed for submersion.
• Šteta: Do not use the device if it is damaged. Contact customer support for assistance.
• temperatura: Do not expose the device to extreme heat or fire. Store within recommended temperature ranges.

The LOKITHOR J3250 PRO incorporates 10 safety protection technologies, including spark-proof, reverse-polarity, short-circuit, reverse-charge, low-temperature, high-temperature, over-voltage, over-load, over-charge, and over-current protection.

3. Proizvod je gotovview

3.1 Šta se nalazi u kutiji

• LOKITHOR J3250 PRO Jump Starter Unit
• Jumper Starter Clamps
• USB-A na USB-C kabel
• USB-C na USB-C kabl
• 12V adapter
• Accessories Storage Bag
• Uputstvo za upotrebu

Included components with the LOKITHOR J3250 PRO Jump Starter.

3.2 Ključne karakteristike

• High Starting Current: Pruža 3250 Amp peak current for reliable vehicle starting.
• Kompatibilnost motora: Suitable for gasoline engines up to 9.5 liters and diesel engines up to 7.5 liters.
• Tehnologija LiFePO4 baterije: Offers over 2000 cycles at 100% depth of discharge, providing extended lifespan and enhanced chemical stability compared to traditional lead-acid or lithium-ion batteries.
• Napredna sigurnost: Features 10 types of protection, including spark-proof, mistake-proof, and reverse-polarity protection.
• Brzo punjenje u dva smjera od 100 W: Recharges the unit in approximately 60 minutes and can provide power output for USB-C devices.
• ConnectMax Technology: Automatically detects clamp connection impedance to optimize starting efficiency.
• Prijenosni Power Bank: Provides 74.24Wh capacity with USB-A and USB-C outputs for charging phones, tablets, laptops, and other devices.
• 400-Lumen LED Flashlight: Includes multiple modes (constant, strobe, SOS) for emergency lighting.
• Izdržljiv dizajn: IP65 waterproof and dustproof rating, designed to operate in temperatures from -4°F to 140°F (-20°C to 60°C).
• Dugo vrijeme pripravnosti: Maintains charge for up to 42 months (1260 days) with minimal self-discharge.

The J3250 PRO provides 3250A peak current, suitable for large engines.

The device features an IP65 rating for water and dust resistance.

4. Podešavanje i punjenje

4.1 Početno punjenje

Before first use, fully charge the LOKITHOR J3250 PRO. This ensures optimal performance and extends battery life.

1. Connect the provided USB-C to USB-C cable to the jump starter's USB-C input port.
2. Connect the other end of the USB-C cable to a 100W Power Delivery (PD) compatible wall charger (not included) or use the included 12V adapter.
3. The display will show charging progress. A full charge typically takes about 60 minutes with a 100W PD charger.

4.2 Recharging the Device

It is recommended to recharge the jump starter after each use. If not used regularly, recharge the unit every 3-6 months to maintain battery health and readiness.

5. Uputstvo za upotrebu

5.1 Jump Starting a Vehicle (Normal Mode)

Use Normal Mode for vehicles with a partially discharged battery.

1. Priložiti Clamps: Spojite crveni (+) clamp to the positive terminal of the vehicle battery. Connect the black (-) clamp na negativni pol akumulatora vozila.
2. Uključeno: Turn on the LOKITHOR J3250 PRO. The device will automatically detect the battery and prepare for jump starting.
3. Pokreni vozilo: Pokrenite svoje vozilo.
4. Isključivanje i odvajanje: Once the vehicle starts, power off the jump starter and immediately disconnect the clamps iz akumulatora vozila.

Steps for jump starting a vehicle using Normal Mode.

5.2 Jump Starting a Vehicle (Boost Mode)

Use Boost Mode for completely dead batteries where Normal Mode does not initiate a jump start.

1. Pričvrstite crveni Clamp: Spojite crveni (+) clamp na pozitivni pol akumulatora vozila.
2. Aktiviraj pojačanje: Long press the 'Boost' button on the jump starter for more than 5 seconds. The display will indicate Boost Mode is active.
3. Pričvrstite crni Clamp: Spojite crni (-) clamp na negativni pol akumulatora vozila.
4. Pokreni vozilo: Start your vehicle within 30 seconds of activating Boost Mode.
5. Isključivanje i odvajanje: Once the vehicle starts, power off the jump starter and immediately disconnect the clamps iz akumulatora vozila.

Steps for jump starting a vehicle using Boost Mode for completely dead batteries.

5.3 Korištenje kao prijenosne power bank baterije

The J3250 PRO can charge various electronic devices.

• Connect your device to the USB-A output port (12V/1.5A, 18W QC) or the USB-C output port (20V/5A, 100W PD).
• The device will automatically begin charging.

The J3250 PRO can charge multiple electronic devices.

5.4 Korištenje LED svjetiljke

The integrated 400-lumen LED flashlight provides illumination and emergency signaling.

• Press the flashlight button once for constant illumination.
• Press again to cycle through Strobe and SOS modes.
• Pritisnite četvrti put da isključite baterijsku lampu.

The 400-lumen LED flashlight offers multiple modes for various situations.

6. Održavanje

• Redovno punite: To prolong battery life, recharge the unit after each use. If stored, recharge every 3-6 months.
• Skladištenje: Store the jump starter in a cool, dry place, away from direct sunlight and moisture. The device has a standby time of up to 42 months when fully charged.
• čišćenje: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Clamp njega: Osigurajte clamps are clean and free of corrosion for optimal connection.

The J3250 PRO maintains charge for up to 42 months in standby.

7. Otkrivanje problema

If you encounter issues with your LOKITHOR J3250 PRO, refer to the following common troubleshooting steps:

• Uređaj se ne uključuje: Ensure the device is charged. If the battery is completely depleted, charge it for at least 15-30 minutes before attempting to power on.
• Vehicle Not Starting (Normal Mode):
  • Provjerite da li je clampsu sigurno spojeni na ispravne terminale baterije (crvena na pozitivan, crna na negativan).
  • Provjerite da li su terminali akumulatora vozila čisti i bez korozije.
  • If the vehicle battery is completely dead, try using Boost Mode.
• Vehicle Not Starting (Boost Mode): Ensure the Boost Mode was activated correctly (long press for 5 seconds) and the vehicle was started within 30 seconds.
• Clamps Sparking: This is normal if the clamps are connected incorrectly or if there is a poor connection. Ensure proper connection and clean terminals. The device has spark-proof protection.
• Pregrijavanje uređaja: The device has high-temperature protection. If it feels excessively hot, disconnect it and allow it to cool down before further use.
• Problemi s punjenjem: Ensure the charging cable and adapter are functioning correctly and are compatible with 100W PD for fast charging.

If problems persist, please contact LOKITHOR customer support.

8. Specifikacije

The J3250 PRO is designed to operate in a wide range of temperatures.

9. Garancija i podrška

LOKITHOR products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the official LOKITHOR webweb-mjesto ili direktno kontaktirajte njihovu službu za korisnike. Sačuvajte račun kao dokaz o kupovini za reklamacije u slučaju garancije.

If you have any after-sales questions, please feel free to contact us.