Wallpad L6

Wallpad L6 Gold Brushed Aluminum Wall Module User Manual

Model: L6 - Dual USB Charging Module

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of the Wallpad L6 Gold Brushed Aluminum Wall Module, specifically the dual USB charging variant. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

2. Sigurnosna uputstva

3. Sadržaj paketa

Prije početka instalacije provjerite da li su sve komponente prisutne:

Note: Other modules (e.g., EU French Socket, Wall Switch) are sold separately and may have different installation requirements.

4. Postavljanje i instalacija

This section outlines the general steps for installing the Wallpad L6 module. Professional installation is recommended.

  1. Pripremite prostor za instalaciju: Osigurajte da je napajanje područja instalacije isključeno glavnim prekidačem.
  2. Provjerite kompatibilnost: The Wallpad L6 module is designed for an 86 Type Square Box. Round boxes are not compatible.
  3. Povežite ožičenje: Connect the live, neutral, and ground wires to the corresponding terminals on the back of the module. Refer to the wiring diagram provided with the product packaging for specific connections.
  4. Montirajte modul: Carefully place the module into the 86 Type Square Box. Secure it using the provided mounting screws. Ensure the module is flush with the wall surface.
  5. Pričvrstite prednju ploču: Secure the brushed aluminum faceplate onto the module.
  6. Vrati snagu: Nakon što je instalacija završena i svi priključci su sigurni, vratite napajanje na prekidaču.
Nazad view of Wallpad L6 module with dimensions and an 86 Type Square Box

Slika 4.1: Nazad view of the Wallpad L6 module showing dimensions (86mm x 86mm, 60mm depth, 66.5mm screw distance) and an 86 Type Square Box. This module requires an 86 Type Square Box for proper installation; round boxes are not compatible.

5. Operating Instructions (Dual USB Charging Module)

The Wallpad L6 Dual USB Charging Module provides convenient power for charging compatible devices.

Front view of Wallpad L6 dual USB charging module with a red indicator light

Slika 5.1: Front view of the Wallpad L6 dual USB charging module. It features two USB-A ports and a red LED indicator light at the top.

  1. Povežite uređaj: Plug your USB charging cable into one of the two USB-A ports on the module.
  2. Indikacija punjenja: The red indicator light (if present and active) will illuminate to show that the module is powered and ready to charge.
  3. Punjenje: Connect the other end of your USB cable to your compatible electronic device (e.g., smartphone, tablet). The device should begin charging automatically.
  4. Prekini vezu: Nakon što je punjenje završeno, sigurno isključite uređaj, a zatim i USB kabel iz modula.

Note: The Wallpad L6 series also offers other modules like EU French Sockets and Wall Switches, which operate according to their specific functions. The images below illustrate examples of these other modules within the L6 series.

Wallpad L6 EU French Socket module installed in a room setting

Slika 5.2: Bivšiample of a Wallpad L6 EU French Socket module, showcasing its design within a living space.

Wallpad L6 wall switch module with a satin aluminum panel and illuminated buttons

Slika 5.3: Bivšiample of a Wallpad L6 wall switch module, featuring a satin aluminum panel and illuminated touch buttons.

6. Održavanje

7. Otkrivanje problema

ProblemMogući uzrokRješenje
Module not charging devices.
  • Nema napajanja modula.
  • Neispravan USB kabl ili uređaj.
  • Aktivirana zaštita od preopterećenja.
  • Provjerite prekidač i uvjerite se da je napajanje uključeno.
  • Pokušajte s drugim USB kabelom ili uređajem.
  • Disconnect devices, wait a few minutes, then reconnect.
Module is loose in the wall.Nepravilna montaža.Disconnect power, tighten mounting screws. Ensure an 86 Type Square Box is used.
Red indicator light is off.Nema napajanja modula.Check circuit breaker and wiring connections. Consult a qualified electrician if necessary.

8. Specifikacije

9. Garancija i podrška

For warranty information and technical support, please refer to the documentation included with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.

For further assistance, you may visit the official Wallpad webstranice ili kontaktirajte njihov odjel za korisničku podršku.

Povezani dokumenti - L6

Preview Home Use 86-type Wall Mount Box Installation Instructions
Detailed installation instructions for the Home Use 86-type Wall Mount Box by WenZhou Wallpad Electric Co.,LTD, covering concealed and surface-mounted methods, safety precautions, and product limitations.
Preview Wallpad European Standard Switches & Sockets User Manual
Comprehensive user manual for Wallpad European Standard Switches & Sockets, covering safety information, product overview, technical specifications, installation instructions, operation, maintenance, compliance, and warranty.
Preview Konfiguracije ožičenja prekidača za svjetlo: jednosmjerno, dvosmjerno i srednje
Detaljan vodič za razumijevanje i implementaciju jednosmjernih, dvosmjernih i međusmjernih konfiguracija ožičenja za prekidače za svjetlo, uključujući tekstualne opise dijagrama i komponenti.