1. Uvod
This manual provides essential information for the safe and efficient operation of your BYGD 3000W Power Inverter. Please read these instructions thoroughly before installation and use, and retain them for future reference. This device converts 12V DC power from a battery into 110V/120V AC household power, suitable for various electronic devices and appliances.
Image 1.1: The BYGD 3000W Power Inverter, showcasing its compact design and included battery connection cables.
2. Karakteristike i komponente proizvoda
Ključne karakteristike:
- Velika izlazna snaga: Provides 3000W continuous DC to AC power and up to 6000W peak power.
- Više prodajnih mjesta: Equipped with 4 standard North American AC outlets.
- Punjenje putem USB-a i USB-C kabla: Includes 5V/3.1A USB ports and 9V/1.67A Type-C ports for charging mobile devices.
- Napredna sigurnosna zaštita: Features protection against over voltage, niska voltage, overload, short circuit, over heat, and over charge.
- Efikasno hlađenje: Built-in smart silent cooling fans minimize noise and extend product life.
- Kompaktan dizajn: Easy to carry and store for various applications.
Komponente proizvoda:
Image 2.1: Detailed diagram illustrating the various ports, indicators, and controls on the BYGD 3000W Power Inverter.
- AC utičnice: 4 standard North American AC outlets.
- USB-A i USB-C portovi: Za punjenje kompatibilnih uređaja.
- Dugme za uključivanje/isključivanje: To turn the inverter on or off.
- Battery Mode Switch: Selects between different battery modes (if applicable).
- Indikator napajanja (zeleni): Illuminates when the inverter is operating correctly.
- Lithium Battery Working Mode (Blue Light): Indicates operation in lithium battery mode.
- Fault Indicator (Red Light): Illuminates to indicate an error or protection mode.
- Zaštita od preopterećenja: Resetirajući prekidač za zaštitu od preopterećenja.
- Cable Connection Port: Terminals for connecting to the 12V DC power source.
- ventilatori za hlađenje: Integrisani ventilatori za upravljanje temperaturom.
- Ground Connection End: Za sigurnosno uzemljenje.
- Pozitivni terminal: Red terminal for positive battery connection.
- Negativni terminal: Black terminal for negative battery connection.
3. Sigurnosne informacije
WARNING: Failure to follow these safety instructions may result in injury, damage to the inverter, or damage to connected devices.
- Ne otvarajte inverter casing. Unutra nema dijelova koje korisnik može sam servisirati.
- Osigurajte odgovarajuću ventilaciju oko invertera. Ne blokirajte otvore za hlađenje.
- Keep the inverter away from water, moisture, flammable materials, and corrosive substances.
- Connect the inverter only to a 12V DC power source. Do not connect to 24V or 48V systems.
- Always connect the inverter to the battery before connecting any AC appliances.
- Osigurajte ukupan vattage of connected AC appliances does not exceed the inverter's continuous power rating (3000W).
- Use appropriate gauge cables for battery connection to prevent overheating.
- Pravilno uzemljite inverter u skladu s lokalnim električnim propisima.
- Disconnect the inverter from the battery when not in use to prevent battery drain.
Image 3.1: Visual representation of the comprehensive protection functions integrated into the BYGD Power Inverter.
4. Podešavanje
4.1 Šta se nalazi u kutiji:
- BYGD 3000 Watt Power Inverter
- Battery connection cables (red for positive, black for negative)
- Korisnički priručnik (ovaj dokument)
4.2 Connecting the Inverter to a 12V Battery:
- Ensure the inverter's power switch is in the 'OFF' position.
- Povežite crvena kabel baterije do pozitivno (+) terminal of the inverter.
- Povežite crna kabel baterije do negativno (-) terminal of the inverter.
- Povežite drugi kraj crvena kabl za pozitivno (+) terminal vaše 12V baterije.
- Povežite drugi kraj crna kabl za negativno (-) terminal vaše 12V baterije.
