1. Sigurnosne informacije
- Uvek nosite zaštitne naočare tokom instalacije.
- Sa staklenim pločama rukujte izuzetno pažljivo. Kaljeno staklo je čvrsto, ali se može razbiti ako se udari po rubovima.
- Ensure the installation area is clear of obstructions and debris.
- Za optimalnu sigurnost i performanse preporučuje se profesionalna instalacija.
- Do not use abrasive cleaners or tools that could scratch the glass or finish.
2. Sadržaj paketa
Before beginning installation, verify that all parts are present and undamaged. Refer to the parts diagram in your included manual for specific component identification.
- Tempered Glass Panel (1/4 inch clear)
- Wall Profiles (Matte Black)
- Door Handle (Matte Black)
- Water Retaining Strips (Bottom and Magnetic)
- Screws, Wall Plugs, and Screw Covers
- Installation Hardware (Hinges, etc.)
3. Potreban alat
- Drill (with 6mm / 0.2362 inch drill bit for tile/masonry)
- Hammer
- Odvijač (preporučuje se križni odvijač)
- Measuring Tape
- Nivo
- Olovka ili marker
- Silicone Sealant (mold-resistant, waterproof)
- Caulking Gun
- Utility Knife
4. Upute za instalaciju
This section provides a step-by-step guide for installing your ELEGANT Pivot Shower Door. For a visual guide, please refer to the official installation video below.
Official ELEGANT Pivot Shower Door Installation Steps video. This video demonstrates the complete installation process for the FP series shower enclosure.
Koraci instalacije:
- Position and Mark Wall Profiles:
Postavite zidni profile (S10) vertically on the wall according to your model size. Mark the wall with the hole positions on the profile. Ensure the profile is perfectly level. Mark hole positions on the wall using the wall profile, making sure holes are not too close to tile edges.
Image: Reversible installation options for the shower door, showing how it can be configured for left or right opening.
Image: Detail of the width adjustment feature, allowing up to 0.75 inches of adjustment on each side for a precise fit.
- Drill Holes and Insert Wall Plugs:
Drill holes at your marked positions with a 6mm (millimeter) drill bit (0.2362''). Insert the wall plugs (S02) into the holes with a hammer.
- Attach Wall Profiles:
Pričvrstite zidni profile to the wall with screws (S03) and put on the screw cover. Repeat the same operation on the other side.
- Insert Fixed Panel:
Insert the fixed panel into the wall profile (S09).
- Secure Fixed Panels:
Secure the fixed panels with wall profiles using screws (S04, S05), then put on the decorative covers.
- Install Bottom Water Retaining Strip:
Install the bottom water retaining strip (S12) along the base of the fixed panel.
Image: The bottom seal strip ensures water retention, keeping your bathroom dry.
- Install Magnetic Water Retaining Strips:
Install the magnetic water retaining strips (S08) on the door panel.
Image: Detail of the magnetic strip, providing a secure closure and preventing water spillage.
- Ugradnja ručki:
Install the handles (S11) on the moving panels.
Image: The durable stainless steel handle provides a simple and reliable way to open and close the door.
- Apply Silicone Sealant:
Apply silicone sealant to the outside edges of the profiles. Allow at least 24 hours for the sealant to dry before use. This step is crucial for a watertight seal.
Advanced Installation Tips (from user experience):
- Pre-Caulking for Stronger Seal: Instead of caulking at the very end, apply two thick beads of mold-resistant silicone caulk to the backside of the wall profile that goes against the tile wall. Gently press the profile against the wall, allowing the caulk to squish out. Then, screw the profile into place. This creates a uniform, 100% watertight seal behind the entire length and width of the railing, distributing the door's weight more effectively. Clean off excess caulk immediately.
- Vrijeme stvrdnjavanja: After pre-caulking and securing the first wall profile, allow at least 24 hours for the caulk to fully cure before proceeding with hanging the door or installing other components. This ensures maximum strength and waterproofing.
- Adjusting for Uneven Walls: The door-hinge railing does not have to go all the way inside the wall railing. You can gain additional width (e.g., 1/2 inch) by partially inserting the door-hinge railing into the wall-mount railing. Use this flexibility to achieve a perfectly level and aligned door, especially if your shower walls are not perfectly straight or level. Remember to caulk all joints between metal pieces with clear silicone before tightening screws.
5. Uputstvo za upotrebu
The ELEGANT Pivot Shower Door is designed for smooth and easy operation.
- To open the door, gently pull the handle outwards. The door pivots up to 90 degrees, providing a wide walk-in opening.
- To close the door, push the handle inwards until the magnetic strips engage, securing the door in the closed position.
- The door is reversible for left or right-hand installation, allowing flexibility to suit your bathroom layout.
Image: The pivot door partially open, illustrating its smooth swing mechanism.
Image: The shower door fully open, showcasing the generous entry space.
6. Održavanje i čišćenje
Proper care will ensure the longevity and appearance of your shower door.
- Čišćenje stakla: Clean glass panels regularly with a soft cloth and a non-abrasive glass cleaner. Avoid cleaners containing harsh chemicals, ammonia, or abrasive particles.
- Čišćenje hardvera: Wipe down metal profiles and handles with a soft, damp cloth. For stubborn spots, use a mild, non-abrasive cleaner specifically designed for metal finishes.
- Održavanje zaptivki: Periodically inspect the water retaining strips and silicone seals for wear or damage. Replace them if necessary to maintain a watertight enclosure.
- Izbjegavajte abrazive: Never use abrasive brushes, scouring pads, or harsh chemicals on any part of the shower door, as this can damage the finish and glass.
7. Otkrivanje problema
If you encounter any issues with your shower door, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Curenje vode sa dna ili sa strane. | Improperly installed or damaged water retaining strips/seals; insufficient silicone sealant. | Ensure all water retaining strips are correctly seated. Reapply silicone sealant to exterior joints, allowing 24 hours to cure. Check for gaps in the bottom seal strip. |
| Vrata se ne zatvaraju sigurno. | Misaligned magnetic strips; obstruction. | Check if the magnetic strips are aligned properly. Adjust the wall profiles slightly if needed (within the adjustment range) to ensure a tight seal. Remove any obstructions. |
| Door feels loose or wobbly. | Loose screws in wall profiles or hinges. | Carefully tighten all screws securing the wall profiles and hinges. Do not overtighten. |
| Difficulty opening or closing the door. | Hinges require lubrication; misalignment. | Apply a small amount of silicone-based lubricant to the hinges. Check for proper alignment of the door panel within the frame. |
8. Specifikacije
- Brand: ELEGANT
- Model: FP30-CO
- Dimenzije: 0.25 x 30 x 72 inches (Glass thickness x Width x Height)
- Walk-in Opening: 23 inča
- Materijal: 1/4 inch (6mm) Clear Tempered Glass (ANSI Z97.1 certified), Aluminum Profiles
- završiti: Mat crna
- Težina artikla: 46.9 funte
- Podesivost: 0.75 inches (19mm) on each side for width adjustment
- ljuljanje vrata: Outward up to 90 degrees
9. Garancija i podrška
ELEGANT stands behind the quality of its products. For specific warranty details, please refer to the documentation included with your purchase.
If you require assistance with online orders or product support, please:
- Tap "Your Account" - "Order Detail" - "Message Center" on the platform where you made your purchase.
- You may also reach us through email at sunnyshowerusa@gmail.com.
Thank you for being a valued ELEGANT customer.
