1. Uvod
This manual provides essential information for the installation, operation, and maintenance of your FireAngel FA6115-FRT Optical Smoke Detector. Designed for home and caravan use, this detector features an advanced optical sensor for early detection of slow-burning fires and is a direct replacement for the ST-625 model. Please read these instructions carefully before installation and retain them for future reference.
Slika 1: Prednja strana view of the FireAngel FA6115-FRT Optical Smoke Detector.
Slika 2: Bočna strana view of the FireAngel FA6115-FRT Optical Smoke Detector, showing the ventilation grilles.
2. Sigurnosne informacije
- This smoke detector is designed to detect smoke. It cannot prevent fires.
- Regularly test your smoke detector as described in this manual.
- Do not paint the smoke detector. Paint can block the smoke entry points and interfere with the sensor's ability to detect smoke.
- Ne pokušavajte sami popraviti uređaj. Za informacije o servisiranju pogledajte odjeljak o garanciji.
- Ensure batteries are installed correctly and replaced when indicated by the low battery warning.
3. Sadržaj paketa
Provjerite da li se sve stavke nalaze u vašem paketu:
- FireAngel FA6115-FRT Optical Smoke Detector
- Montažna platforma
- 2 x AA baterije
- Screws and Anchors for installation
- Korisnički priručnik (ovaj dokument)
Figure 3: Package contents including the detector, mounting plate, batteries, and manual.
4. Postavljanje i instalacija
4.1 Odabir lokacije
For optimal protection, install smoke detectors in all rooms, especially bedrooms and hallways leading to sleeping areas. Avoid placing detectors in or near:
- Kitchens or bathrooms, due to steam and cooking fumes that can cause false alarms.
- Areas with high humidity or extreme temperatures.
- Within 50 cm (20 inches) of walls or corners when mounted on the ceiling.
- Near ventilation outlets or fans that could prevent smoke from reaching the detector.
The FA6115-FRT is an optical smoke detector, highly effective at detecting slow-burning fires, which produce thick, visible smoke. For comprehensive fire safety, consider installing a heat alarm in the kitchen and a carbon monoxide alarm where fuel-burning appliances are present.
Slika 4: Prample of a smoke detector installed on a ceiling in a hallway, a recommended location.
4.2 Upute za montažu
- Pripremite montažnu površinu: Choose a flat ceiling or wall surface. Use the mounting platform as a template to mark the screw holes.
- Izbušite rupe: Drill two holes at the marked positions. Insert the provided anchors if installing into drywall or plaster.
- Attach Mounting Platform: Secure the mounting platform to the ceiling or wall using the provided screws.
- Instalirajte baterije: Open the battery compartment on the back of the detector. Insert the two AA batteries, ensuring correct polarity (+/-).
- Pričvrstite detektor: Align the detector with the mounting platform. Push and twist the detector clockwise until it clicks securely into place.
- Početni test: Press and hold the large 'TEST' button on the front of the detector for a few seconds. The alarm should sound loudly, and the red LED should flash. This confirms the unit is functioning correctly.
Figure 5: The removable mounting plate is secured to the ceiling or wall using screws.
Figure 6: The battery compartment requires two AA batteries, which are included.
5. Uputstvo za upotrebu
5.1 Normalan rad
Under normal operating conditions, the red LED indicator will flash approximately once every 45 seconds to indicate that the detector is powered and functioning correctly.
5.2 Dugme Test/Silence
The large central button serves two primary functions:
- testiranje: Press and hold the button for a few seconds to perform a functional test. The alarm will sound, and the red LED will flash rapidly. This should be done monthly.
- Utišavanje: In the event of a known false alarm (e.g., from cooking fumes), press the button briefly to temporarily silence the alarm for approximately 10 minutes. The detector will automatically reset after this period.
Figure 7: The central button is used for testing the alarm and silencing false alarms.
5.3 Sleep Easy™ Function (Low Battery Silence)
If the batteries are low, the detector will emit a short chirp approximately every 45 seconds, accompanied by a red LED flash. If this occurs during the night, you can activate the Sleep Easy™ function:
- Press the 'TEST' button once. The low battery chirp will be silenced for 8 hours.
- The red LED will continue to flash, indicating the low battery status.
- Even in Sleep Easy™ mode, the detector remains active and will sound the alarm if smoke is detected.
- Replace the batteries as soon as possible, ideally within 30 days of the first low battery warning.
Figure 8: The Sleep Easy function allows temporary silencing of low battery chirps for 8 hours.
Figure 9: The optical sensor detects smoke particles entering the chamber, providing rapid detection for slow-burning fires.
6. Održavanje
6.1 Monthly Testing
Test your smoke detector at least once a month by pressing and holding the 'TEST' button until the alarm sounds. This ensures the unit is functioning correctly.
6.2 Čišćenje
Dust and debris can accumulate on the detector, potentially affecting its performance. Clean your smoke detector every 3-6 months:
- Gently vacuum around the detector's casing and ventilation openings using a soft brush attachment.
- Do not use cleaning sprays or solvents on the detector.
6.3 Zamjena baterije
The FA6115-FRT uses two replaceable AA batteries with a typical lifespan of 5 years. When the low battery warning sounds (chirp every 45 seconds), replace both batteries immediately. Refer to Section 4.2 for battery installation steps.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Detector chirps every 45 seconds | Niska baterija | Replace both AA batteries immediately. Use Sleep Easy™ function if chirping occurs at night. |
| False alarms (e.g., during cooking) | Detector too close to kitchen/bathroom, steam, or cooking fumes. | Press the 'TEST' button to silence for 10 minutes. Relocate the detector if false alarms persist due to placement. Ensure proper ventilation during cooking. |
| Alarm se ne oglašava tokom testa | No power, faulty unit, or incorrect battery installation. | Check battery installation and replace if necessary. If the problem persists, the unit may be faulty and requires replacement. |
| Crveni LED ne treperi | Nema napajanja ili je uređaj neispravan. | Ensure batteries are correctly installed and charged. If the issue persists, the unit may be faulty. |
8. Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | FA6115-FRT |
| Tip senzora | Optički (fotoelektrični) |
| Izvor napajanja | Napaja se baterijama |
| Baterije | 2 x AA (included, replaceable) |
| Sastav baterije | Alkalna |
| Život senzora | 10 godine |
| Dimenzije proizvoda (D x Š x V) | 11.81 x 11.81 x 3.15 cm |
| Prečnik | 118.1 mm |
| Težina | 70 grama |
| Materijal | Plastika |
| Boja | Bijelo |
| Metoda instalacije | Wall or Ceiling (screws and anchors provided) |
| Radna temperatura | Do 38°C |
| Operativna vlažnost | Do 90% RH (bez kondenzacije) |
| Certifikati | CE certified, EN 14604:2005+AC:2008 compliant |
Figure 10: Technical drawing showing the dimensions of the FireAngel FA6115-FRT detector.
9. Garancija i podrška
9.1 Garancija proizvođača
The FireAngel FA6115-FRT Optical Smoke Detector comes with a 10-godišnja garancija proizvođača od datuma kupovine. Ova garancija pokriva nedostatke u materijalu i izradi pri normalnoj upotrebi. Molimo sačuvajte dokaz o kupovini za reklamacije.
9.2 Korisnička podrška
If you experience any issues with your smoke detector that cannot be resolved using the troubleshooting guide, or for warranty inquiries, please contact FireAngel customer support. Refer to the FireAngel official webnajnovije kontakt informacije potražite na web-mjestu ili pakiranju proizvoda.
Napomena: Do not attempt to open or repair the unit yourself, as this may void the warranty and compromise the device's safety features.