- Ensure all connections are tight and secure to prevent arcing or poor performance.
- Connect the ground wire from the inverter's ground connection end to a suitable chassis ground point (e.g., vehicle chassis or earth ground).
Image 4.1: Illustration of the inverter's dimensions and the components typically included in the package, such as battery clamps and the user manual.
5. Uputstvo za upotrebu
5.1 Uključivanje/isključivanje:
- After securing all battery connections, press the power switch button on the inverter to turn it 'ON'.
- The green power indicator light should illuminate, indicating the inverter is operational.
- To turn off the inverter, press the power switch button again. The green indicator light will turn off.
5.2 Connecting AC Devices:
- Ensure the AC appliance you wish to power is within the inverter's continuous wattage snaga (3000W).
- Plug the AC appliance into one of the 4 AC outlets on the inverter.
- Turn on the AC appliance.
- If the inverter's fault indicator (red light) illuminates or an audible alarm sounds, immediately disconnect the appliance and refer to the Troubleshooting section.
5.3 Using USB and Type-C Ports:
- Connect your USB or Type-C compatible device to the respective port on the inverter.
- The inverter will automatically provide power for charging.
Slika 5.1: Primjeramples of common household and portable electrical appliances that can be powered by the BYGD Power Inverter.
6. Održavanje
- čišćenje: Periodically clean the exterior of the inverter with a dry, soft cloth. Do not use liquids or abrasive cleaners. Ensure cooling vents are free from dust and debris.
- Veze: Regularly check battery cable connections for tightness and corrosion. Clean any corrosion with a wire brush and baking soda solution.
- Skladištenje: When not in use for extended periods, store the inverter in a cool, dry place, away from direct sunlight and extreme temperatures. Disconnect it from the battery.
- Održavanje baterije: Ensure your 12V battery is properly maintained and charged to prolong its lifespan and the inverter's performance.
7. Otkrivanje problema
If you encounter issues with your BYGD Power Inverter, refer to the table below for common problems and their solutions.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Inverter se ne uključuje. | Labavi kontakti baterije, nizak napon baterijetage, faulty power switch. | Check battery cable connections. Ensure battery voltage is above 11V. Try pressing the power switch firmly. |
| Red fault indicator light is on. | Overload, over-temperature, low/high input voltage, kratki spoj. | Reduce load. Allow inverter to cool. Check battery voltage. Disconnect all loads and restart. |
| Nema AC izlaza. | Inverter off, low battery, appliance fault, overload protector tripped. | Turn inverter on. Charge battery. Test appliance directly. Reset overload protector if tripped. |
| Cooling fan is constantly running or very loud. | High internal temperature, heavy load. | Ensure adequate ventilation. Reduce load. This is normal operation under heavy load. |
| USB/Type-C portovi se ne pune. | Inverter off, device not compatible, cable fault. | Ensure inverter is on. Try a different device or cable. |
8. Specifikacije
| Feature | Specifikacija |
|---|---|
| Broj modela | P3000U-Red |
| Kontinuirana snaga | 3000 Watts |
| Peak Power | 6000 Watts |
| Ulazni voltage | 12V DC |
| Output Voltage | 110V/120V AC |
| AC utičnice | 4 Standard North American |
| USB izlaz | 5V/3.1A |
| Izlaz tipa C | 9V/1.67A |
| Dimenzije proizvoda | 15.1 x 9.4 x 5.1 inča |
| Težina artikla | 8.52 funte |
| Proizvođač | BYGD |
9. Garancija i podrška
9.1 Informacije o garanciji:
BYGD products are designed and manufactured to high-quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or contact BYGD customer support. Keep your purchase receipt as proof of purchase for warranty claims.
9.2 Podrška korisnicima:
If you have any questions, require technical assistance, or need to report an issue with your BYGD 3000W Power Inverter, please contact BYGD customer support. Contact information can typically be found on the BYGD official webweb-mjestu ili na ambalaži proizvoda.
