1. Uvod i krajview
The Enthuze ENT-TD6000 is a versatile device designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank. It also includes integrated LED light functions for various situations.
Ključne karakteristike uključuju:
- Inflatable Function: Capable of inflating car tires, motorcycle tires, bicycle tires, air mattresses, water toys, and sports balls.
- Car Jump Start: Designed to jump-start 12V vehicle batteries using the included cables.
- Mobile Power Supply: Can charge/power cell phones, tablets, game consoles, cameras, and other digital smart devices.
- Funkcije LED svjetla: Features multiple LED light modes for illumination and signaling.
Figure 1: Enthuze ENT-TD6000 Jump Starter and included accessories.
2. Postavljanje i početna upotreba
2.1 Punjenje uređaja
Before first use, fully charge the Enthuze ENT-TD6000. Connect the device to a suitable power source using the provided USB-C cable. The display will indicate the charging status. A full charge typically takes approximately 3.5 hours.
2.2 Connecting Jump Start Cables
To prepare for jump-starting, ensure the jump starter is adequately charged. Connect the smart battery clamp to the jump starter's designated port. The device will indicate readiness.
Video 1: Demonstration of connecting the smart battery clamp and jump-starting a vehicle.
3. Uputstvo za upotrebu
3.1 Pokretanje vozila skokom
- Uvjerite se da je starter potpuno napunjen.
- Povežite pametnu bateriju clamp to the jump starter.
- Pričvrstite crveni (+) clamp na pozitivni pol akumulatora vozila.
- Pričvrstite crni (-) clamp to the negative terminal of the vehicle's battery or a solid, unpainted metal part of the engine block.
- Press the switch button on the jump starter to activate the jump-start function.
- Pokrenite motor vozila.
- Čim se vozilo pokrene, odmah uklonite klapnuamps from the vehicle battery, then disconnect the smart battery clamp sa startera.
This device is suitable for jump-starting vehicles with up to 8.0L gasoline engines and 6.0L diesel engines, including small cars, SUVs, pickup trucks, motorcycles, and boats.
3.2 Korištenje zračnog kompresora
- Screw the air hose into the designated port on the jump starter.
- Connect the other end of the air hose to the tire valve or the item to be inflated.
- Use the '+' or '-' buttons to set the desired air pressure.
- Press and hold the switch button for 3 seconds to start the inflation process.
- The device will automatically stop when the set pressure is reached.
- Disconnect the air hose from the item and the jump starter.
3.3 Korištenje kao Power Bank
The Enthuze ENT-TD6000 features USB output ports to charge various electronic devices:
- USB izlaz 1: 5V=3A, 9V=2A, 12V=1.5A
- USB izlaz 2: 5V=2.1A
Connect your device to the appropriate USB port using a compatible charging cable.
3.4 Funkcije LED svjetla
The device includes multiple LED light modes:
- Stabilno svjetlo: Za opšte osvjetljenje.
- SOS način rada: Za hitnu signalizaciju.
- Strobe svjetlo: Za privlačenje pažnje.
Press the light button to cycle through the different modes.
4. Održavanje
To ensure the longevity and optimal performance of your Enthuze ENT-TD6000, follow these maintenance guidelines:
- Redovno punjenje: Punite uređaj svaka 3-6 mjeseci, čak i ako se ne koristi, kako biste održali zdravlje baterije.
- Skladištenje: Store the device in a cool, dry place. The recommended storage temperature should not be lower than -10°C or higher than 50°C. Extreme temperatures can shorten the product's life and damage the built-in battery.
- čišćenje: Use a soft, dry cloth to clean the exterior of the device. Do not use harsh chemicals or abrasive materials.
- Inspekcija kablova: Periodically inspect the jump start cables and air hose for any signs of wear, damage, or corrosion. Replace if necessary.
Figure 2: Product with accessories and important warnings.
5. Otkrivanje problema
Pogledajte donju tabelu za uobičajene probleme i njihova rješenja:
| Poruka o grešci | Uzrok | Rješenje |
|---|---|---|
| GREŠKA | Jumper cables connected with reversed polarity to the car battery. | Priključite bateriju clamps to the correct positive and negative terminals. |
| LOW | Ispravno priključen akumulator automobila, ali zapremina baterijetage is below 9V, and the core temperature is above 0°C/32°F. | BOOST button for 2 seconds to use the forced boost function. |
| OUT IN | High-temperature protection activated, displaying core temperature overheating. | The product activates temperature protection below 50°C/122°F and resumes output when the temperature drops to 45°C/113°F. |
| IN | Low-temperature protection activated. | The product activates temperature protection below -10°C/-4°F and resumes output at 0°C/32°F-37°F. |
| START | Buzzer sounding, silence after 30 seconds. | Overcurrent detected, stop starting vehicle, disappear for 30S. |
| START | Vehicle start detected more than 5 times within 10 minutes, buzzer sounds buzzer mutes after 30S "START" continues to flash. | Stop starting the vehicle and the safety mode disappears after 10 minutes. |
6. Specifikacije
Detailed technical specifications for the Enthuze ENT-TD6000:
| Parametar | Vrijednost |
|---|---|
| Naziv proizvoda | Skočni starter sa zračnim kompresorom |
| Model | ENT-TD6000 |
| Veličina | 193 x 110 x 53 mm |
| Raspon pritiska inflacije | 0.2-8 bar / 3-120 psi |
| Radna temperatura | Charge: 0°C~45°C, Discharge: -10°C~45°C |
| Temperatura skladištenja | -10°C~50°C |
| Inflatable Hose Length | 435mm (including air nozzle) |
| Kapacitet baterije | 41.44Wh (14.8V, 2.8Ah) |
| Working Noise | Manje od 80 dB udaljen od 1 metra |
| Ulaz za punjenje | 5V=3A |
| Vrijeme punjenja | Oko 3.5 sati |
| USB izlaz 1 | 5V=3A, 9V=2A, 12V=1.5A |
| USB izlaz 2 | 5V=2.1A |
| Air Pressure Sensor Accuracy | ±1psi |
| Start Car Voltage | 12V |
| Start Car Current | 500A (1000A Peak) |
Figure 3: Basic Parameters of the Enthuze ENT-TD6000.
7. Važna sigurnosna upozorenja
- Do not overcharge the internal battery. Refer to the instruction manual for proper charging procedures.
- Do not smoke, strike a match, or cause a spark in the vicinity of the power pack during operation.
- Internu bateriju punite samo u dobro provetrenom prostoru.
- Turn off the 12V firing output when the remaining power of the device's battery cell is less than 20%. USB port can output normally.
- Rizik od povreda osoba. Nemojte koristiti ovaj proizvod ako su kabl za napajanje ili kablovi baterije na bilo koji način oštećeni.
- Ovaj uređaj nije predviđen za upotrebu u komercijalnim servisima.
- Ovaj uređaj je predviđen za skladištenje u zatvorenom prostoru kada se ne koristi. Ovaj uređaj se ne smije skladištiti niti ostavljati na otvorenom kada se ne koristi.
- Ovaj uređaj je namijenjen za privremenu upotrebu na otvorenom i treba biti oprezan kada se ovaj uređaj koristi u vlažnim uvjetima.
8. Garancija i podrška
For warranty information or technical support, please contact Enthuze Automotive Products directly. Keep your purchase receipt as proof of purchase.
