1. Važne informacije o sigurnosti
Molimo vas da pročitate i razumjete sva uputstva prije početka sastavljanja i upotrebe. Sačuvajte ovaj priručnik za buduću upotrebu.
- Be cautious when using the trundle bed to avoid pinching fingers.
- Ensure the mattress on the upper bunk is securely fastened to prevent shifting.
- Do not exceed the weight limit of 250 lbs on the upper bunk.
- The bottom bunk has a weight capacity of 450 lbs.
- The trundle bed has a weight capacity of 300 lbs.
- Recommended mattress thickness: Upper bed: 6 inches; Bottom bed: 6-8 inches; Trundle: 6 inches.
- Always use the provided guardrails on the upper bunk.
- Periodically check all connections and tighten hardware as needed.
2. Proizvod je gotovview
The Polibi Twin-Over-Full Wooden Bunk Bed with Trundle is designed to provide versatile sleeping arrangements. It features a twin-size upper bunk, a full-size lower bunk, and a pull-out twin-size trundle bed. The unit can also be separated into two individual beds (one twin loft bed and one full-size bed).

Slika 2.1: Assembled Polibi Twin-Over-Full Bunk Bed with Trundle. This image shows the complete bunk bed unit with the trundle bed pulled out, ready for use.

Slika 2.2: Front view of the Polibi Bunk Bed, showcasing the ladder and guardrails.
3. Upute za montažu (Postavljanje)
Assembly is required. It is recommended that two adults assemble this product. Ensure all parts are present before beginning. Do not use power tools for assembly as this may overtighten and damage the wood.
3.1. Sadržaj paketa
Verify that all components are included in your package. Refer to the parts list provided in your packaging for exact quantities. Typical components include:
- Bed frames (headboards, footboards, side rails)
- Komponente ljestvi
- Zaštitne ograde
- Slat kits for upper, lower, and trundle beds
- Trundle bed frame and casters
- Hardware pack (bolts, nuts, washers, Allen wrench)
3.2. Sastavljanje korak po korak
- Raspakujte i organizujte: Carefully unpack all components and lay them out on a clean, soft surface (e.g., a rug or blanket) to prevent scratching. Group similar parts and hardware.
- Assemble Trundle Bed: Begin by assembling the trundle bed frame. Attach the casters to the trundle frame according to the instructions in your specific parts diagram. Insert the trundle slats.
- Assemble Lower Bed: Connect the side rails to the headboard and footboard of the full-size lower bed using the provided hardware. Ensure all connections are secure but do not fully tighten until all parts are aligned. Insert the full-size bed slats.
- Assemble Upper Bed: Connect the side rails to the headboard and footboard of the twin-size upper bed. Attach the guardrails to the upper bed frame. Insert the twin-size bed slats.
- Pričvrstite ljestve: Securely attach the ladder to the designated side of the upper bunk, ensuring it is stable and safe for climbing.
- Stack Beds: Carefully lift the assembled upper twin bed and place it onto the assembled lower full bed, aligning the connecting posts. Secure the upper bed to the lower bed using the provided hardware.
- Završno zatezanje: Once all components are assembled and aligned, systematically tighten all bolts and screws. Do not overtighten.
- Umetni Trundle: Slide the assembled trundle bed under the lower bunk.

Slika 3.1: Detailed dimensions of the Polibi Bunk Bed and Trundle. This diagram provides measurements for each section, crucial for assembly and space planning.

Slika 3.2: Eksplodirao view of the Polibi Bunk Bed components, showing the separate trundle unit and bed frames before assembly.
4. Uputstvo za upotrebu
4.1. Using the Bunk Bed
- Gornji krevet: Access the upper bunk using the integrated ladder. Always ensure the guardrails are properly installed and secure.
- Donji krevet: The full-size lower bunk provides ampprostor za spavanje.
4.2. Korištenje kreveta na izvlačenje
- To use the trundle bed, gently pull it out from under the lower bunk. The casters allow for easy movement.
- To store, push the trundle bed back under the lower bunk until it is fully recessed.

Slika 4.1: The trundle bed fully extended from beneath the lower bunk, demonstrating its functionality.
4.3. Converting to Two Separate Beds
This bunk bed can be converted into two individual beds. This process requires partial disassembly and reassembly.
- rastaviti: Carefully remove the hardware connecting the upper bunk to the lower bunk. Detach the ladder and guardrails from the upper bunk.
- Odvojeno: Gently lift the upper twin bed off the lower full bed.
- Reassemble (if needed): If the upper bed is to be used as a standalone twin bed, ensure all necessary end panels and supports are attached to form a complete bed frame. The lower bed will function as a standalone full bed.

Slika 4.2: The Polibi Bunk Bed separated into a twin bed and a full bed, demonstrating its convertible feature.
5. Održavanje i njega
- čišćenje: Obrišite površine mekom, damp krpom. Izbjegavajte jake hemikalije ili abrazivna sredstva za čišćenje koja mogu oštetiti završnu obradu.
- Provjera hardvera: Periodically inspect all bolts, screws, and connections to ensure they are tight. Re-tighten as necessary to maintain structural integrity and safety.
- Njega drva: Zaštitite drvo od ekstremnih temperaturnih promjena i direktne sunčeve svjetlosti kako biste spriječili savijanje ili blijeđenje.
- Nosač madraca: Ensure slats are evenly spaced and securely in place to provide proper mattress support.
6. Otkrivanje problema
- Krevet se ljulja:
- Check all bolts and screws. Ensure they are fully tightened.
- Provjerite da li su sve komponente pravilno sastavljene prema uputama.
- Trundle bed does not slide smoothly:
- Inspect the casters for any obstructions or damage.
- Ensure the floor surface is clear and even.
- dijelovi koji nedostaju:
- Refer to the parts list in your packaging. Contact customer support with the specific part number for assistance.
7. Specifikacije
| Feature | Detalj |
|---|---|
| Brand | polybi |
| Model | Twin-Over-Full Bunk Bed with Trundle |
| Boja | Bijelo |
| Dimenzije proizvoda | 78.7 cm D x 96.5 cm Š x 62.3 cm V |
| Nosivost gornjeg kreveta | 250 lbs |
| Nosivost donjeg kreveta | 450 lbs |
| Trundle Weight Capacity | 300 lbs |
| Recommended Upper Mattress Thickness | 6 inča |
| Recommended Bottom Mattress Thickness | 6-8 inča |
| Preporučena debljina madraca na izvlačenje | 6 inča |
| Materijal | Solid Pine Wood and MDF |
| Obavezna montaža | Da |
| UPC | 196986145511 |
| ASIN | B0BR7HR4FC |

Slika 7.1: Side view of the Polibi Bunk Bed, highlighting the sturdy construction and guardrail design.
8. Garancija i podrška
Polibi products are manufactured with quality and care. For specific warranty information, please refer to the documentation included with your purchase or visit the official Polibi website.
If you encounter any issues or have questions regarding your Polibi Twin-Over-Full Wooden Bunk Bed with Trundle, please contact Polibi Customer Support:
- Online podrška: Posjetite Polibi Brand Store on Amazon za često postavljana pitanja i opcije kontakta.
- E-pošta/Telefon: Refer to your product packaging or the Polibi webstranicu za najnovije kontakt informacije.





