Einhell TE-MG 350 EQ Multi Tool User Manual

1. Uvod

The Einhell TE-MG 350 EQ Multi Tool is a versatile and powerful device designed for a wide range of tasks including sanding, cutting, and removing tile joints. Its robust 350 W motor, electronic speed control, and quick-release system make it an indispensable tool for both experienced DIY enthusiasts and professionals. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your multi-tool.

Figure 1: The Einhell TE-MG 350 EQ Multi Tool, its carrying case, and all included accessories.

2. Sigurnosna uputstva

Always observe the following safety precautions to prevent injury and damage to the tool.

• Pročitajte priručnik: Familiarize yourself with all instructions and warnings before operating the tool.
• Nosite ličnu zaštitnu opremu (LZO): Always wear safety glasses, hearing protection, and a dust mask when operating the multi-tool. Gloves are recommended.
• Radna oblast: Keep your work area clean, well-lit, and free of clutter. Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• električna sigurnost: Ensure the power supply matches the tool's requirements. Do not expose power tools to rain or wet conditions. Avoid body contact with earthed or grounded surfaces.
• Osigurajte radni komad: Uvijek čvrsto pričvrstite radni komad kako biste spriječili njegovo pomicanje tokom rada.
• Accessory Changes: Isključite alat iz izvora napajanja prije bilo kakvog podešavanja, promjene pribora ili skladištenja alata.
• Maintain Tool: Keep cutting tools sharp and clean. Follow lubrication instructions.
• Izbjegavajte preterivanje: Održavajte pravilan položaj i ravnotežu u svakom trenutku.

3. Sadržaj paketa

Prilikom raspakivanja, provjerite da li su sve dolje navedene stavke prisutne i da nisu oštećene:

• Einhell TE-MG 350 EQ Multi Tool
• Carrying Case (E-Box S35/33)
• 1 x Triangular Sanding Pad
• 9 x Sanding Sheets (3 x P60, 3 x P80, 3 x P120)
• 1 x strugač
• 1 x Plunge Blade for wood and plastic
• 1 x BIM Plunge Blade for metal
• 1 x Segment Blade for wood, plastic, and soft metals (high-speed steel)
• 1 x Diamond Segment Blade for tile joints
• 1 x Adapter for vacuum cleaner

Figure 2: The multi-tool and its red carrying case, with accessories neatly arranged.

Slika 3: Detaljan view of the various accessories included with the multi-tool, such as sanding pads, blades, and scrapers.

4. Podešavanje

4.1 Pričvršćivanje dodatne opreme

The Einhell TE-MG 350 EQ features a quick-release system for fast and tool-free accessory changes. The magnetic tool holder offers 12 different settings for optimal positioning.

1. Provjerite je li alat isključen iz izvora napajanja.
2. Open the quick-release lever on the tool head.
3. Align the desired accessory (blade, sanding pad, scraper) with the tool holder, ensuring it seats correctly.
4. Close the quick-release lever firmly until it locks into place.

Figure 4: Hands demonstrating the quick and tool-free attachment of a diamond segment blade to the multi-tool.

4.2 Spajanje usisavanja prašine

For cleaner work and to prolong the life of your accessories, connect a vacuum cleaner to the integrated dust extraction system.

1. Attach the provided adapter to the dust extraction port on the multi-tool.
2. Spojite odgovarajuće crijevo usisavača na adapter.
3. Uvjerite se da je veza sigurna prije rada.

Figure 5: An illustration showing the dust extraction port on the multi-tool and the direction of airflow for efficient dust removal.

5. Uputstvo za upotrebu

5.1 Uključivanje/isključivanje

To turn the tool on, slide the power switch to the 'ON' position. To turn it off, slide the switch to the 'OFF' position. The switch also features a locking function for continuous operation during extended tasks.

5.2 Variable Oscillation Speed

The electronic dimmer allows you to adjust the oscillation speed from 22,000 to 40,000 oscillations per minute, optimizing performance for different materials and applications. Use a lower speed for delicate work or softer materials and a higher speed for aggressive removal or harder materials.

Figure 6: A close-up of the variable speed control dial on the multi-tool, showing settings from 1 to 6.

5.3 Aplikacije

The TE-MG 350 EQ is suitable for:

• Brušenje: Use the triangular sanding pad with appropriate grit sanding sheets for wood, plastic, or metal.
• rezanje: Utilize plunge blades for precise cuts in wood, plastic, or metal, and segment blades for longer cuts or specific materials.
• Tile Joint Removal: The diamond segment blade is ideal for efficiently removing old grout from tile joints.
• struganje: The scraper attachment can be used for removing residues like old adhesive, paint, or sealant.

Figure 7: A person using the Einhell multi-tool to remove grout from wall tiles, demonstrating its application.

Figure 8: The multi-tool fitted with a scraper blade, positioned as if ready to remove material from a surface.

5.4 Integrisano LED svjetlo

The built-in LED light illuminates the workspace, providing perfect visibility, especially in dimly lit areas.

6. Održavanje

6.1 Čišćenje

Regularly clean the tool to ensure optimal performance and longevity. Disconnect from power before cleaning.

• Obrišite eksterijer oglasomamp tkanina. Nemojte koristiti jake hemikalije ili abrazivna sredstva za čišćenje.
• Clear any dust or debris from the ventilation slots to prevent overheating.
• Clean the accessory holder to ensure proper seating of attachments.

6.2 Accessory Inspection

Inspect accessories before each use. Replace worn, dull, or damaged blades and sanding sheets to maintain cutting efficiency and safety.

6.3 Skladištenje

Store the multi-tool and its accessories in the provided carrying case in a dry, secure location, out of reach of children.

7. Otkrivanje problema

If you encounter issues with your Einhell TE-MG 350 EQ Multi Tool, refer to the following common solutions:

• Alat se ne pokreće: Check if the tool is properly plugged into a functioning power outlet. Ensure the power switch is fully engaged.
• Poor Performance/Excessive Vibration: Verify that the accessory is correctly installed and securely fastened. Check if the accessory is dull or damaged and replace if necessary. Adjust the oscillation speed for the material being worked on.
• pregrijavanje: Ensure ventilation slots are clear of debris. Avoid continuous heavy-duty use without breaks.

For issues not resolved by these steps, please contact Einhell customer support.

8. Specifikacije

9. Garancija i podrška

For warranty information, technical support, or to purchase replacement parts and accessories, please visit the official Einhell webweb-mjesto ili kontaktirajte njihovu službu za korisnike. Sačuvajte račun kao dokaz o kupovini.