1. Proizvod je gotovview
Thank you for choosing the Optonica OT6711 IP65 Waterproof LED Batten Light. This high-performance lighting fixture is designed for various applications, offering 55W of bright 6000K daylight white illumination. Its IP65 rating ensures protection against dust and water jets, making it suitable for demanding environments. Additionally, the integrated emergency battery provides essential lighting during power outages, enhancing safety and functionality.
Ključne karakteristike:
- Visoka svjetlina: 55W LED for powerful illumination.
- Dnevno bijelo: 6000K color temperature for clear, crisp light.
- Otporan na vodu i prašinu: IP65 rated for outdoor and challenging indoor environments.
- Baterija za hitne slučajeve: Integrated backup power for continued operation during outages.
- Izdržljiva konstrukcija: Made from aluminum for longevity.
Figure 1: Optonica OT6711 IP65 Waterproof LED Batten Light. This image shows the full length of the white LED batten light, highlighting its sleek, enclosed design suitable for robust environments.
2. Sigurnosna uputstva
Molimo vas da pročitate i razumjete sva sigurnosna uputstva prije instalacije i rada. Nepoštivanje ovih uputstava može dovesti do strujnog udara, požara ili drugih opasnosti.
- električna sigurnost: Ensure the power supply is disconnected before any installation, maintenance, or cleaning. All wiring should be performed by a qualified electrician in accordance with local electrical codes.
- Voltage Kompatibilnost: Proverite da li je zaliha voltage odgovara zahtjevima navedenim na etiketi proizvoda.
- uzemljenje: The fixture must be properly grounded to prevent electric shock.
- IP65 ocjena: While IP65 rated for water and dust resistance, this fixture is not submersible. Do not install in locations where it may be submerged in water.
- Baterija za hitne slučajeve: The emergency battery is designed for temporary backup lighting. Do not attempt to open or replace the battery yourself. Contact qualified personnel for service.
- toplina: The LED fixture may become warm during operation. Do not touch the fixture immediately after prolonged use. Ensure adequate ventilation around the fixture.
- Montaža: Ensure the mounting surface is strong enough to support the weight of the fixture. Use appropriate mounting hardware.
3. Sadržaj paketa
Pažljivo raspakujte kutiju i provjerite da li su svi predmeti prisutni i neoštećeni. Ako bilo koji predmet nedostaje ili je oštećen, obratite se prodavaču.
- Optonica OT6711 LED Batten Light with Emergency Battery
- Mounting Brackets (quantity may vary)
- Screws and Wall Plugs (quantity may vary)
- Korisnički priručnik (ovaj dokument)
4. Postavljanje i instalacija
This fixture is designed for wall mounting. Follow these steps for safe and proper installation.
4.1 Potreban alat
- Bušilica
- Odvijač
- Olovka
- Measuring Tape
- Skidači žice
- Voltage Tester
4.2 Koraci instalacije
- Isključite napajanje: Before starting, ensure the main power supply to the installation area is turned off at the circuit breaker. Use a voltagtesterom kako biste potvrdili da nema napajanja.
- Označite tačke montaže: Hold the batten light or its mounting brackets against the desired wall surface. Use a pencil to mark the drilling points for the mounting brackets. Refer to the dimensions diagram for accurate spacing.
- Izbušite rupe: Drill holes at the marked points using an appropriate drill bit size for the provided wall plugs. Insert the wall plugs into the drilled holes.
- Pričvrstite zagrade: Pričvrstite nosače za montažu na zid pomoću priloženih vijaka.
- Žičana veza: Open the wiring compartment of the batten light (if applicable, refer to internal diagrams). Connect the live (L), neutral (N), and earth (E) wires from your electrical supply to the corresponding terminals on the fixture. Ensure all connections are secure and insulated.
- Učvršćenje: Carefully attach the LED batten light to the secured mounting brackets. Ensure it clicks or locks into place securely.
- Vrati snagu: Once the installation is complete and all connections are checked, restore power at the circuit breaker.
- Initial Charge (Emergency Battery): For the emergency battery to function correctly, allow the fixture to remain powered for at least 24 hours after initial installation to fully charge the battery.
Figure 2: Dimensions of the Optonica OT6711 LED Batten Light. This diagram illustrates the physical measurements of the fixture, showing a length of 1480mm, a width of 61mm, and a height of 72mm, crucial for planning installation space.
5. Uputstvo za upotrebu
The Optonica OT6711 LED Batten Light operates simply once installed and powered.
- Normalan rad: When power is supplied to the fixture, the LED batten light will illuminate. It can be controlled by an external wall switch connected to its power supply.
- Hitni način rada: In the event of a power failure, the integrated emergency battery will automatically activate, providing reduced illumination for a specified duration (typically 1-3 hours, refer to specifications for exact duration). The light will return to normal operation once main power is restored and the battery will begin recharging.
- Indikator statusa baterije: Some models may include a small LED indicator to show the status of the emergency battery (e.g., green for charged, red for charging/fault). Consult the product label if present.
6. Održavanje
Regular maintenance ensures optimal performance and longevity of your LED batten light.
- čišćenje: Isključite napajanje prije čišćenja. Koristite meku,amp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
- inspekcija: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Ensure the mounting is secure.
- Emergency Battery Test: It is recommended to perform a functional test of the emergency battery at least once a month. To do this, temporarily cut the main power supply to the fixture and observe if the emergency lighting activates. Restore power after a short period (e.g., 30 seconds). A full discharge test (allowing the battery to run until depletion) should be performed annually to ensure the battery holds its charge for the specified duration.
- Zamjena komponenti: This fixture contains non-user-replaceable parts. Do not attempt to open the sealed unit or replace LEDs or the emergency battery yourself. Contact qualified service personnel if repair is needed.
7. Otkrivanje problema
If you encounter issues with your Optonica OT6711 LED Batten Light, refer to the following common problems and solutions.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Svjetlo se ne pali (normalan rad) |
|
|
| Emergency light does not activate during power outage |
|
|
| Emergency light duration is shorter than expected |
|
|
| Treperenje ili prigušeno svjetlo |
|
|
If the problem persists after attempting these solutions, please contact Optonica customer support or a qualified electrician.
8. Specifikacije
| Specifikacija | Detalj |
|---|---|
| Brand | Optonica |
| Broj modela | OT6711 |
| Potrošnja energije | 55 Watts |
| Temperatura boje | 6000K (dnevno bijelo) |
| Dužina | 150cm (approximately 1480mm) |
| Materijal | Aluminijum |
| IP Rating | IP65 (vodootporan i otporan na prašinu) |
| Posebna karakteristika | Rezervna baterija za hitne slučajeve |
| Izvor napajanja | Električni kabel |
| Vrsta instalacije | Zidni nosač |
| Boja | Bijelo |
9. Garancija i podrška
Information regarding the specific warranty period and terms for the Optonica OT6711 LED Batten Light was not available in the provided product data. For warranty details, please refer to the product packaging or contact your retailer or Optonica directly.
For technical support, service, or inquiries about spare parts, please contact Optonica customer service through their official webweb stranicu ili kontakt informacije koje ste dobili uz kupovinu.
