Okin 2-Pin Y Splitter Cable Power Cord Replacement (4.6ft & 0.66ft)

1. Proizvod je gotovview

The Okin 2-Pin Y Splitter Cable is designed to provide a multi-functional power solution for electric furniture. This cable allows a single power supply transformer to power two motors simultaneously, commonly found in electric recliners and lift chairs. It features a 2-pin hybrid plug (one round, one flat) for connection to the transformer and two 2-pin sockets with clips for motor attachment. This product is ideal for replacing damaged cords or expanding existing power systems.

Image 1: The Okin 2-Pin Y Splitter Cable, showing the main cable and two branch cables.

2. Sigurnosne informacije

Always disconnect power from the main power supply before installing or removing the splitter cable.
Ensure all connections are secure and free from damage before restoring power.
Do not expose the cable to water or excessive moisture.
Avoid placing heavy objects on the cable or bending it sharply, as this can cause damage.
If the cable appears damaged, discontinue use immediately and replace it.

3. Sadržaj paketa

1 x Okin 2-Pin Y Splitter Cable Power Cord (Main cable: 4.6 ft, Branch cables: 55 inches and 8 inches)

Note: Motor and transformer are not included.

4. Postavljanje i instalacija

Follow these steps to correctly install your Okin Y Splitter Cable:

Isključite napajanje: Ensure the electric recliner or lift chair is unplugged from the wall outlet to prevent electrical hazards.
Identifikujte veze: Locate the power supply transformer and the motor connection ports on your electric furniture.
Povežite se s transformatorom: Take the 2-pin hybrid plug (one round, one flat) of the Okin Y splitter cable and securely connect it to the output port of your power supply transformer.
Connect to Motors: Attach each of the two 2-pin sockets with clips from the Y splitter cable to the corresponding input ports on your recliner motors. Ensure the clips are fully engaged for a secure connection.
Organizirajte kablove: Route the cables neatly to avoid pinching or tripping hazards.
Vrati snagu: Once all connections are secure, plug the electric recliner or lift chair back into the wall outlet.

Diagram showing Okin Y Splitter Cable connections to transformer and motors

Image 2: Connection diagram illustrating how to connect the Y splitter cable to a power supply transformer and two recliner motors.

5. Uputstvo za upotrebu

Once the Okin Y Splitter Cable is correctly installed, the operation of your electric recliner or lift chair remains unchanged. Use the existing controls (hand remote or integrated buttons) of your furniture to operate the motors as usual. The splitter cable simply facilitates power distribution from a single source to two motors.

6. Održavanje

čišćenje: Wipe the cable with a dry, soft cloth. Do not use liquid cleaners.
inspekcija: Periodically inspect the cable for any signs of wear, cuts, or damage to the insulation or connectors.
Skladištenje: If storing the cable, coil it loosely. Avoid tight coiling or kinking, which can damage the internal wires.
Okruženje: Keep the cable away from extreme temperatures, direct sunlight, and areas where it might be chewed by pets or damaged by furniture movement.

7. Otkrivanje problema

Problem	Mogući uzrok	Rješenje
No power to either motor.	Main power supply unplugged. Faulty power supply transformer. Y splitter cable not securely connected to transformer. Damaged Y splitter cable.	Check wall outlet and main power cord. Test transformer with a single motor if possible, or replace. Ensure the 2-pin hybrid plug is fully inserted into the transformer. Inspect cable for visible damage; replace if necessary.
Only one motor receives power.	Loose connection to the non-working motor. Neispravan motor. Damage to one branch of the Y splitter cable.	Check the 2-pin socket connection to the non-working motor. Test the motor directly if possible, or swap connections to isolate the issue. Inspect the specific branch cable for damage; replace the Y splitter if damaged.

8. Specifikacije

Broj modela: R5.216.01.024D
Main Cable Length: 1.4 metara (4.6 stopa)
Branch Cable Lengths: 140 cm (55 inča) i 20 cm (8 inča)
Connector Type (Input): 2-pin hybrid plug (one round, one flat)
Connector Type (Output): Two 2-pin sockets with clips
Materijal: High-quality pure copper core
Težina artikla: Otprilike 2.89 unci
Dimenzije paketa: 8.7 x 6.34 x 1.14 inča

9. Kompatibilnost

This Okin 2-Pin Y Splitter Cable is compatible with a wide range of electric recliners and lift chairs that utilize a 2-pin hybrid connection for their power supply and motors. Known compatible brands include:

Okin
Dewert
Lazyboy
Ponos
Catnapper
Limoss

Always verify the plug design of your existing components to ensure compatibility before purchase.

10. Garancija i podrška

For any questions, concerns, or support regarding your Okin 2-Pin Y Splitter Cable, please contact Okin customer service. Refer to your product packaging or the Okin official webstranicu za najnovije kontakt informacije i detalje o garanciji.

	Upute za sastavljanje YB2213 Power Lift Recliner stolice Detaljan vodič za sastavljanje YB2213 fotelje s električnim podizanjem, uključujući sadržaj paketa, korake spajanja i upute za ožičenje napajanja i daljinskih upravljača. Ima funkcije grijanja i masaže.
	OKIN HSW306 Vodič za zamjenu daljinskog upravljača sa 5-pinskog na 7-pinski konektor Detaljne upute za zamjenu OKIN HSW306 daljinskog upravljača za naslonjač s 5 pinova s 7-pinskim modelom, uključujući premosnicu ožičenja, korake instalacije i preporučenu dodatnu opremu.
	Vodič za rješavanje problema s Okin Systemsima: Popravak i održavanje lift stolice Sveobuhvatni vodič za rješavanje problema za Okin sisteme koji se koriste u podiznim stolicama. Naučite dijagnosticirati i rješavati uobičajene probleme s ručnim komandama, transformatorima, motorima i maticama vretena. Uključuje savjete za instalaciju.
	OKIN RF.31.24.01 Uputstvo za upotrebu sistema daljinskog upravljanja Sveobuhvatno korisničko uputstvo za OKIN RF.31.24.01 sistem daljinskog upravljanja sa 22 tastera, koje detaljno opisuje funkcije tastera, postupke podešavanja položaja i komponente sistema za podesive krevete.
	Upute za upotrebu i funkcije kontrolne kutije OKIN CB3433A Ovaj dokument pruža detaljne upute za korištenje OKIN CB3433A kontrolne kutije, komponente za podesive sisteme namještaja koju proizvodi OKIN, kompanija Phoenix Mecano. U njemu se opisuje električna konfiguracija, interfejs kontrolne kutije i objašnjava rad različitih aktuatora (glava, stopala, lumbalni dio), masažnih motora i RGB rasvjete ispod kreveta. Vodič također pokriva LED indikatore, postupke uparivanja, opcije povezivanja (SYNC, USB, UART), zahtjeve za napajanje i uključuje regulatorna upozorenja FCC i ISED RSS. Napisao Jarek iz Odjela za istraživanje i razvoj.
	OKIN S2-2# Dvostruki kolonski sistem: Uputstvo za upotrebu i uputstvo za upotrebu Sveobuhvatni vodič za OKIN S2-2# sistem sa dva stuba. Naučite kako da koristite, postavite ograničenja, otklonite greške i shvatite tehničke specifikacije za vaš sto sa podesivom visinom.

Okin R5.216.01.024D